Buy Lindy 70m Cat.6 4 Port HDMI 4K30 and IR Splitter Extender with Loop Out 38155
When you make a purchase through links on our site, we may receive a affiliate commission.
Lindy 70m Cat.6 4 Port HDMI 4K30 and IR Splitter Extender with Loop Out 38155
70M Cat.6 4 Port Hdmi & Ir Splitter Extender With Loop OutThe Lindy 70M Cat.6 4 Port Hdmi & Ir Splitter Extender Is A Simple... moreTo Use Plug And Play Solution That Allows Users To Extend An Hdmi Signal Up To 70M And Then Distribute That Signal To Four Displays Using Low Cost Cat.6 Uutp Cable (Not Included). For Added Convenience Ir Signals (20-60Khz) Can Also Be Extended Using The Supplied Ir Receiver And Emitter Cables.Supporting Resolutions Up To 1920X1080 Including 1080P 3D The Splitter Extender Is Designed For Use In Av And Digital Signage Applications For A Variety Of Settings Such As Home Education Business Retail And Healthcare.An Integrated Hdmi Loop-Through Output On The Transmitter Unit Enables Simultaneous Viewing So That A Local Display Can Be Connected For Monitoring Or To Create An Additional Viewing Zone. For Larger Installations The Hdmi Loop-Through Port Can Also Be Used To Cascade Up To 3 Transmitters Allowing Up To 12 Displays To Be Connected To A Single Source.The Hdmi Loop-Through Port Also Allows The Splitter Extender To Clone The Edid Of A Connected Display. An Integrated Edid Emulation System Provides 9 Edid Presets For Ultimate Compatibility With A Variety Of Edid Enabled Devices.Power Over Cat.6 (Poc) Functionality Provides Power For The Complete Installation Using Only A Single Power Supply Connected To The Transmitter - A Perfect Solution For Retro Fit Installations Where Receivers May Be Located Away From A Mains Power Supply. For Added Convenience The Splitter Extender’S Slim Design And Integrated Mounting Brackets Make It Easy To Install In Limited Spaces Behind Modern Flat Screen Displays.Please Note: The Quoted Resolutions Are Possible With A Direct Connection Between Transmitter And Receiver Using Good Quality Cat.6 Solid Core Cable. Using A Different Cable Type Introducing Wall Plates Couplers Or Patch Panels Will Result In A Reduction Of Maximum Distances.• An Advanced Splitter Extender That Extends And Distributes Hdmi & Ir Signals To 4 Displays At Distances Of Up To 70M• Supports Resolutions Up To Full Hd 1920X1080 @ 60Hz 4:4:4 8Bit Including 3D• Features A Loop-Through Hdmi Output On The Transmitter For Local Monitoring/Cascading• Supports Power Over Cat.6 (Poc) Only A Single Power Supply Is Required For Operation•Maximum Distance: 70M (164.04Ft) - 1920X1080@ 60Hz 4:4:4 8Bit Cat.6 And 70M Cat.6 4 Port Hdmi & Ir Splitter Extender With Loop OutFeaturesTypeUp To 70M Hdmi Extender
Lindy Lindy 70m Cat.6 4 Port HDMI 4K30 and IR Splitter Extender with Loop Out 38155
An advanced Splitter Extender that extends and distributes HDMI and IR signals to 4 displays at distances of up to 70m Suppor... morets resolutions up to 3840x2160@30Hz 4:4:4 8bit, includingandnbsp;FullHD Features a loop-through HDMI output on the transmitter for local monitoring/cascading Supports power over Cable (PoC), only a single power supply is required for operation 2 year warranty The Lindy 70m Cat.6 4 Port HDMI and IR Splitter Extender is a simple to use plug and play solution that allows users to extend an HDMI signal up to 70m and then distribute that signal to four displays using low cost Cat.6 UUTP cable (not included). For added convenience IR signals (20-60kHz) can also be extended using the supplied IR receiver and emitter cables.Supporting resolutions up to 4K30, including 1080p 3D, the Splitter Extender is designed for use in AV and digital signage applications for a variety of settings such as home, education, business, retail and healthcare.An integrated HDMI loop-through output on the transmitter unit enables simultaneous viewing so that a local display can be connected for monitoring, or to create an additional viewing zone. For larger installations, the HDMI loop-through port can also be used to cascade up to 3 transmitters allowing up to 12 displays to be connected to a single source.The HDMI loop-through port also allows the Splitter Extender to clone the EDID of a connected display. An integrated EDID emulation system provides 9 EDID presets for ultimate compatibility with a variety of EDID enabled devices.Power over Cable (PoC) functionality provides power for the complete installation using only a single power supply connected to the transmitter - a perfect solution for retro fit installations where receivers may be located away from a mains power supply. The power supply is connected via a screw type DC jack, providing a secure and reliable connection, ideal for installations where accidental disconnections could occur. For added convenience the Splitter Extender's slim design and integrated mounting brackets make it easy to install in limited spaces behind modern flat screen displays.Please Note: The quoted resolutions are possible with a direct connection between transmitter and receiver using good quality Cat.6 solid core cable. Using a different cable type, introducing wall plates, couplers or patch panels will result in a reduction of maximum distances. Features Certification CE, FCC, RoHS, REACH LED indicators Yes Product colour Black Maximum digital resolution 1920 x 1080 pixels Cable types supported Cat6 Maximum transfer distance 50 m Connectivity technology Wired Type Transmitter & receiver Transmitter RJ-45 ports quantity (transmitter) 4 Number of displays supported 4 Transmitter local video port type HDMI Transmitter local video port Yes Transmitter video port type HDMI Receiver RJ-45 ports quantity (receiver) 1 Receiver local video port type HDMI Power AC adapter output current 2.5 A AC adapter output voltage 12
The Lindy 70m Cat.6 4 Port HDMI & IR Splitter Extender is a simple to use plug and play solution that allows users to extend... morean HDMI signal up to 50m and then distribute that signal to four displays using low cost Cat.6 UUTP cable (not included).For added convenience IR signals (20-60kHz) can also be extended using the supplied IR receiver and emitter cables.Supporting resolutions up to 4K30, including 1080p 3D, the Splitter Extender is designed for use in AV and digital signage applications for a variety of settings such as home, education, business, retail and healthcare.An integrated HDMI loop-through output on the transmitter unit enables simultaneous viewing so that a local display can be connected for monitoring, or to create an additional viewing zone.For larger installations, the HDMI loop-through port can also be used to cascade up to 3 transmitters allowing up to 12 displays to be connected to a single source.The HDMI loop-through port also allows the Splitter Extender to clone the EDID of a connected display.An integrated EDID emulation system provides EDID presets for ultimate compatibility with a variety of EDID enabled devices.Power over Cable (PoC) functionality provides power for the complete installation using only a single power supply connected to the transmitter.- a perfect solution for retro fit installations where receivers may be located away from a mains power supply.The power supply is connected via a screw type DC jack, providing a secure and reliable connection, ideal for installations where accidental disconnections could occur.For added convenience the Splitter Extender´s slim design and integrated mounting brackets make it easy to install in limited spaces behind modern flat screen displays.Features:- An advanced Splitter Extender that extends and distributes HDMI & IR signals to 4 displays at distances of up to 70m.- Supports resolutions up to 3840x216030Hz 4:4:4 8bit, including Full HD.- Features a loop-through HDMI output on the transmitter for local monitoring/cascading.- Supports power over Cable (PoC), only a single power supply is required for operation.Specifications:- AV Interface:HDMI.- Interface Standard:HDMI 1.4.- Supported Bandwidth:10.2 Gbps.- Maximum Distance:70m (229.66ft):1920x108060Hz.40m (131.23ft):3840x216030Hz 4:4:4 8bit.- Maximum Resolution:3840x216030Hz 4:4:4 8bit.- HDCP Support:HDCP 1.4.- EDID Pass Through:Preset, Cloning Function.- Supported Audio:Up to 7.1 (Pass-through).- IR Support:20-60 kHz.- Transmission Medium:1 x Cat.6 (per receiver).- Special.Features:PoC (Power over Cable) Connectors:- Transmitter Input:HDMI (Female).- Transmitter Output:4 x RJ45 (Female), HDMI (Female), IR (Female).- Receiver Input:RJ45 (Female), IR (Female).- Receiver Ouput:HDMI (Female).- Power:5.5/2.1mm DC Socket Physical Properties:- Dimensions WxHxD:- Transmitter:210x83x17mm (8.27x3.27x0.67in).- Receivers:79x68x17mm (3.11x2.68x0.67in) (per unit).- Housing Material:Metal.- Transmitter:0.443kg (0.98lb).-
Lindy 70m Cat.6 4 Port HDMI 4K30 & IR Splitter Extender with Loop Out
The Lindy 70m Cat.6 4 Port HDMI IR Splitter Extender is a simple to use plug and play solution that allows users to extend an... moreHDMI signal up to 70m and then distribute that signal to four displays using low cost Cat.6 UUTP cable (not included). For added convenience IR signals (20 60kHz) can also be extended using the supplied IR receiver and emitter cables. Supporting resolutions up to 4K30, including 1080p 3D, the Splitter Extender is designed for use in AV and digital signage applications for a variety of settings such as home, education, business, retail and healthcare. An integrated HDMI loop through output on the transmitter unit enables simultaneous viewing so that a local display can be connected for monitoring, or to create an additional viewing zone. For larger installations, the HDMI loop through port can also be used to cascade up to 3 transmitters allowing up to 12 displays to be connected to a single source. The HDMI loop through port also allows the Splitter Extender to clone the EDID of a connected display. An integrated EDID emulation system provides 9 EDID presets for ultimate compatibility with a variety of EDID enabled devices. Power over Cable (PoC) functionality provides power for the complete installation using only a single power supply connected to the transmitter a perfect solution for retro fit installations where receivers may be located away from a mains power supply. The power supply is connected via a screw type DC jack, providing a secure and reliable connection, ideal for installations where accidental disconnections could occur. For added convenience the Splitter Extender s slim design and integrated mounting brackets make it easy to install in limited spaces behind modern flat screen displays. Please Note: The quoted resolutions are possible with a direct connection between transmitter and receiver using good quality Cat.6 solid core cable. Using a different cable type, introducing wall plates, couplers or patch panels will result in a reduction of maximum distances.
70M Cat.6 4 Port Hdmi & Ir Splitter Extender With Loop OutThe Lindy 70M Cat.6 4 Port Hdmi & Ir Splitter Extender Is A Simple To Use Plug And Play Solution That Allows Users To Extend An Hdmi Signal Up To 70M And Then Distribute That Signal To Four Displays Using Low Cost Cat.6 Uutp Cable (Not Included). For Added Convenience Ir Signals (20-60Khz) Can Also Be Extended Using The Supplied Ir Receiver And Emitter Cables.Supporting Resolutions Up To 1920X1080 Including 1080P 3D The Splitter Extender Is Designed For Use In Av And Digital Signage Applications For A Variety Of Settings Such As Home Education Business Retail And Healthcare.An Integrated Hdmi Loop-Through Output On The Transmitter Unit Enables Simultaneous Viewing So That A Local Display Can Be Connected For Monitoring Or To Create An Additional Viewing Zone. For Larger Installations The Hdmi Loop-Through Port Can Also Be Used To Cascade Up To 3 Transmitters Allowing Up To 12 Displays To Be Connected To A Single Source.The Hdmi Loop-Through Port Also Allows The Splitter Extender To Clone The Edid Of A Connected Display. An Integrated Edid Emulation System Provides 9 Edid Presets For Ultimate Compatibility With A Variety Of Edid Enabled Devices.Power Over Cat.6 (Poc) Functionality Provides Power For The Complete Installation Using Only A Single Power Supply Connected To The Transmitter - A Perfect Solution For Retro Fit Installations Where Receivers May Be Located Away From A Mains Power Supply. For Added Convenience The Splitter Extender’S Slim Design And Integrated Mounting Brackets Make It Easy To Install In Limited Spaces Behind Modern Flat Screen Displays.Please Note: The Quoted Resolutions Are Possible With A Direct Connection Between Transmitter And Receiver Using Good Quality Cat.6 Solid Core Cable. Using A Different Cable Type Introducing Wall Plates Couplers Or Patch Panels Will Result In A Reduction Of Maximum Distances.• An Advanced Splitter Extender That Extends And Distributes Hdmi & Ir Signals To 4 Displays At Distances Of Up To 70M• Supports Resolutions Up To Full Hd 1920X1080 @ 60Hz 4:4:4 8Bit Including 3D• Features A Loop-Through Hdmi Output On The Transmitter For Local Monitoring/Cascading• Supports Power Over Cat.6 (Poc) Only A Single Power Supply Is Required For Operation•Maximum Distance: 70M (164.04Ft) - 1920X1080@ 60Hz 4:4:4 8Bit Cat.6 And 70M Cat.6 4 Port Hdmi & Ir Splitter Extender With Loop OutFeaturesTypeUp To 70M Hdmi Extender
The product description is generated based on data from online stores. Before purchasing be sure to verify all information directly with the seller.
