MSW Core Drill - 3700 W - 610 rpm

On the construction site, time is money. Construction machinery need to perform accordingly. The core drilling machine from MSW reliably drills holes in hard construction materials such as concrete, masonry, or asphalt. The drill stand with guide rail allows you to drill even large holes with a diameter of up to 350 mm. The core drill boasts 3700 W of power and a speed of 610 RPM, making it suitable for core drilling with diameters up to 350 mm. The performance varies depending on the material: for example, you can drill diameters of up to 210 mm in cement. Thanks to the guide rail on the stand, you can achieve precise results up to a depth of ≤600 mm. For best results, use the three power levels and the largest drill diameter at the lowest speed. When drilling, rely on a dependable water cooling system. A connection is integrated directly into the device. This reduces wear on the drill bit, reduces maintenance on the power tool, and increases its service life. To service the carbon brushes, simply remove the protective panelling. Use diamond core drills in various diameters that can be securely attached to the machine. The core drill allows you to bore into reinforced concrete, cement, masonry, asphalt, and natural stone. The 3.5 m long power cable offers you maximum freedom of movement. Thanks to the built-in PRCD in the cable, you can always use the machine safely. Should there be a short circuit in the drill or cable, operation immediately ceases.