Buy Wera Bit-Check 12 Diamond 1 Set, 12 Piece WER057421
When you make a purchase through links on our site, we may earn an affiliate commission.
Wera 12 Piece Bit-Check Diamond Screwdriver Bit and Holder Set 057421
Bits with tiny diamond particles on the bit tip. This ensures a secure fit in the screw head, reduces the contact pressure required and lowers the risk of slipping. BiTorsion bits with an elastic torsion zone - where kinetic energy is diverted from peak loads - and softer BiTorsion zone to prevent the bit tip from twisting under high strain. This g... morereatly extends the product service life. Comes with Rapidaptor technology, which allows bits to be attached without any need to actuate the sleeve. The removal of the bit is simple, just by pushing the sleeve forward - for rapid bit change with just one hand. For insertion in the power screwdriver or into the chuck of the power drill. The multi-component Bit-Check is convincing on account of its low weight and the maximum possible degree of compactness. In this respect, the soft material in the lower section of the Bit-Check ensures that the bits are securely held whilst being simple to remove at the same time. The profile and size of the bits are easy to recognise thanks to the Wera "Take it easy" Tool Finder with its colour coding and clearly visible imprint. Features and Benefits: • Upright positionable Bit-Checks convince due to their functionality in a minimum of space • BiTorsion bits for long service life • Diamond coating for a secure fit in the screw, literally bites into the screwhead to prevent cam-out • Rapidaptor holder for rapid bit change • Take it easy tool finder: colour coding according to profile and size Contents: 1x Bit-Check 12 Diamond 1, 12 pieces; 1x 889/4/1 K Rapidaptor Universal Bit Holder: 1/4"x50; 3x 851/1 BDC bits: PH 1x25, 2x PH 2x25; 3x 855/1 BDC bits: PZ 1x25, 2x PZ 2x25; 5x 867/1 BDC TORX® bits: TX 10x25, TX 15x25, TX 20x25, TX 25x25, TX 30x25
Bits with tiny diamond particles on the bit tip. This ensures a secure fit in the screw head, reduces the contact pressure required and lowers the risk of slipping. BiTorsion bits with an elastic torsion zone - where kinetic energy is diverted from peak loads - and softer BiTorsion zone to prevent the bit tip from twisting under high strain. This g... morereatly extends the product service life. Comes with Rapidaptor technology, which allows bits to be attached without any need to actuate the sleeve. The removal of the bit is simple, just by pushing the sleeve forward - for rapid bit change with just one hand. For insertion in the power screwdriver or into the chuck of the power drill. The multi-component Bit-Check is convincing on account of its low weight and the maximum possible degree of compactness. In this respect, the soft material in the lower section of the Bit-Check ensures that the bits are securely held whilst being simple to remove at the same time. The profile and size of the bits are easy to recognise thanks to the Wera "Take it easy" Tool Finder with its colour coding and clearly visible imprint. Features and Benefits: • Upright positionable Bit-Checks convince due to their functionality in a minimum of space • BiTorsion bits for long service life • Diamond coating for a secure fit in the screw, literally bites into the screwhead to prevent cam-out • Rapidaptor holder for rapid bit change • Take it easy tool finder: colour coding according to profile and size Contents: 1x Bit-Check 12 Diamond 1, 12 pieces; 1x 889/4/1 K Rapidaptor Universal Bit Holder: 1/4"x50; 3x 851/1 BDC bits: PH 1x25, 2x PH 2x25; 3x 855/1 BDC bits: PZ 1x25, 2x PZ 2x25; 5x 867/1 BDC TORX® bits: TX 10x25, TX 15x25, TX 20x25, TX 25x25, TX 30x25
Wera Bit-Check 12 Diamond 1 Set, 12 Piece WER057421
The Wera Bit-Check 12 Diamond 1, with Rapidaptor is designed for compact and organised tool storage. Utilising a unique combination of special material, hardening and precision manufacture, BiTorsion bits are designed to prevent premature wear and dramatically extend service life. The patented Torsion zone absorbs peak stress loads that normally de... morestroy bits. The holder with quick-release chuck offers press-in auto-lock and rapid one-handed bit changes for insert and power bits. The holder spin sleeve allows the steadying of the screwdriving. BiTorsion Diamond Coated (BDC) bits ensure safe working, especially driving screws into delicate materials or high-quality surfaces, preventing slipping. Additionally, where screws are driven into resistant materials such as hard woods, concrete screws and ABS plastics diamond coated bits 'bite' into the fastener ensuring a secure fit and reducing cam-out effect. This extends the life of the tool and ensures screws are fully driven home. Wera Bit-Checks feature a compact design to safely store bits and bit holders in a case that provides fast and easy tool selection. It is so slim that it can fit into your pocket. Drive and size are colour coded for easy selection of the right bit. This 12 piece set contains the following 1 x 1/4in x 50mm Rapidaptor Universal bit holder. 3 x BiTorsion 25mm BDC Phillips bits PH1, PH2 (x2). 3 x BiTorsion 25mm BDC Pozidriv bits PZ1, PZ2 (x2). 5 x BiTorsion 25mm BDC TORX bits TX10, TX15, TX20, TX25, TX30. Suitable for use with drill/drivers for impact machines use IMPAKTOR.
The Wera Bit-Check 12 Diamond 1, with Rapidaptor is designed for compact and organised tool storage. Utilising a unique combination of special material, hardening and precision manufacture, BiTorsion bits are designed to prevent premature wear and dramatically extend service life. The patented Torsion zone absorbs peak stress loads that normally de... morestroy bits. The holder with quick-release chuck offers press-in auto-lock and rapid one-handed bit changes for insert and power bits. The holder spin sleeve allows the steadying of the screwdriving. BiTorsion Diamond Coated (BDC) bits ensure safe working, especially driving screws into delicate materials or high-quality surfaces, preventing slipping. Additionally, where screws are driven into resistant materials such as hard woods, concrete screws and ABS plastics diamond coated bits 'bite' into the fastener ensuring a secure fit and reducing cam-out effect. This extends the life of the tool and ensures screws are fully driven home. Wera Bit-Checks feature a compact design to safely store bits and bit holders in a case that provides fast and easy tool selection. It is so slim that it can fit into your pocket. Drive and size are colour coded for easy selection of the right bit. This 12 piece set contains the following: 1 x 1/4in x 50mm Rapidaptor Universal bit holder. 3 x BiTorsion 25mm BDC Phillips bits: PH1, PH2 (x2). 3 x BiTorsion 25mm BDC Pozidriv bits: PZ1, PZ2 (x2). 5 x BiTorsion 25mm BDC TORX bits: TX10, TX15, TX20, TX25, TX30. Suitable for use with drill/drivers; for impact machines use IMPAKTOR.
The Wera Bit-Check 12 Diamond 1, with Rapidaptor is designed for compact and organised tool storage. Utilising a unique combination of special material, hardening and precision manufacture, BiTorsion bits are designed to prevent premature wear and dramatically extend service life. The patented Torsion zone absorbs peak stress loads that normally destroy bits. The holder with quick-release chuck offers press-in auto-lock and rapid one-handed bit changes for insert and power bits. The holder spin sleeve allows the steadying of the screwdriving. BiTorsion Diamond Coated (BDC) bits ensure safe working, especially driving screws into delicate materials or high-quality surfaces, preventing slipping. Additionally, where screws are driven into resistant materials such as hard woods, concrete screws and ABS plastics diamond coated bits 'bite' into the fastener ensuring a secure fit and reducing cam-out effect. This extends the life of the tool and ensures screws are fully driven home. Wera Bit-Checks feature a compact design to safely store bits and bit holders in a case that provides fast and easy tool selection. It is so slim that it can fit into your pocket. Drive and size are colour coded for easy selection of the right bit. This 12 piece set contains the following 1 x 1/4in x 50mm Rapidaptor Universal bit holder. 3 x BiTorsion 25mm BDC Phillips bits PH1, PH2 (x2). 3 x BiTorsion 25mm BDC Pozidriv bits PZ1, PZ2 (x2). 5 x BiTorsion 25mm BDC TORX bits TX10, TX15, TX20, TX25, TX30. Suitable for use with drill/drivers for impact machines use IMPAKTOR.
Product description is based on database from online stores. Be sure to verify all information directly with seller before purchasing.
This website uses cookies. Proceeding to use this website gives your consent for gathering and processing your data for analytic and marketing purposes.
