single sided, single sided, 7 levels, extension shelf unit

Tyre shelf unit, zinc plated, single sided, 7 levels, extension shelf unit. Supplied = flat pack. Shelf unit type = extension unit. Shelf unit height = 5100 mm. Width = 1030 mm. Depth = 320 mm. Shelf width = 1020 mm. Shelf depth = 300 mm. Wheel width = 255 mm. Tyres per shelf bay = 28 pcs. Shelf height adjustment increments = 60 mm. Number of levels = 7 pcs. Max. shelf load = 140 kg. Max. bay load = 1000 kg. Material = steel. Finish = galvanised. Design = plug in. Shelf unit design = single sided. Product type = tyre shelving units. Suitable for car tyres and rims up to 255 mm wide. Uncomplicated assembly. Zinc plated surface. Tyre levels adjustable in 60 mm increments. The specified room height is valid for max. tyre diameter of 685 mm. If the tyre diameter is larger, the required room height is increased accordingly. For single shelf units from 4 levels , the use of wall brackets and floor anchors is required. Wall brackets for solid masonry walls (e.g. concrete, limestone) and floor anchors (for screed and concrete) are included in delivery. Important information Please contact us if the supplied wall brackets and floor anchors are NOT suitable for your walls and/or floors. If the height of the shelf unit equals more than 5 times its depth, it must be secured against tipping with suitable floor or wall fasteners. The included assembly and installation instructions must be observed. External dimensions Standard shelf unit shelf width + 50 mm Extension shelf unit shelf width + 10 mm Please note: For single shelf units from 4 levels, the use of wall brackets and floor anchors is required. Wall brackets for solid masonry walls (e.g. concrete, limestone) and floor anchors (for screed and concrete) are included in delivery. Please contact us if the supplied wall brackets and floor anchors are NOT suitable for your walls and/or floors. The included assembly and installation instructions must be observed. Also available for the storage of HGV tyres on request. The specified max. load values are applicable with uniform load distribution. Additional shelf levels may be used if the specified max. bay load is observed.