Lindy 901598101

This range of USB 2.0 Type A to Lightning cables provide a reliable and effective charging solution for iPhones, iPads and other Apple devices, utilising not only a reinforced shielding and jacket structure but also an optimum strain relief, tested to bend over 100,000 times before failure. A revolutionary resistant yet flexible solution to preventing splitting and snapping.The cable also comes supplied with a Lindy hook-and-loop tie wrap, providing a neat, handy solution to avoid the cable tangling.MFi Certified:- This product has been certified under the Apple MFi programme. Made for iPhone/iPad/iPod logos communicate to customers that an electronic accessory has been designed to connect specifically to iPhone, iPad or iPod, and has been certified by the developer to meet Apple performance standards.Features:- High strength USB 2.0 charge and sync cable for iPhones, iPads and other Apple devices with Lightning connection- Cotton braiding and optimized strain relief to withstand over 100,000 bending cycles- Apple MFi-certified, uses the C89 Lightning connector- Supplied with a complimentary hook-and-loop tie wrap to avoid cable tanglingSpecifications:Connectors:- Connector A: USB 2.0 Type A Male- Connector B: Lightning C89 Male- Housing Material: PVC- Connector Plating: Nickel- Pin Construction: Brass- Pin Plating: Gold- Dimensions (approx.) WxDxH:- A: 40x15.6x7.8mm (1.57x0.61x0.31in)- Lightning: 37.5x10.6x6mm (1.48x0.42x0.24in)Cable Construction:- Length: 2m (6.56ft)- Standard: USB 2.0- Type: Round- Jacket Diameter: 4.2mm (0.17in)- Jacket Material: PVC- Conductor Material: Tinned Copper- Conductor Gauge Power: 20AWG- Conductor Gauge Data: 28AWG- Shielding: Tinned Copper Braid- Supported Bandwidth: 480Mbps- Minimum Bend Radius: 38mm (1.5in)- Operating Temperature: 0°C - 40°C (32°F - 104°F)- Storage Temperature: -10°C - 60°C (14°F - 140°F)