Liqui Moly 2425 Pro-Line Engine Flush - LM2425 (1 Litre)

Cleans the engine from the inside and removes deposits from oil holes, bearings, the piston ring area, etc. Reduces engine noise and oil consumption. These highly effective detergent and dispersant additives in association with the carrier fluid have undergone extensive testing in the laboratory and in practical field trials for their ability to dissolve deposits. Oil-soluble and oil-insoluble residues are brought into suspension and removed from the oil circuit during the next oil change. The fresh oil can then deliver its full performance in the cleaned engine. Key Benefits: highly economical Gentle cleaning Suitable for diesel particulate filters Tested for turbochargers and catalytic converters Simple to use Does not attack common sealing materials Rapid cleaning Areas of application: For cleaning and flushing out the oil circuits of gasoline and diesel engines. Ensures the perfect hydraulic function of oil-controlled systems such as VVT, VANOS and similar. Can be safely used in vehicles with toothed belt running in oil. Application: 500 ml is sufficient for up to 5 l of oil. Add to motor oil at operating temperature before an oil change. After adding the product, allow the engine to idle for 10 – 15 minutes depending on the degree of contamination. Then change the oil and the filter. Compatible with all commercially available motor oils. Not suitable for motorbikes with a wet clutch!