standard shelf unit, shelf width 1200 mm, 6 shelves, standard shelf unit, shelf width 1200 mm, 6 shelves, shelf depth 600 mm

CLEANA boltless shelving unit, standard shelf unit, shelf width 1200 mm, 6 shelves, shelf depth 600 mm, max. shelf load 180 kg. Supplied = flat pack. Shelf unit type = standard unit. Shelf unit height = 2280 mm. Shelf width = 1200 mm. Shelf depth = 600 mm. Width = 1250 mm. Depth = 620 mm. Shelf height adjustment increments = 30 mm. Max. bay load = 2500 kg. Max. shelf load = 180 kg. Number of shelves = 6 pcs. Material = steel. Material properties = suitable for use with foodstuffs and condensation-proof. Colour = pure white RAL 9010. Finish = coated. Temperature resistance = -20 °C to +40 °C. Design = plug in. Product type = hygienic boltless shelving units. Ideal for catering, hotels, laundries, offices and storage areas. With high quality, innovative CLEANA coating which is suitable for foodstuffs - this makes CLEANA shelving units suitable for the storage of foodstuffs and textiles. The suitability of the CLEANA coating for use with foodstuffs has been certified by the German institute for foodstuffs, consumer goods and environmental analysis of Nehring in Braunschweig. CLEANA shelving units are thus a cost effective alternative to stainless steel shelving units. CLEANA shelving units are temperature resistant from -20 °C to +40 °C. The CLEANA coating is condensation-proof, will not blister and does not lose its sheen. Optimum mechanical properties of the CLEANA coating: as it is applied to a hot dip galvanised substrate, it will not rust even if the coating is damaged. All edges are bevelled, therefore no risk of injury. Modular shelf design for easy plug-in assembly. Shelf levels adjustable in 30 mm increments. The CLEANA white powder coating system meets the strict requirements of the German Food and Feed Code (LFGB) for direct contact with foodstuffs (as well as unpacked foods), as well as article 3 of the Directive (EU) no. 1935/2004 (STJR09-070, 15.07.2010). It is necessary to reinforce every standard shelf unit and every other extension shelf unit with the supplied cross braces. External shelf unit dimensions: Standard shelf unit Shelf width + 50 mm, shelf depth + 20 mm. Extension shelf unit Shelf width + 10 mm, shelf depth + 20 mm. If the height of the shelf unit equals more than 5 times its depth, it must be secured against tipping with suitable floor or wall fasteners. The specified max. load values are applicable with uniform load distribution. Additional shelves may be used if the specified max. bay load is observed.