The Bosch S1022Ehm Expert Thin Tough Metal Reciprocating Saw Blade Lasts Up To 50X Longer Than Bosch S922Ef Blade In Tough MaterialsCutting Thin Sheet Metal And Thin Wall Pipes Is A Tough Job But With A Good Recip Saw Blade You Can Manage. The Real Problems Start When You Cut Stainless Steel. This Tough High-Alloy Steel Is An Obstacle To Construc... moretion Or Renovation Workers And Destroys Blades. Bosch Carbide Technology Consigns These Problems To The Past. Ideal For Metal Workers Plumbers Installers And Renovators The Bosch Expert €˜Thin Tough Metal’ Reciprocating Saw Blade Not Only Does Jobs That Were Previously All But Impossible But Offers Exceptional Lifespan As Well.&Nbsp;Areas Of Application: Stainless Steel Sheets (2-4 Mm) Stainless Steel Profiles (Diameter ≪150 Mm) Glass Fibre Reinforced Plastic/Epoxy (≪150 Mm). Reduce The Stroke Rate Work Without Pendulum Action. Use Coolant. Sold As A Single Blade.Features:Exceptional Durability Is Built In With Bosch Carbide TechnologyExtra-Fine Teeth Cut Very Thin Material With EaseLong Life Cutting Thin Tough MetalExceptional Durability Is Built In With Bosch Carbide TechnologyExtra-Fine Teeth Cut Very Thin Material With EaseFits All S-Shank Reciprocating SawsSpecification:Quantity: 1Tooth Spacing:&Nbsp;1.4MmTooth Pitch: 18TpiTotal Length: 200MmTotal Length: 8MmWidth: 19MmThickness: 1MmBlade Material: CarbideBlade Material Abbreviation: CtBody Material:&Nbsp; HcsRecommended Min. Material Thickness: 1.5MmRecommended Max. Material Thickness: 4MmMax. Cut Capacity: 150MmPTDTSADIRBOSS1022EHM2608900363
The Bosch EXPERT S1022EHM is a carbide-tipped reciprocating saw blade engineered specifically for cutting thin stainless steel sheet and thin-wall pipe — materials that defeat conventional blades. Stainless steel presents a genuine challenge on site. Its high-alloy composition rapidly destroys standard bi-metal blades, making clean, repeatable cut... mores difficult to achieve. Bosch Carbide Technology addresses this directly by integrating carbide — one of the hardest materials available — into the tooth structure, delivering a blade that lasts up to 50x longer than the Bosch S922EF in comparable tough-metal applications. The extra-fine 18 TPI tooth geometry is ground to a precision profile suited to thin sheet work. This close pitch reduces breakout, improves cut accuracy, and minimises burring on stainless profiles and tube. The blade accepts all standard S-shank reciprocating saws, making it immediately compatible with most professional recip saw models on site. Suitable for metalworkers, plumbers, fabricators, and renovation contractors working with stainless steel sheet (2–4 mm) and stainless profiles up to 150 mm diameter. It is also rated for cutting glass fibre reinforced plastic and epoxy materials up to 150 mm. For best results, reduce stroke rate, disengage pendulum action, and apply coolant. Features and Benefits: • Bosch Carbide Technology integrates hardened carbide into the tooth structure for exceptional blade longevity • Extra-fine 18 TPI geometry produces accurate, clean cuts in thin stainless steel sheet and pipe • Lasts up to 50x longer than the Bosch S922EF blade in tough-metal cutting applications • Rated for stainless steel sheet, stainless profiles, and glass fibre reinforced plastic/epoxy • S-shank fitment is compatible with all standard reciprocating saws Specifications: Total length: 200 mm (8 inches) Width: 19 mm Thickness: 1 mm Tooth pitch: 18 TPI Tooth spacing: 1.4 mm Recommended material thickness: 1.5–4 mm Stainless steel sheet capacity: 2–4 mm Stainless steel profile capacity: up to 150 mm diameter GRP/epoxy cut capacity: up to 150 mm Maximum cut capacity: 150 mm Body material: HCS Blade material: Carbide (CT) Net weight: 0.042 kg
Bosch EXPERT S1022EHM Thin Tough Metal Cutting Reciprocating Sabre Saw Blades 200mm Pack of 1 2608900363
The Bosch EXPERT S1022EHM is a carbide-tipped reciprocating saw blade engineered specifically for cutting thin stainless steel sheet and thin-wall pipe — materials that defeat conventional blades. Stainless steel presents a genuine challenge on site. Its high-alloy composition rapidly destroys standard bi-metal blades, making clean, repeatable cut... mores difficult to achieve. Bosch Carbide Technology addresses this directly by integrating carbide — one of the hardest materials available — into the tooth structure, delivering a blade that lasts up to 50x longer than the Bosch S922EF in comparable tough-metal applications. The extra-fine 18 TPI tooth geometry is ground to a precision profile suited to thin sheet work. This close pitch reduces breakout, improves cut accuracy, and minimises burring on stainless profiles and tube. The blade accepts all standard S-shank reciprocating saws, making it immediately compatible with most professional recip saw models on site. Suitable for metalworkers, plumbers, fabricators, and renovation contractors working with stainless steel sheet (2–4 mm) and stainless profiles up to 150 mm diameter. It is also rated for cutting glass fibre reinforced plastic and epoxy materials up to 150 mm. For best results, reduce stroke rate, disengage pendulum action, and apply coolant. Features and Benefits: • Bosch Carbide Technology integrates hardened carbide into the tooth structure for exceptional blade longevity • Extra-fine 18 TPI geometry produces accurate, clean cuts in thin stainless steel sheet and pipe • Lasts up to 50x longer than the Bosch S922EF blade in tough-metal cutting applications • Rated for stainless steel sheet, stainless profiles, and glass fibre reinforced plastic/epoxy • S-shank fitment is compatible with all standard reciprocating saws Specifications: Total length: 200 mm (8 inches) Width: 19 mm Thickness: 1 mm Tooth pitch: 18 TPI Tooth spacing: 1.4 mm Recommended material thickness: 1.5–4 mm Stainless steel sheet capacity: 2–4 mm Stainless steel profile capacity: up to 150 mm diameter GRP/epoxy cut capacity: up to 150 mm Maximum cut capacity: 150 mm Body material: HCS Blade material: Carbide (CT) Net weight: 0.042 kg
The Bosch EXPERT S1022EHM is a carbide-tipped reciprocating saw blade engineered specifically for cutting thin stainless steel sheet and thin-wall pipe — materials that defeat conventional blades. Stainless steel presents a genuine challenge on site. Its high-alloy composition rapidly destroys standard bi-metal blades, making clean, repeatable cut... mores difficult to achieve. Bosch Carbide Technology addresses this directly by integrating carbide — one of the hardest materials available — into the tooth structure, delivering a blade that lasts up to 50x longer than the Bosch S922EF in comparable tough-metal applications. The extra-fine 18 TPI tooth geometry is ground to a precision profile suited to thin sheet work. This close pitch reduces breakout, improves cut accuracy, and minimises burring on stainless profiles and tube. The blade accepts all standard S-shank reciprocating saws, making it immediately compatible with most professional recip saw models on site. Suitable for metalworkers, plumbers, fabricators, and renovation contractors working with stainless steel sheet (2–4 mm) and stainless profiles up to 150 mm diameter. It is also rated for cutting glass fibre reinforced plastic and epoxy materials up to 150 mm. For best results, reduce stroke rate, disengage pendulum action, and apply coolant. Features and Benefits: • Bosch Carbide Technology integrates hardened carbide into the tooth structure for exceptional blade longevity • Extra-fine 18 TPI geometry produces accurate, clean cuts in thin stainless steel sheet and pipe • Lasts up to 50x longer than the Bosch S922EF blade in tough-metal cutting applications • Rated for stainless steel sheet, stainless profiles, and glass fibre reinforced plastic/epoxy • S-shank fitment is compatible with all standard reciprocating saws Specifications: Total length: 200 mm (8 inches) Width: 19 mm Thickness: 1 mm Tooth pitch: 18 TPI Tooth spacing: 1.4 mm Recommended material thickness: 1.5–4 mm Stainless steel sheet capacity: 2–4 mm Stainless steel profile capacity: up to 150 mm diameter GRP/epoxy cut capacity: up to 150 mm Maximum cut capacity: 150 mm Body material: HCS Blade material: Carbide (CT) Net weight: 0.042 kg
The Bosch S1022Ehm Expert Thin Tough Metal Reciprocating Saw Blade Lasts Up To 50X Longer Than Bosch S922Ef Blade In Tough MaterialsCutting Thin Sheet Metal And Thin Wall Pipes Is A Tough Job But With A Good Recip Saw Blade You Can Manage. The Real Problems Start When You Cut Stainless Steel. This Tough High-Alloy Steel Is An Obstacle To Construction Or Renovation Workers And Destroys Blades. Bosch Carbide Technology Consigns These Problems To The Past. Ideal For Metal Workers Plumbers Installers And Renovators The Bosch Expert €˜Thin Tough Metal’ Reciprocating Saw Blade Not Only Does Jobs That Were Previously All But Impossible But Offers Exceptional Lifespan As Well.&Nbsp;Areas Of Application: Stainless Steel Sheets (2-4 Mm) Stainless Steel Profiles (Diameter ≪150 Mm) Glass Fibre Reinforced Plastic/Epoxy (≪150 Mm). Reduce The Stroke Rate Work Without Pendulum Action. Use Coolant. Sold As A Single Blade.Features:Exceptional Durability Is Built In With Bosch Carbide TechnologyExtra-Fine Teeth Cut Very Thin Material With EaseLong Life Cutting Thin Tough MetalExceptional Durability Is Built In With Bosch Carbide TechnologyExtra-Fine Teeth Cut Very Thin Material With EaseFits All S-Shank Reciprocating SawsSpecification:Quantity: 1Tooth Spacing:&Nbsp;1.4MmTooth Pitch: 18TpiTotal Length: 200MmTotal Length: 8MmWidth: 19MmThickness: 1MmBlade Material: CarbideBlade Material Abbreviation: CtBody Material:&Nbsp; HcsRecommended Min. Material Thickness: 1.5MmRecommended Max. Material Thickness: 4MmMax. Cut Capacity: 150MmPTDTSADIRBOSS1022EHM2608900363
The product description is generated based on data from online stores. Before purchasing be sure to verify all information directly with the seller.
