Many blades advertised as being 'for multi material´ are fine in wood and soft metal, but fail to cut tougher elements like screws or metal fittings.The EXPERT 'Multi Material´ has no such problems:its carbide teeth can cut the hardest grades of steel.- again and again.Because the Bosch EXPERT 'Multi Material´ Reciprocating Saw Blade lasts so much... morelonger and performs in every material, it is of great value for professionals, who gain in productivity as well as saving on blades.Features:- Cutting Tough Building Materials.- Exceptional durability is built in with Bosch Carbide Technology.- Progressive tooth pitch to cut material of every thickness.- Fits all S-shank reciprocating saws.- Tapered tip reaches deeper into tight spaces.- Thick gauge blade offers extra robustness and stability.- Wide body for precise, straight cuts.Specifications:- Tooth spacing [mm]:3.0-4.0.- Tooth pitch [TPI]:6-8.- Total length [mm]:300.- Total length [Inch]:12.- Width [mm]:25.- Thickness [mm]:1.25.- Blade material:CARBIDE.- Blade material abbreviation:CT.- Body material:HCS.- Max.cut capacity [mm]:250.- Areas of application:Wood with (hardened) nails/metal (5-250 mm), wood with steel elements (5-250 mm), cast steel pipes (diameter < 8´´), glass fibre reinforced plastic/epoxy (< 250 mm).- Type:S 1256 XHM.
Bosch EXPERT S1256XHM Multi Material Reciprocating Sabre Saw Blades 2608900394
The Bosch EXPERT S1256XHM is a carbide-tipped multi material reciprocating saw blade designed for professional tradespeople who need consistent, long-lasting performance across a wide range of tough building materials. Many blades marketed as multi material perform adequately in wood and mild steel but fail when they encounter hardened screws, fit... moretings, or reinforced composites. The S1256XHM addresses this directly — its Bosch Carbide Technology integrates carbide into the tooth structure to cut even the hardest grades of steel, repeatedly and reliably. It is rated to last up to 50x longer than the Bosch S3456XF blade in tough materials. The progressive tooth pitch, ranging from 6 to 8 TPI, allows the blade to tackle both thin and thick materials in a single pass without swapping blades. A thick gauge body maintains stability and accuracy during heavy-duty cuts, while the tapered tip improves access in confined spaces — particularly useful during strip-out or renovation work. Suitable for wood containing hardened nails, cast steel pipes (up to 8" diameter), glass fibre reinforced plastic, epoxy, and construction composites, this blade is well matched to demanding site conditions where blade life directly affects productivity. It fits all S-shank reciprocating saws. Features and Benefits: • Carbide tooth technology for exceptional durability in hard metals and tough building materials • Progressive tooth pitch (6–8 TPI) cuts thin and thick materials effectively without blade changes • Thick gauge blade body provides stability and accuracy during heavy applications • Tapered tip for improved access in tight spaces and awkward start points • Wide blade body promotes straight, precise cuts along the intended line • Compatible with all S-shank reciprocating saws Application and Usage: Wood with (hardened) nails/metal (5–250 mm), wood with steel elements (5–250 mm), cast steel pipes (diameter < 8"), glass fibre reinforced plastic/epoxy (< 250 mm) Specifications: Total length: 300 mm (12 in) Width: 25 mm Thickness: 1.25 mm Tooth pitch: 6–8 TPI Tooth spacing: 3.0–4.0 mm Max. cut capacity: 250 mm Body material: HCS Blade material: Carbide (CT) Net weight: 0.080 kg
Bosch EXPERT S1256XHM Multi Material Reciprocating Sabre Saw Blades 300mm Pack of 1 2608900394
The Bosch EXPERT S1256XHM is a carbide-tipped multi material reciprocating saw blade designed for professional tradespeople who need consistent, long-lasting performance across a wide range of tough building materials. Many blades marketed as multi material perform adequately in wood and mild steel but fail when they encounter hardened screws, fit... moretings, or reinforced composites. The S1256XHM addresses this directly — its Bosch Carbide Technology integrates carbide into the tooth structure to cut even the hardest grades of steel, repeatedly and reliably. It is rated to last up to 50x longer than the Bosch S3456XF blade in tough materials. The progressive tooth pitch, ranging from 6 to 8 TPI, allows the blade to tackle both thin and thick materials in a single pass without swapping blades. A thick gauge body maintains stability and accuracy during heavy-duty cuts, while the tapered tip improves access in confined spaces — particularly useful during strip-out or renovation work. Suitable for wood containing hardened nails, cast steel pipes (up to 8" diameter), glass fibre reinforced plastic, epoxy, and construction composites, this blade is well matched to demanding site conditions where blade life directly affects productivity. It fits all S-shank reciprocating saws. Features and Benefits: • Carbide tooth technology for exceptional durability in hard metals and tough building materials • Progressive tooth pitch (6–8 TPI) cuts thin and thick materials effectively without blade changes • Thick gauge blade body provides stability and accuracy during heavy applications • Tapered tip for improved access in tight spaces and awkward start points • Wide blade body promotes straight, precise cuts along the intended line • Compatible with all S-shank reciprocating saws Application and Usage: Wood with (hardened) nails/metal (5–250 mm), wood with steel elements (5–250 mm), cast steel pipes (diameter < 8"), glass fibre reinforced plastic/epoxy (< 250 mm) Specifications: Total length: 300 mm (12 in) Width: 25 mm Thickness: 1.25 mm Tooth pitch: 6–8 TPI Tooth spacing: 3.0–4.0 mm Max. cut capacity: 250 mm Body material: HCS Blade material: Carbide (CT) Net weight: 0.080 kg
The Bosch EXPERT S1256XHM is a carbide-tipped multi material reciprocating saw blade designed for professional tradespeople who need consistent, long-lasting performance across a wide range of tough building materials. Many blades marketed as multi material perform adequately in wood and mild steel but fail when they encounter hardened screws, fit... moretings, or reinforced composites. The S1256XHM addresses this directly — its Bosch Carbide Technology integrates carbide into the tooth structure to cut even the hardest grades of steel, repeatedly and reliably. It is rated to last up to 50x longer than the Bosch S3456XF blade in tough materials. The progressive tooth pitch, ranging from 6 to 8 TPI, allows the blade to tackle both thin and thick materials in a single pass without swapping blades. A thick gauge body maintains stability and accuracy during heavy-duty cuts, while the tapered tip improves access in confined spaces — particularly useful during strip-out or renovation work. Suitable for wood containing hardened nails, cast steel pipes (up to 8" diameter), glass fibre reinforced plastic, epoxy, and construction composites, this blade is well matched to demanding site conditions where blade life directly affects productivity. It fits all S-shank reciprocating saws. Features and Benefits: • Carbide tooth technology for exceptional durability in hard metals and tough building materials • Progressive tooth pitch (6–8 TPI) cuts thin and thick materials effectively without blade changes • Thick gauge blade body provides stability and accuracy during heavy applications • Tapered tip for improved access in tight spaces and awkward start points • Wide blade body promotes straight, precise cuts along the intended line • Compatible with all S-shank reciprocating saws Application and Usage: Wood with (hardened) nails/metal (5–250 mm), wood with steel elements (5–250 mm), cast steel pipes (diameter < 8"), glass fibre reinforced plastic/epoxy (< 250 mm) Specifications: Total length: 300 mm (12 in) Width: 25 mm Thickness: 1.25 mm Tooth pitch: 6–8 TPI Tooth spacing: 3.0–4.0 mm Max. cut capacity: 250 mm Body material: HCS Blade material: Carbide (CT) Net weight: 0.080 kg
Many blades advertised as being 'for multi material´ are fine in wood and soft metal, but fail to cut tougher elements like screws or metal fittings.The EXPERT 'Multi Material´ has no such problems:its carbide teeth can cut the hardest grades of steel.- again and again.Because the Bosch EXPERT 'Multi Material´ Reciprocating Saw Blade lasts so much longer and performs in every material, it is of great value for professionals, who gain in productivity as well as saving on blades.Features:- Cutting Tough Building Materials.- Exceptional durability is built in with Bosch Carbide Technology.- Progressive tooth pitch to cut material of every thickness.- Fits all S-shank reciprocating saws.- Tapered tip reaches deeper into tight spaces.- Thick gauge blade offers extra robustness and stability.- Wide body for precise, straight cuts.Specifications:- Tooth spacing [mm]:3.0-4.0.- Tooth pitch [TPI]:6-8.- Total length [mm]:300.- Total length [Inch]:12.- Width [mm]:25.- Thickness [mm]:1.25.- Blade material:CARBIDE.- Blade material abbreviation:CT.- Body material:HCS.- Max.cut capacity [mm]:250.- Areas of application:Wood with (hardened) nails/metal (5-250 mm), wood with steel elements (5-250 mm), cast steel pipes (diameter < 8´´), glass fibre reinforced plastic/epoxy (< 250 mm).- Type:S 1256 XHM.
The product description is generated based on data from online stores. Before purchasing be sure to verify all information directly with the seller.
