Buy Wiha Non-Contact Voltage Detector Explosion Protected 12-1000V AC 44309
When you make a purchase through links on our site, we may receive a affiliate commission.
Wiha 44309 Non-Contact Voltage Detector Explosion Protected 12-1000V Ac WHA44309
The Wiha Voltage Detector Explosion Protected is used to detect and locate live electrical cabling and wires breaks and cab... morele interruptions blown fuses defective light bulbs on light chains and single wires.The contactless Wiha voltage tester will give an initial indication of whether an area is live or not thanks to an optical and audible signal. Once the tester is switched on the permanently green LED indicates the tester is ready for use. During the voltage test the LEDs will light up blue (weak) orange or red (strong) depending on the strength of the alternating electric field.The device switches off automatically to save energy if it is not used for four minutes. An integrated flashlight allows the user to illuminate the measurement point in dark environments and can be switched off and on manually for use solely as a flashlight.With its push-on clip the voltage tester snugly fits into any shirt or trouser pocket thanks to its handy size.Suitable for all socket variants worldwide thanks to its measurement tip suited to international usage. Designed for CAT IV 1 000 VAC the single-pole voltage tester complies with EN 61010-1 / IEC 61326. The voltage tester should be tested on a known voltage source before and after every use to ensure it functions correctly. Specifications: Voltage V AC (min. – max.): 12-1000V.Protection Class: IP 67.Operating Temperature: -20 - 40°C.Power: 2 x AAA Batteries (supplied).PTDWHA44309
Wiha Non-Contact Voltage Detector Explosion Protected 12-1000V AC 44309
The Wiha Non-Contact Voltage Detector is a CAT IV rated testing device designed for electricians and contractors working with... morelive electrical systems from 12V to 1000V AC. This explosion-protected voltage tester provides contactless detection of live cables, cable breaks, blown fuses and defective bulbs through optical and audible signals, making it an essential safety tool for electrical diagnostics. The voltage detector features an intelligent multi-colour LED system that indicates operational status and field strength. A permanently green LED confirms the device is ready for use, whilst blue, orange and red LEDs signal weak, medium and strong alternating electric fields respectively. This graduated response allows electricians to assess voltage levels without direct contact with conductors. Built to IP67 protection standards, this single-pole voltage tester is engineered for demanding trade environments with an operating temperature range of -20°C to 40°C. The compact design includes a push-on clip for secure pocket carry, whilst an integrated torch illuminates measurement points in dark locations such as consumer units and ceiling voids. The device conserves battery life through automatic switch-off after four minutes of inactivity. The internationally compatible measurement tip works with all socket variants worldwide, making this tester suitable for contractors working across different electrical standards. Compliant with EN 61010-1 and IEC 61326, this Wiha voltage detector should always be tested on a known voltage source before and after each use to verify correct operation. Features and Benefits: • Contactless voltage detection from 12V to 1000V AC for safer electrical diagnostics • Multi-colour LED system (blue, orange, red) indicates field strength for accurate assessment • IP67 protection rating ensures reliable operation in harsh trade environments • Integrated torch illuminates measurement points in poorly lit working areas • Auto power-off after four minutes conserves battery life • Compact pocket design with push-on clip for convenient portability • CAT IV 1000V rating suitable for professional electrical installations Specifications: Min. Voltage (V): 12 Max. Voltage (V): 1000 Current Type: AC Voltage V AC (min. – max.): 12-1000V Protection Class: IP 67 Operating Temperature: -20 - 40°C Power: 2 x AAA Batteries (supplied)
The Wiha Non-Contact Voltage Detector is a CAT IV rated testing device designed for electricians and contractors working with... morelive electrical systems from 12V to 1000V AC. This explosion-protected voltage tester provides contactless detection of live cables, cable breaks, blown fuses and defective bulbs through optical and audible signals, making it an essential safety tool for electrical diagnostics. The voltage detector features an intelligent multi-colour LED system that indicates operational status and field strength. A permanently green LED confirms the device is ready for use, whilst blue, orange and red LEDs signal weak, medium and strong alternating electric fields respectively. This graduated response allows electricians to assess voltage levels without direct contact with conductors. Built to IP67 protection standards, this single-pole voltage tester is engineered for demanding trade environments with an operating temperature range of -20°C to 40°C. The compact design includes a push-on clip for secure pocket carry, whilst an integrated torch illuminates measurement points in dark locations such as consumer units and ceiling voids. The device conserves battery life through automatic switch-off after four minutes of inactivity. The internationally compatible measurement tip works with all socket variants worldwide, making this tester suitable for contractors working across different electrical standards. Compliant with EN 61010-1 and IEC 61326, this Wiha voltage detector should always be tested on a known voltage source before and after each use to verify correct operation. Features and Benefits: • Contactless voltage detection from 12V to 1000V AC for safer electrical diagnostics • Multi-colour LED system (blue, orange, red) indicates field strength for accurate assessment • IP67 protection rating ensures reliable operation in harsh trade environments • Integrated torch illuminates measurement points in poorly lit working areas • Auto power-off after four minutes conserves battery life • Compact pocket design with push-on clip for convenient portability • CAT IV 1000V rating suitable for professional electrical installations Specifications: Min. Voltage (V): 12 Max. Voltage (V): 1000 Current Type: AC Voltage V AC (min. – max.): 12-1000V Protection Class: IP 67 Operating Temperature: -20 - 40°C Power: 2 x AAA Batteries (supplied)
Wiha Non-contact Voltage Detector, Explosion Protected 12-1000V AC 44309
The Wiha Voltage Detector, Explosion Protected is used to detect and locate live electrical cabling and wires, breaks and cab... morele interruptions, blown fuses, defective light bulbs on light chains and single wires.The contactless Wiha voltage tester will give an initial indication of whether an area is live or not thanks to an optical and audible signal. Once the tester is switched on, the permanently green LED indicates the tester is ready for use. During the voltage test, the LEDs will light up blue (weak), orange, or red (strong), depending on the strength of the alternating electric field.The device switches off automatically to save energy if it is not used for four minutes. An integrated flashlight allows the user to illuminate the measurement point in dark environments and can be switched off and on manually for use solely as a flashlight.With its push-on clip, the voltage tester snugly fits into any shirt or trouser pocket thanks to its handy size.Suitable for all socket variants worldwide thanks to its measurement tip suited to international usage. Designed for CAT IV 1,000 VAC, the single-pole voltage tester complies with EN 61010-1 / IEC 61326. The voltage tester should be tested on a known voltage source before and after every use to ensure it functions correctly. Specifications: Voltage V AC (min. – max.): 12-1000V.Protection Class: IP 67.Operating Temperature: -20 - 40°C.Power: 2 x AAA Batteries (supplied).
The Wiha Non-Contact Voltage Detector is a CAT IV rated testing device designed for electricians and contractors working with live electrical systems from 12V to 1000V AC. This explosion-protected voltage tester provides contactless detection of live cables, cable breaks, blown fuses and defective bulbs through optical and audible signals, making it an essential safety tool for electrical diagnostics. The voltage detector features an intelligent multi-colour LED system that indicates operational status and field strength. A permanently green LED confirms the device is ready for use, whilst blue, orange and red LEDs signal weak, medium and strong alternating electric fields respectively. This graduated response allows electricians to assess voltage levels without direct contact with conductors. Built to IP67 protection standards, this single-pole voltage tester is engineered for demanding trade environments with an operating temperature range of -20°C to 40°C. The compact design includes a push-on clip for secure pocket carry, whilst an integrated torch illuminates measurement points in dark locations such as consumer units and ceiling voids. The device conserves battery life through automatic switch-off after four minutes of inactivity. The internationally compatible measurement tip works with all socket variants worldwide, making this tester suitable for contractors working across different electrical standards. Compliant with EN 61010-1 and IEC 61326, this Wiha voltage detector should always be tested on a known voltage source before and after each use to verify correct operation. Features and Benefits: • Contactless voltage detection from 12V to 1000V AC for safer electrical diagnostics • Multi-colour LED system (blue, orange, red) indicates field strength for accurate assessment • IP67 protection rating ensures reliable operation in harsh trade environments • Integrated torch illuminates measurement points in poorly lit working areas • Auto power-off after four minutes conserves battery life • Compact pocket design with push-on clip for convenient portability • CAT IV 1000V rating suitable for professional electrical installations Specifications: Min. Voltage (V): 12 Max. Voltage (V): 1000 Current Type: AC Voltage V AC (min. – max.): 12-1000V Protection Class: IP 67 Operating Temperature: -20 - 40°C Power: 2 x AAA Batteries (supplied)
The product description is generated based on data from online stores. Before purchasing be sure to verify all information directly with the seller.
