Buy Wera 400 i VDE Insulated 5mm Hex Plus Torque Indicator 5.0Nm 5004981001
When you make a purchase through links on our site, we may receive a affiliate commission.
Wera 5mm VDE Insulated Hex Torque Indicator, 5 Nm - 400 i Hex 5004981001
Wera VDE torque indicator with fixed torque for hexagon socket screws. Tamper proof. The robust slip clutch generates a clearly audible and tactile trigger that signals when the set torque is reached, making it impossible to apply any further torque. The Insulated, individually tested VDE T-handle torque indicator for safe working up to 1,000V T-ha... morendle is ideal for transferring controlled tightening torque and high loosening torque Error-free screwdriving due to non-slip friction clutch and exact torque transmission Distinctly audible and noticeable excess-load signal when the pre-set torque is reached Tamper-proof against accidental changing of set torque value
Wera 400 i VDE Insulated 5mm Hex Plus Torque Indicator Screwdriver 5004981001
The Wera 400 i VDE Insulated 5mm Hex Plus Torque Indicator Screwdriver is a fixed-torque VDE screwdriver designed for safe, accurate tightening of hexagon socket screws in live electrical environments up to 1,000V AC. Individually tested to IEC 60900 at 10,000V, this tool is an essential piece of kit for electricians and electrical contractors work... moreing on live or potentially live installations. The tamper-proof design ensures the pre-set torque value cannot be accidentally altered, giving you full confidence that connections are tightened to the correct specification every time. The robust slip clutch delivers a clearly audible and tactile signal the moment the set torque is reached, immediately preventing over-tightening. This makes it ideal for critical electrical connections where precise torque control is non-negotiable. Importantly, the loosening torque is set significantly higher than the tightening torque, so no additional tools are required to undo connections. The T-handle design fills the hand naturally, with softly rounded recessed grips that allow comfortable, controlled operation during extended use. This ergonomic form ensures optimal power transfer whether tightening or loosening. Features and Benefits: • VDE insulated and individually tested to IEC 60900 — safe for use up to 1,000V AC • Fixed torque setting is tamper-proof against accidental adjustment • Audible and tactile clutch signal prevents over-tightening • Higher loosening torque means no additional tools needed for removal • Ergonomic T-handle with recessed grips for comfortable, controlled use • Suitable for hexagon socket screws requiring precise torque control Contents: 400 i VDE Hex Insulated torque-indicator, 5 mm x 5.0 Nm Specifications: Tip Size: 5mm Torque Setting: 5.0 Nm Insulation Rating: 1,000V AC Test Voltage: 10,000V Standard: IEC 60900
Wera 400 i VDE Insulated 5mm Hex Plus Torque Indicator Screwdriver 5.0Nm 5004981001
The Wera 400 i VDE Insulated 5mm Hex Plus Torque Indicator Screwdriver is a fixed-torque VDE screwdriver designed for safe, accurate tightening of hexagon socket screws in live electrical environments up to 1,000V AC. Individually tested to IEC 60900 at 10,000V, this tool is an essential piece of kit for electricians and electrical contractors work... moreing on live or potentially live installations. The tamper-proof design ensures the pre-set torque value cannot be accidentally altered, giving you full confidence that connections are tightened to the correct specification every time. The robust slip clutch delivers a clearly audible and tactile signal the moment the set torque is reached, immediately preventing over-tightening. This makes it ideal for critical electrical connections where precise torque control is non-negotiable. Importantly, the loosening torque is set significantly higher than the tightening torque, so no additional tools are required to undo connections. The T-handle design fills the hand naturally, with softly rounded recessed grips that allow comfortable, controlled operation during extended use. This ergonomic form ensures optimal power transfer whether tightening or loosening. Features and Benefits: • VDE insulated and individually tested to IEC 60900 — safe for use up to 1,000V AC • Fixed torque setting is tamper-proof against accidental adjustment • Audible and tactile clutch signal prevents over-tightening • Higher loosening torque means no additional tools needed for removal • Ergonomic T-handle with recessed grips for comfortable, controlled use • Suitable for hexagon socket screws requiring precise torque control Contents: 400 i VDE Hex Insulated torque-indicator, 5 mm x 5.0 Nm Specifications: Tip Size: 5mm Torque Setting: 5.0 Nm Insulation Rating: 1,000V AC Test Voltage: 10,000V Standard: IEC 60900
The Wera 400 i VDE Insulated 5mm Hex Plus Torque Indicator Screwdriver is a fixed-torque VDE screwdriver designed for safe, accurate tightening of hexagon socket screws in live electrical environments up to 1,000V AC. Individually tested to IEC 60900 at 10,000V, this tool is an essential piece of kit for electricians and electrical contractors work... moreing on live or potentially live installations. The tamper-proof design ensures the pre-set torque value cannot be accidentally altered, giving you full confidence that connections are tightened to the correct specification every time. The robust slip clutch delivers a clearly audible and tactile signal the moment the set torque is reached, immediately preventing over-tightening. This makes it ideal for critical electrical connections where precise torque control is non-negotiable. Importantly, the loosening torque is set significantly higher than the tightening torque, so no additional tools are required to undo connections. The T-handle design fills the hand naturally, with softly rounded recessed grips that allow comfortable, controlled operation during extended use. This ergonomic form ensures optimal power transfer whether tightening or loosening. Features and Benefits: • VDE insulated and individually tested to IEC 60900 — safe for use up to 1,000V AC • Fixed torque setting is tamper-proof against accidental adjustment • Audible and tactile clutch signal prevents over-tightening • Higher loosening torque means no additional tools needed for removal • Ergonomic T-handle with recessed grips for comfortable, controlled use • Suitable for hexagon socket screws requiring precise torque control Contents: 400 i VDE Hex Insulated torque-indicator, 5 mm x 5.0 Nm Specifications: Tip Size: 5mm Torque Setting: 5.0 Nm Insulation Rating: 1,000V AC Test Voltage: 10,000V Standard: IEC 60900
The Wera 400 i VDE Insulated 5mm Hex Plus Torque Indicator Screwdriver is a fixed-torque VDE screwdriver designed for safe, accurate tightening of hexagon socket screws in live electrical environments up to 1,000V AC. Individually tested to IEC 60900 at 10,000V, this tool is an essential piece of kit for electricians and electrical contractors working on live or potentially live installations. The tamper-proof design ensures the pre-set torque value cannot be accidentally altered, giving you full confidence that connections are tightened to the correct specification every time. The robust slip clutch delivers a clearly audible and tactile signal the moment the set torque is reached, immediately preventing over-tightening. This makes it ideal for critical electrical connections where precise torque control is non-negotiable. Importantly, the loosening torque is set significantly higher than the tightening torque, so no additional tools are required to undo connections. The T-handle design fills the hand naturally, with softly rounded recessed grips that allow comfortable, controlled operation during extended use. This ergonomic form ensures optimal power transfer whether tightening or loosening. Features and Benefits: • VDE insulated and individually tested to IEC 60900 — safe for use up to 1,000V AC • Fixed torque setting is tamper-proof against accidental adjustment • Audible and tactile clutch signal prevents over-tightening • Higher loosening torque means no additional tools needed for removal • Ergonomic T-handle with recessed grips for comfortable, controlled use • Suitable for hexagon socket screws requiring precise torque control Contents: 400 i VDE Hex Insulated torque-indicator, 5 mm x 5.0 Nm Specifications: Tip Size: 5mm Torque Setting: 5.0 Nm Insulation Rating: 1,000V AC Test Voltage: 10,000V Standard: IEC 60900
The product description is generated based on data from online stores. Before purchasing be sure to verify all information directly with the seller.
