Buy Wiha Torquevario-S ESD Torque Set 0.4Nm - 1Nm 43898
When you make a purchase through links on our site, we may receive a affiliate commission.
Wiha 43898 Torquevario®-S Esd Screwdriver Set 14 Piece (Inc. Case) WHA43898
This 14 Piece Wiha TorqueVario®;-S ESD Screwdriver Set used for controlled fastening at a specific torque on components susceptible to electrostatic discharge. Comes with a factory calibration certificate. Conforms to DIN EN ISO 6789 & IEC 61340-5-1 Standards. Supplied in practical plastic box. Contains the following: 1 x TorqueVario®;-S E... moreSD Screwdriver. Manufactured in line with the IEC 61340-5-1 international standard and thus guarantees maximum protection for electronic components. It has a surface resistance between 106 and 109 ohm and safely channels electrostatic energy away in a controlled fashion. Thanks to its integrated numeric scale and the supplied adjusting tool variable torque settings can be made therefore covering a wide application field. A clearly audible and tactile signal is emitted when triggering the set torque value guaranteeing process-safe work protecting material and eliminating follow-up work. With a release accuracy of ± 6% the torque tool complies with EN ISO 6789 requirements. 1 x 1/4in Bit Holder with ball. 1 x Setting Tool for torque screwdriver. 2 x Standard Slotted Bits: 4.0 & 4.5mm. 2 x Standard Phillips Bits: PH0 & PH1. 2 x Standard Pozidriv Bits: PZ0 & PZ1. 4 x Standard TORX® Bits: T4 T5 T6 & T8.PTDWHA43898
Wiha Torquevario-S ESD Torque Screwdriver Set 43898
This 14 Piece Wiha TorqueVario®;-S ESD Screwdriver Set used for controlled fastening at a specific torque on components susceptible to electrostatic discharge. Comes with a factory calibration certificate. Conforms to DIN EN ISO 6789 & IEC 61340-5-1 Standards. Supplied in practical plastic box. Contains the following: 1 x TorqueVario®;-S ESD... moreScrewdriver. Manufactured in line with the IEC 61340-5-1 international standard and thus guarantees maximum protection for electronic components. It has a surface resistance between 106 and 109 ohm and safely channels electrostatic energy away in a controlled fashion. Thanks to its integrated numeric scale and the supplied adjusting tool, variable torque settings can be made, therefore covering a wide application field. A clearly audible and tactile signal is emitted when triggering the set torque value, guaranteeing process-safe work, protecting material and eliminating follow-up work. With a release accuracy of ± 6%, the torque tool complies with EN ISO 6789 requirements. 1 x 1/4in Bit Holder with ball. 1 x Setting Tool for torque screwdriver. 2 x Standard Slotted Bits: 4.0 & 4.5mm. 2 x Standard Phillips Bits: PH0 & PH1. 2 x Standard Pozidriv Bits: PZ0 & PZ1. 4 x Standard TORX® Bits: T4, T5, T6 & T8.Additional Information:• Set Type: SL/PH/PZ/TX• No. Pieces: 14
Wiha Torquevario-S ESD Torque Screwdriver Set 0.4Nm - 1Nm 43898
This 14 Piece Wiha TorqueVario®;-S ESD Screwdriver Set used for controlled fastening at a specific torque on components susceptible to electrostatic discharge. Comes with a factory calibration certificate. Conforms to DIN EN ISO 6789 & IEC 61340-5-1 Standards. Supplied in practical plastic box. Contains the following: 1 x TorqueVario®;-S ESD... moreScrewdriver. Manufactured in line with the IEC 61340-5-1 international standard and thus guarantees maximum protection for electronic components. It has a surface resistance between 106 and 109 ohm and safely channels electrostatic energy away in a controlled fashion. Thanks to its integrated numeric scale and the supplied adjusting tool, variable torque settings can be made, therefore covering a wide application field. A clearly audible and tactile signal is emitted when triggering the set torque value, guaranteeing process-safe work, protecting material and eliminating follow-up work. With a release accuracy of ± 6%, the torque tool complies with EN ISO 6789 requirements. 1 x 1/4in Bit Holder with ball. 1 x Setting Tool for torque screwdriver. 2 x Standard Slotted Bits: 4.0 & 4.5mm. 2 x Standard Phillips Bits: PH0 & PH1. 2 x Standard Pozidriv Bits: PZ0 & PZ1. 4 x Standard TORX® Bits: T4, T5, T6 & T8.Additional Information:• Set Type: SL/PH/PZ/TX• No. Pieces: 14
This 14 Piece Wiha TorqueVario®;-S ESD Screwdriver Set used for controlled fastening at a specific torque on components susceptible to electrostatic discharge. Comes with a factory calibration certificate. Conforms to DIN EN ISO 6789 & IEC 61340-5-1 Standards. Supplied in practical plastic box. Contains the following: 1 x TorqueVario®;-S ESD... moreScrewdriver. Manufactured in line with the IEC 61340-5-1 international standard and thus guarantees maximum protection for electronic components. It has a surface resistance between 106 and 109 ohm and safely channels electrostatic energy away in a controlled fashion. Thanks to its integrated numeric scale and the supplied adjusting tool, variable torque settings can be made, therefore covering a wide application field. A clearly audible and tactile signal is emitted when triggering the set torque value, guaranteeing process-safe work, protecting material and eliminating follow-up work. With a release accuracy of ± 6%, the torque tool complies with EN ISO 6789 requirements. 1 x 1/4in Bit Holder with ball. 1 x Setting Tool for torque screwdriver. 2 x Standard Slotted Bits: 4.0 & 4.5mm. 2 x Standard Phillips Bits: PH0 & PH1. 2 x Standard Pozidriv Bits: PZ0 & PZ1. 4 x Standard TORX® Bits: T4, T5, T6 & T8.Additional Information:• Set Type: SL/PH/PZ/TX• No. Pieces: 14
This 14 Piece Wiha TorqueVario®-S ESD Screwdriver Set used for controlled fastening at a specific torque on components susceptible to electrostatic discharge. Comes with a factory calibration certificate. Conforms to DIN EN ISO 6789 & IEC 61340-5-1 Standards. Supplied in practical plastic box. Contains the following: 1 x TorqueVario®-S ESD Screwdriver. Manufactured in line with the IEC 61340-5-1 international standard and thus guarantees maximum protection for electronic components. It has a surface resistance between 106 and 109 ohm and safely channels electrostatic energy away in a controlled fashion. Thanks to its integrated numeric scale and the supplied adjusting tool, variable torque settings can be made, therefore covering a wide application field. A clearly audible and tactile signal is emitted when triggering the set torque value, guaranteeing process-safe work, protecting material and eliminating follow-up work. With a release accuracy of ± 6%, the torque tool complies with EN ISO 6789 requirements. 1 x 1/4in Bit Holder with ball. 1 x Setting Tool for torque screwdriver. 2 x Standard Slotted Bits: 4.0 & 4.5mm. 2 x Standard Phillips Bits: PH0 & PH1. 2 x Standard Pozidriv Bits: PZ0 & PZ1. 4 x Standard TORX® Bits: T4, T5, T6 & T8.Additional Information:• Set Type: SL/PH/PZ/TX• No. Pieces: 14
The product description is generated based on data from online stores. Before purchasing be sure to verify all information directly with the seller.
