STAMOS MIG/MAG - 200 A - 60 duty cycle - TIG Liftarc - manual - flux

The MIG/MAG welding machine MAGITEX 200 makes use of state-of-the-art IGBT inverter technology, delivering both flexibility and quality. The infinitely variable regulation of the welding current up to 200 A ensures optimum welding seams for a wide variety of welding jobs. When welding with wire, choose between solid wire, requiring a shielding gas, or flux-cored wire without additional gas. The MIG welding machine is supplemented with the option for electrode welding, allowing you to use it outdoors in windy conditions. You can also use the TIG Liftarc function. The clear control panel ensures all values are easily monitored. The selection of the welding method between MIG / MAG, flux, TIG Liftarc and MMA is just as easy. At full power, the MIG welder achieves 200 A and a 60 % duty cycle, allowing you to reliably tackle even difficult repair and renovation work. There is an integrated compartment for the wire spool. Depending on the nature and diameter of the welding wire, you can select the appropriate mode on the control panel to achieve optimal welding results. MIG welding uses inert gases for copper, magnesium and other non-ferrous metals and their alloys; MAG welding with active gases is ideal for mild steel, steel and most of its alloys. If you want to weld without shielding gas, use a cored wire and select flux mode. The TIG welding process uses Liftarc ignition to activate the arc. You can easily control the amperage up to 160 A via the control panel. MMA welding mode is primarily used for iron or copper, as well as for alloys such as cast iron or steel. As you do not need gas to weld with a coated electrode, you can also use the device in adverse conditions such as wind. The Arc Force function stabilises the arc and thus enables optimum welding results.