Buy Wera Kraftform Kompakt 23 Piece VDE Insulated Safe Torque Speed Control Cabinet Screwdriver Set 5006633001
When you make a purchase through links on our site, we may receive a affiliate commission.
Wera Kraftform Kompakt 23 Piece VDE Insulated Safe Torque Speed Control Cabinet Screwdriver Set 5006633001
The Wera Kraftform Kompakt 23 Piece VDE Insulated Safe-Torque Speed Control Cabinet Screwdriver Set is a precision VDE-rated screwdriver system designed for electricians and panel engineers working on control cabinet installations where accurate torque control is essential. At the heart of this set are two Safe-Torque Speed torque wrenches — the 75... more08 VDE (0.4–2.0 Nm) and the 7516 VDE (2.4–4.0 Nm) — each offering five selectable maximum tightening torques displayed via a digital readout. A reliable slip-over mechanism prevents overtightening when the pre-set torque is reached, and the Torque Lock function allows the handle to be used for high-effort loosening and tightening without engaging the torque-limiting mechanism. All tools in the set are individually tested to IEC 60900, providing the assurance required when working on live or potentially live electrical equipment. The 817 VDE blade-holding handle gives additional versatility for tasks where torque control is not required. The 20 included VDE blades — each 157 mm in length — cover a comprehensive range of drive types including Phillips, Pozidrive, slotted, TORX®, and hex profiles. Colour coding by drive type and laser-engraved size markings make blade identification fast and accurate. Many blades feature a reduced-diameter shank to access recessed screws and spring-clip terminals in tight control cabinet environments. The full set is stored in a robust textile carry case for organised transport between sites. Features and Benefits: • Individually tested to IEC 60900 — suitable for use on electrical equipment up to 1000V AC / 1500V DC • 7508 VDE torque wrench with five pre-set torque values: 0.4, 0.8, 1.2, 1.6, and 2.0 Nm • 7516 VDE torque wrench with five pre-set torque values: 2.4, 2.8, 3.2, 3.6, and 4.0 Nm • Digital torque value display for fast, accurate torque selection • Slip-over mechanism prevents overtightening — works in both clockwise and counterclockwise directions • Torque Lock function enables high tightening and loosening moments without torque limitation • 817 VDE blade-holding handle compatible with all Kraftform Kompakt VDE interchangeable blades • 20 VDE blades with colour-coded profiles and laser-engraved size markings for quick identification • Reduced blade diameters on selected blades for access to recessed screws and spring terminals • Anti-roll protection and spinning zone on all blades for controlled, efficient operation • Stored in a robust textile case for neat organisation and convenient site transport Contents: 1x 7508 VDE Kraftform Safe-Torque Speed torque screwdriver, 0.4–2.0 Nm, 192 mm 1x 7516 VDE Kraftform Safe-Torque Speed torque screwdriver, 2.4–4.0 Nm, 192 mm 1x 817 VDE Kraftform blade-holding handle, 98 mm 2x Kraftform Kompakt VDE 62 iS Take it easy: PH 1x157 mm, PH 2x157 mm 2x Kraftform Kompakt VDE 65 iS Take it easy: PZ 1x157 mm, PZ 2x157 mm 2x Kraftform Kompakt VDE 62 iS PH/S
The Wera Kraftform Kompakt 23 Piece VDE Insulated Safe-Torque Speed Control Cabinet Screwdriver Set is a precision VDE-rated screwdriver system designed for electricians and panel engineers working on control cabinet installations where accurate torque control is essential. At the heart of this set are two Safe-Torque Speed torque wrenches — the 75... more08 VDE (0.4–2.0 Nm) and the 7516 VDE (2.4–4.0 Nm) — each offering five selectable maximum tightening torques displayed via a digital readout. A reliable slip-over mechanism prevents overtightening when the pre-set torque is reached, and the Torque Lock function allows the handle to be used for high-effort loosening and tightening without engaging the torque-limiting mechanism. All tools in the set are individually tested to IEC 60900, providing the assurance required when working on live or potentially live electrical equipment. The 817 VDE blade-holding handle gives additional versatility for tasks where torque control is not required. The 20 included VDE blades — each 157 mm in length — cover a comprehensive range of drive types including Phillips, Pozidrive, slotted, TORX®, and hex profiles. Colour coding by drive type and laser-engraved size markings make blade identification fast and accurate. Many blades feature a reduced-diameter shank to access recessed screws and spring-clip terminals in tight control cabinet environments. The full set is stored in a robust textile carry case for organised transport between sites. Features and Benefits: • Individually tested to IEC 60900 — suitable for use on electrical equipment up to 1000V AC / 1500V DC • 7508 VDE torque wrench with five pre-set torque values: 0.4, 0.8, 1.2, 1.6, and 2.0 Nm • 7516 VDE torque wrench with five pre-set torque values: 2.4, 2.8, 3.2, 3.6, and 4.0 Nm • Digital torque value display for fast, accurate torque selection • Slip-over mechanism prevents overtightening — works in both clockwise and counterclockwise directions • Torque Lock function enables high tightening and loosening moments without torque limitation • 817 VDE blade-holding handle compatible with all Kraftform Kompakt VDE interchangeable blades • 20 VDE blades with colour-coded profiles and laser-engraved size markings for quick identification • Reduced blade diameters on selected blades for access to recessed screws and spring terminals • Anti-roll protection and spinning zone on all blades for controlled, efficient operation • Stored in a robust textile case for neat organisation and convenient site transport Contents: 1x 7508 VDE Kraftform Safe-Torque Speed torque screwdriver, 0.4–2.0 Nm, 192 mm 1x 7516 VDE Kraftform Safe-Torque Speed torque screwdriver, 2.4–4.0 Nm, 192 mm 1x 817 VDE Kraftform blade-holding handle, 98 mm 2x Kraftform Kompakt VDE 62 iS Take it easy: PH 1x157 mm, PH 2x157 mm 2x Kraftform Kompakt VDE 65 iS Take it easy: PZ 1x157 mm, PZ 2x157 mm 2x Kraftform Kompakt VDE 62 iS PH/S
The Wera Kraftform Kompakt 23 Piece VDE Insulated Safe-Torque Speed Control Cabinet Screwdriver Set is a precision VDE-rated screwdriver system designed for electricians and panel engineers working on control cabinet installations where accurate torque control is essential. At the heart of this set are two Safe-Torque Speed torque wrenches — the 7508 VDE (0.4–2.0 Nm) and the 7516 VDE (2.4–4.0 Nm) — each offering five selectable maximum tightening torques displayed via a digital readout. A reliable slip-over mechanism prevents overtightening when the pre-set torque is reached, and the Torque Lock function allows the handle to be used for high-effort loosening and tightening without engaging the torque-limiting mechanism. All tools in the set are individually tested to IEC 60900, providing the assurance required when working on live or potentially live electrical equipment. The 817 VDE blade-holding handle gives additional versatility for tasks where torque control is not required. The 20 included VDE blades — each 157 mm in length — cover a comprehensive range of drive types including Phillips, Pozidrive, slotted, TORX®, and hex profiles. Colour coding by drive type and laser-engraved size markings make blade identification fast and accurate. Many blades feature a reduced-diameter shank to access recessed screws and spring-clip terminals in tight control cabinet environments. The full set is stored in a robust textile carry case for organised transport between sites. Features and Benefits: • Individually tested to IEC 60900 — suitable for use on electrical equipment up to 1000V AC / 1500V DC • 7508 VDE torque wrench with five pre-set torque values: 0.4, 0.8, 1.2, 1.6, and 2.0 Nm • 7516 VDE torque wrench with five pre-set torque values: 2.4, 2.8, 3.2, 3.6, and 4.0 Nm • Digital torque value display for fast, accurate torque selection • Slip-over mechanism prevents overtightening — works in both clockwise and counterclockwise directions • Torque Lock function enables high tightening and loosening moments without torque limitation • 817 VDE blade-holding handle compatible with all Kraftform Kompakt VDE interchangeable blades • 20 VDE blades with colour-coded profiles and laser-engraved size markings for quick identification • Reduced blade diameters on selected blades for access to recessed screws and spring terminals • Anti-roll protection and spinning zone on all blades for controlled, efficient operation • Stored in a robust textile case for neat organisation and convenient site transport Contents: 1x 7508 VDE Kraftform Safe-Torque Speed torque screwdriver, 0.4–2.0 Nm, 192 mm 1x 7516 VDE Kraftform Safe-Torque Speed torque screwdriver, 2.4–4.0 Nm, 192 mm 1x 817 VDE Kraftform blade-holding handle, 98 mm 2x Kraftform Kompakt VDE 62 iS Take it easy: PH 1x157 mm, PH 2x157 mm 2x Kraftform Kompakt VDE 65 iS Take it easy: PZ 1x157 mm, PZ 2x157 mm 2x Kraftform Kompakt VDE 62 iS PH/S
The product description is generated based on data from online stores. Before purchasing be sure to verify all information directly with the seller.
