When you make a purchase through links on our site, we may receive a affiliate commission.
Dremel Max 13 Mm 408d Multitools Sanding Band 26150408DM
Sanding hard & soft woods, composites, fiberglass, Masonite boards, rigid foam, and more. Drilling soft wood and ceramic wall tile. Mounted on an extra strong, steel mandrel the sanding drum allows you to move laterally or orbitally to smooth out surfaces, enlarge holes, or create irregular cavities. Drum is most effective when the edge is flat aga... moreinst the work piece. To find optimal speed, start slowly and gradually increase speed in order to avoid excessive heat. Let the tool do the work with reduced speed and apply little to no pressure in order to maximize accessory life. Not recommended for usage with metal or substances such as paint & other finishes as drum will be clogged easily. This accessory functions as both a sanding drum and a hole drill. With hole drill function you can plunge cut into a variety of materials. Start drilling by holding your tool on a 45 degree angle. Continue cutting, moving the tool in circular motion. Allow the tool to cut the whole gradually. This way you will build minimum heat around the accessory and maximize the accessory life. When drilling holes through ceramic wall tile, start hole on the non-glazed side of the tile. To remove a material plug stuck in the hole saw, fasten a screw into the plug and pull it out or lightly tap the plug with a punch until it breaks.Features:- 30 times longer life compared to standard Dremel sanding band (408).- Carbide coating provides added durability to the surface of the drum and will not tear loose like other ordinary sanding bands.- Functions as both a sanding drum and a hole drill capable of plunge cutting into a variety of materials.- Mounted on an extra strong steel mandrel.Specifications:- Shank diameter: 3,2 mm- Working diameter: 13,0 mm- Working height: 13,0 mm- Working length: 13,0 mm- Grit: 60- Maximum RPM: 35.000 1/minMaterials to use on: - Ideal for soft woods and ceramic wall tile.- Not recommended for stone, porcelain, or hard floor tiles.Hole drill - Recommended speed:- Soft & Hard Wood 20000 RPM- Laminates/Plastics 15000 RPM- Ceramic 15000 – 20000 RPMTechnical details for Sanding band and hole drill DREMEL® MAX:- Plywood- Softwood- Chipboard- Hardwood- Soft Metal- Brass- Hardened Steel- Gold- Aluminium- Silver- Stainless Steel- Copper- Rubber- Plastic- Plexiglass
Mounted on an extra strong, steel mandrel, this Dremel Max carbide coated sanding drum allows you to move laterally or orbitally to smooth out surfaces, enlarge holes, or create irregular cavities. The carbide coating provides added durability to the surface of the drum and will not tear loose like other ordinary sanding bands. This means the acces... moresory can last up to 30 times longer than the Dremel 408 sanding drum. Additionally, the carbide grit enables it to be used like a hole saw for plunge cutting into materials like wood, plastics, laminates and ceramics. The drum is most effective when the edge is flat against the work piece. To find the optimal speed, start slowly and gradually increase speed in order to avoid excessive heat. Let the tool do the work with reduced speed and apply little to no pressure in order to maximize accessory life. Not recommended for usage with metal or substances such as paint & other finishes as the drum will be clogged easily. Ideal for materials including hard and soft woods, ceramic wall tiles, composites, plastics, fibreglass and stone. Not recommonded for use on metal. Features & Benefits • Carbide sanding drum and hole saw for rotary multi tools • Carbide coating provides added durability to the surface of the drum • Longer life compared to standard Dremel (408) sanding band • Mounted on an extra strong steel mandrel Specifications • Shank Diameter: 3.2mm • Working Diameter: 13.0mm • Working Length: 13.0mm • Grit: 60G Contents • Pack of 1
Dremel Max Carbide Sanding Drum 13mm 60g Pack of 1 408DM
Mounted on an extra strong, steel mandrel, this Dremel Max carbide coated sanding drum allows you to move laterally or orbitally to smooth out surfaces, enlarge holes, or create irregular cavities. The carbide coating provides added durability to the surface of the drum and will not tear loose like other ordinary sanding bands. This means the acces... moresory can last up to 30 times longer than the Dremel 408 sanding drum. Additionally, the carbide grit enables it to be used like a hole saw for plunge cutting into materials like wood, plastics, laminates and ceramics. The drum is most effective when the edge is flat against the work piece. To find the optimal speed, start slowly and gradually increase speed in order to avoid excessive heat. Let the tool do the work with reduced speed and apply little to no pressure in order to maximize accessory life. Not recommended for usage with metal or substances such as paint & other finishes as the drum will be clogged easily. Ideal for materials including hard and soft woods, ceramic wall tiles, composites, plastics, fibreglass and stone. Not recommonded for use on metal. Features & Benefits • Carbide sanding drum and hole saw for rotary multi tools • Carbide coating provides added durability to the surface of the drum • Longer life compared to standard Dremel (408) sanding band • Mounted on an extra strong steel mandrel Specifications • Shank Diameter: 3.2mm • Working Diameter: 13.0mm • Working Length: 13.0mm • Grit: 60G Contents • Pack of 1
Mounted on an extra strong, steel mandrel, this Dremel Max carbide coated sanding drum allows you to move laterally or orbitally to smooth out surfaces, enlarge holes, or create irregular cavities. The carbide coating provides added durability to the surface of the drum and will not tear loose like other ordinary sanding bands. This means the acces... moresory can last up to 30 times longer than the Dremel 408 sanding drum. Additionally, the carbide grit enables it to be used like a hole saw for plunge cutting into materials like wood, plastics, laminates and ceramics. The drum is most effective when the edge is flat against the work piece. To find the optimal speed, start slowly and gradually increase speed in order to avoid excessive heat. Let the tool do the work with reduced speed and apply little to no pressure in order to maximize accessory life. Not recommended for usage with metal or substances such as paint & other finishes as the drum will be clogged easily. Ideal for materials including hard and soft woods, ceramic wall tiles, composites, plastics, fibreglass and stone. Not recommonded for use on metal. Features & Benefits • Carbide sanding drum and hole saw for rotary multi tools • Carbide coating provides added durability to the surface of the drum • Longer life compared to standard Dremel (408) sanding band • Mounted on an extra strong steel mandrel Specifications • Shank Diameter: 3.2mm • Working Diameter: 13.0mm • Working Length: 13.0mm • Grit: 60G Contents • Pack of 1
Mounted on an extra strong, steel mandrel, this Dremel Max carbide coated sanding drum allows you to move laterally or orbitally to smooth out surfaces, enlarge holes, or create irregular cavities. The carbide coating provides added durability to the surface of the drum and will not tear loose like other ordinary sanding bands. This means the accessory can last up to 30 times longer than the Dremel 408 sanding drum. Additionally, the carbide grit enables it to be used like a hole saw for plunge cutting into materials like wood, plastics, laminates and ceramics. The drum is most effective when the edge is flat against the work piece. To find the optimal speed, start slowly and gradually increase speed in order to avoid excessive heat. Let the tool do the work with reduced speed and apply little to no pressure in order to maximize accessory life. Not recommended for usage with metal or substances such as paint & other finishes as the drum will be clogged easily. Ideal for materials including hard and soft woods, ceramic wall tiles, composites, plastics, fibreglass and stone. Not recommonded for use on metal. Features & Benefits • Carbide sanding drum and hole saw for rotary multi tools • Carbide coating provides added durability to the surface of the drum • Longer life compared to standard Dremel (408) sanding band • Mounted on an extra strong steel mandrel Specifications • Shank Diameter: 3.2mm • Working Diameter: 13.0mm • Working Length: 13.0mm • Grit: 60G Contents • Pack of 1
The product description is generated based on data from online stores. Before purchasing be sure to verify all information directly with the seller.
