Dark mode
only bits & sockets setsin all categories
only bits & sockets sets
United Kingdom

Wera Kraftform Kompakt Stubby Screwdriver and 18 Piece Bit Set 5057471001

Photos - Bits / Sockets Wera Kraftform Kompakt Stubby Screwdriver and 18 Piece Bit Set 5057471001
from £56.00 up to £102.00 
Wera Kraftform Kompakt Stubby Screwdriver and 18 Piece Bit Set 5057471001
from £56.00 up to £102.00 

Buy Wera Kraftform Kompakt Stubby Screwdriver and 18 Piece Bit Set 5057471001

When you make a purchase through links on our site, we may receive a affiliate commission.

Wera Kraftform Kompakt Stubby Screwdriver and 18 Piece Bit Set 5057471001

Handle/interchangeable blade system for lightning fast replacement of the required blade. Especially small bit-holding Stubby screwdriver handle with short blade for hard to reach areas. Suitable for the mounting of bits with ¼" hexagon drive as per DIN ISO 1173-C 6.3 and Wera connection series 1. With strong permanent magnet, which also holds larg... moree and heavy screws. The 2-component Kraftform handle with its practical combination of hard and soft zones allows for a firm grip and precise working. High-quality BiTorsion bits with a softer BiTorsion zone to prevent twisting of the bit tip under high loads. This significantly increases product life. Compact, textile box with high robustness, low weight and volume. Suitable for docking with the Wera 2go system. Features and Benefits • Handle/Interchangeable blade system for rapid exchange of the blade • Stubby bit hand holder: short compact shape for working in confined spaces • Ergonomic 2-component Kraftform handle for precise work • Bits with BiTorsion zone to cushion load peaks • Take it easy tool finder: colour coding according to profile and size Contents 1x Kraftform Kompakt Stubby 1, 19 pieces; 1x 811/1 Stubby Bitholding screwdriver, magnetic: 1/4"; 2x 851/1 BTZ bits: PH 1x25, PH 2x25; 2x 855/1 BTZ bits: PZ 1x25, PZ 2x25; 5x 867/1 BTZ TORX® bits: TX 10x25, TX 15x25, TX 20x25, TX 25x25, TX 30x25; 6x 840/1 BTZ bits: 2.0x25, 2.5x25, 3.0x25, 4.0x25, 5.0x25, 5.5x25; 3x 800/1 BTZ bits: 0.8x5.5x25, 1.0x5.5x25, 1.2x6.5x25; 1x Hook and Loop Fastener Strip 70: 70.0x50.0
Mytoolshed.co.uk
Delivery: in United Kingdom
Report
£55.95
Buy in shop

Wera Kraftform Kompakt Stubby Screwdriver and 18 Piece Bit Set 5057471001

Handle/interchangeable blade system for lightning fast replacement of the required blade. Especially small bit-holding Stubby screwdriver handle with short blade for hard to reach areas. Suitable for the mounting of bits with ¼" hexagon drive as per DIN ISO 1173-C 6.3 and Wera connection series 1. With strong permanent magnet, which also holds larg... moree and heavy screws. The 2-component Kraftform handle with its practical combination of hard and soft zones allows for a firm grip and precise working. High-quality BiTorsion bits with a softer BiTorsion zone to prevent twisting of the bit tip under high loads. This significantly increases product life. Compact, textile box with high robustness, low weight and volume. Suitable for docking with the Wera 2go system. Features and Benefits • Handle/Interchangeable blade system for rapid exchange of the blade • Stubby bit hand holder: short compact shape for working in confined spaces • Ergonomic 2-component Kraftform handle for precise work • Bits with BiTorsion zone to cushion load peaks • Take it easy tool finder: colour coding according to profile and size Contents 1x Kraftform Kompakt Stubby 1, 19 pieces; 1x 811/1 Stubby Bitholding screwdriver, magnetic: 1/4"; 2x 851/1 BTZ bits: PH 1x25, PH 2x25; 2x 855/1 BTZ bits: PZ 1x25, PZ 2x25; 5x 867/1 BTZ TORX® bits: TX 10x25, TX 15x25, TX 20x25, TX 25x25, TX 30x25; 6x 840/1 BTZ bits: 2.0x25, 2.5x25, 3.0x25, 4.0x25, 5.0x25, 5.5x25; 3x 800/1 BTZ bits: 0.8x5.5x25, 1.0x5.5x25, 1.2x6.5x25; 1x Hook and Loop Fastener Strip 70: 70.0x50.0
Tooled-up.com
Delivery: to United Kingdom
Report
£55.95
Buy in shop

WERA stubby type interchangeable driver 057471

― ― ― ― ― ― ― ― ― ― ― ― ― JOOM Approved Store! Japanese sellers cross borders and deliver high quality! Shipped from Japan! We will pack it tightly and deliver it quickly and carefully! With a strict inspection system in accordance with Japanese quality standards, we select and deliver only excellent products! The product may come with a Japane... morese manual. It is recommended to use a character recognition application to translate the text! I hope you can help us make the store even better by following up & reviewing! ― ― ― ― ― ― ― ― ― ― ― ― ― ⚠️【Be sure to check if the products you saw before purchasing fall under the following categories! 】 ✅【Voltage Compatibility】 Electrical appliances are designed to meet Japanese voltage specifications (90-110V), so changing the voltage can cause malfunction. ✅【Plug type 】 Our products use Japanese plug type (Type A or Type B). Use the conversion adapter as needed. ✅【Transformers & Adapters are important] 】 The transformer adjusts the voltage to the customer's device requirements. The conversion adapter only changes the shape of the plug and does not adjust the voltage. Using only the conversion adapter without a transformer can damage the product. ✅【Responsibility】 We are not responsible for any malfunction or damage caused by improper use, such as operating a product without a transformer. ― ― ― ― ― ― ― ― ― ― ― ― ― Number of sets: 19 points, total bit length (mm): 25 each Handle/blade changing system allows you to quickly change out the blade you need. The stubby driver handle holds particularly small bits and has a short blade for working in hard-to-reach areas. Suitable for mounting bits with 1/4 hex drive according to DIN ISO 1173-C 6.3 and Wera connection series 1. Uses strong permanent magnets to secure even heavy and large screws.
Joom UK
Delivery: to United Kingdom
Report
£101.52
Buy in shop
Handle/interchangeable blade system for lightning fast replacement of the required blade. Especially small bit-holding Stubby screwdriver handle with short blade for hard to reach areas. Suitable for the mounting of bits with ¼" hexagon drive as per DIN ISO 1173-C 6.3 and Wera connection series 1. With strong permanent magnet, which also holds large and heavy screws. The 2-component Kraftform handle with its practical combination of hard and soft zones allows for a firm grip and precise working. High-quality BiTorsion bits with a softer BiTorsion zone to prevent twisting of the bit tip under high loads. This significantly increases product life. Compact, textile box with high robustness, low weight and volume. Suitable for docking with the Wera 2go system. Features and Benefits • Handle/Interchangeable blade system for rapid exchange of the blade • Stubby bit hand holder: short compact shape for working in confined spaces • Ergonomic 2-component Kraftform handle for precise work • Bits with BiTorsion zone to cushion load peaks • Take it easy tool finder: colour coding according to profile and size Contents 1x Kraftform Kompakt Stubby 1, 19 pieces; 1x 811/1 Stubby Bitholding screwdriver, magnetic: 1/4"; 2x 851/1 BTZ bits: PH 1x25, PH 2x25; 2x 855/1 BTZ bits: PZ 1x25, PZ 2x25; 5x 867/1 BTZ TORX® bits: TX 10x25, TX 15x25, TX 20x25, TX 25x25, TX 30x25; 6x 840/1 BTZ bits: 2.0x25, 2.5x25, 3.0x25, 4.0x25, 5.0x25, 5.5x25; 3x 800/1 BTZ bits: 0.8x5.5x25, 1.0x5.5x25, 1.2x6.5x25; 1x Hook and Loop Fastener Strip 70: 70.0x50.0
The product description is generated based on data from online stores. Before purchasing be sure to verify all information directly with the seller.

Screwdrivers and drills for dummiesQuestions about drills and screwdrivers that beginners are embarrassed to ask more experienced craftsmen
What is the best screwdriver?Among thousands of screwdrivers, you can find one that surpasses the rest in all respects. Or is it impossible?
How to place an order?How to add store?
Remember that the online store is responsible for the accuracy of information regarding price, warranty, and delivery!
We recommendCompare using chart →
Bahco 66IM/11C-1
from £11.95 
bits 10 pcs, PH, PZ, T, length 50 mm, drums / torsion, in box: bit holder
Stanley 0-54-925
from £14.12 
bits 15 pcs, SL, PH, T, H, length 25 mm, socket heads 12 pcs, 6-points, in box: adapter
Bahco S160
from £27.98 
socket heads 12 pcs, 6-points, in box: ratchet wrench, tap wrench, extension, case
Wera WE-059295
from £50.39 
bits 16 pcs, SL, PH, PZ, TH, H, length 89 mm
Wera WE-004018
from £85.99 
bits 15 pcs, PH, PZ, T, H, length 25 mm, socket heads 9 pcs, 6-points, in box: adapter, ratchet wrench, extension
Bosch 2608522350
from £13.09 
bits 2 pcs, PH, PZ, length 50 mm, socket heads 3 pcs, 6-points, drums / torsion
Draper Expert 63532
from £39.95 
socket heads 25 pcs, 6-points, in box: ratchet wrench, tap wrench, extension, universal joint
Wera WE-003645
from £339.99 
bits 13 pcs, PH, PZ, T, H, length 30, 35 mm, socket heads 17 pcs, 6-points, in box: adapter, ratchet wrench, tap wrench, extension, universal joint, case
Stanley 1-13-902
from £31.37 
bits 60 pcs, SL, PH, PZ, T, TH, H, length 25 mm, in box: bit holder, case
Stanley FatMax FMHT0-62691
from £10.99 
bits 12 pcs, SL, PH, PZ, T, length 25 mm, in box: bit holder
Wera WE-003594
from £249.95 
bits 18 pcs, SL, PH, PZ, TH, H, length 25 mm, socket heads 18 pcs, 6-points, in box: adapter, ratchet wrench, tap wrench, extension, universal joint, case
DeWALT DT70512T
from £11.89 
bits 12 pcs, SL, PH, PZ, T, length 25 mm, drums / torsion, in box: bit holder
Filters
Models
Popular models