United Kingdom
Catalog   /   Home & Renovation   /   Repair   /   Nails, Screws, Fasteners   /   Fischer

Fischer Group Ultracut Fbs Ii 12x70 10/-/- Us 20 Units Silver 536869

Photos - Nail / Screw / Fastener Fischer Group Ultracut Fbs Ii 12x70 10/-/- Us 20 Units Silver 536869
£25.00 
Buy!
BricoINN

Fischer Group Ultracut Fbs Ii 12x70 10/-/- Us 20 Units Silver 536869

BricoINN
Delivery: in United Kingdom
Report
Fischer Group Ultracut Fbs Ii 12x70 10/-/- Us 20 Units Silver 536869
£25.00 

Buy Fischer Group Ultracut Fbs Ii 12x70 10/-/- Us 20 Units Silver 536869

When you make a purchase through links on our site, we may earn an affiliate commission.

Fischer Group Ultracut Fbs Ii 12x70 10/-/- Us 20 Units Silver 536869

The fischer ULTRACUT FBS II is the perfect concrete screw for top installation comfort. The special saw tooth geometry enables fast cutting into the concrete. Drill hole cleaning is not required for installations in ceilings or floors. Thanks to the national approval, multiple usage for temporary anchorings (for example, formwork construction) is p... moreermitted. For the installation of the wall screw, we recommend a tangential impact driver with a compatible socket or a special TX bit. The concrete screw is ideal for the fixation of railings, protection barriers, cantilevers, and formwork bracings, for example.Advantages:- With up to 3 embedment depths, the ULTRACUT FBS II US allows for the same screw to be used for different component thicknesses.- The special saw tooth geometry enables fast cutting into the concrete.- Drill holes do not need to be cleaned during vertical installation (ceiling and floor). For floor fixings the hole must be drilled 3x drill hole diameter deeper.- Expansion-free anchoring (undercut) allows for lowest edge- and axial spacings.- The ETA approval covers applications in cracked concrete and seismic power categories C1 and C2.- The approved adjustment for the concrete screws allows the screw to be unscrewed twice to place maximum 10 mm packing below the base plate head or to align the attached part, and then to tighten the screw again.- The checking gauge allows for reuse in temporary fixings (e.g. inclined supports) covered by the national approval.Features:- With up to 3 embedment depths, it allows for the same screw to be used for different component thicknesses.- The special saw tooth geometry enables fast cutting into the concrete.- The approved adjustment for the concrete screws allows the screw to be unscrewed twice to align the attached part, and then to tighten the screw again.Specifications:- ETA-approval: Yes- Drill diameter: 12[mm]- Screw: 4 x 70[mm]- Screw-in depth with fixture thickness: 60 / 10[mm]- Screw-in depth with fixture thickness: -[mm]- Drive: SW17 - Packaging: Folding box - Amount: 20[Unit(s)]
BricoINN
Delivery: in United Kingdom
Report
£24.99
The fischer ULTRACUT FBS II is the perfect concrete screw for top installation comfort. The special saw tooth geometry enables fast cutting into the concrete. Drill hole cleaning is not required for installations in ceilings or floors. Thanks to the national approval, multiple usage for temporary anchorings (for example, formwork construction) is permitted. For the installation of the wall screw, we recommend a tangential impact driver with a compatible socket or a special TX bit. The concrete screw is ideal for the fixation of railings, protection barriers, cantilevers, and formwork bracings, for example.Advantages:- With up to 3 embedment depths, the ULTRACUT FBS II US allows for the same screw to be used for different component thicknesses.- The special saw tooth geometry enables fast cutting into the concrete.- Drill holes do not need to be cleaned during vertical installation (ceiling and floor). For floor fixings the hole must be drilled 3x drill hole diameter deeper.- Expansion-free anchoring (undercut) allows for lowest edge- and axial spacings.- The ETA approval covers applications in cracked concrete and seismic power categories C1 and C2.- The approved adjustment for the concrete screws allows the screw to be unscrewed twice to place maximum 10 mm packing below the base plate head or to align the attached part, and then to tighten the screw again.- The checking gauge allows for reuse in temporary fixings (e.g. inclined supports) covered by the national approval.Features:- With up to 3 embedment depths, it allows for the same screw to be used for different component thicknesses.- The special saw tooth geometry enables fast cutting into the concrete.- The approved adjustment for the concrete screws allows the screw to be unscrewed twice to align the attached part, and then to tighten the screw again.Specifications:- ETA-approval: Yes- Drill diameter: 12[mm]- Screw: 4 x 70[mm]- Screw-in depth with fixture thickness: 60 / 10[mm]- Screw-in depth with fixture thickness: -[mm]- Drive: SW17 - Packaging: Folding box - Amount: 20[Unit(s)]
Product description is based on database from online stores. Be sure to verify all information directly with seller before purchasing.

How to place an order?How to add store?
Remember that online store is responsible for accuracy of information about price, warranty and delivery!