Cytron Japan 40mm diameter carbon set allowed SCT-33/AD-SW Carry-on

Adopts 11 layer carbon pipe with 40/36/32/28mm diameter. It is lightweight yet strong, allowing for stable shooting. The adoption of a 4-tier structure has made it more compact. The shortened length is only about 325mm. The size fits within the carry-on restrictions of major airlines, so by carrying it on board as hand luggage, you can prevent accidents such as damage to the carbon fiber caused by checking it into the cargo hold. Ideal for overseas expeditions such as observing solar eclipses. The opening angle of each tripod leg can be changed to three levels with a single touch. In consideration of stability when an equatorial mount and telescope are installed, the leg opening angle is larger than that of regular photography tripods even during normal use. The total height when the legs are fully opened is approximately 112mm (when the camera head adapter and stainless steel head are attached), so it can also be used for low-angle photography such as macro photography. By replacing the adapter on the top of the tripod, it can also be used with general camera heads and equatorial mounts made by other companies. The included adapter is compatible with Sky-Watcher's EQ5, EQ3, and EQM35, as well as Vixen's old SP, GP, and GPD series. An adapter compatible with common U1/4-3/8 screws is also included, so it can be used not only as an equatorial mount but also as a tripod for general photography. Tripod body weight: 2,120g (when stainless steel head is attached) ・Adapter weight: SW-EQ adapter: Approx. 440g / Camera head adapter: Approx. 180g ・Reduced length: Approx. 325mm* / Extension: approx. 740mm*・Total height: approx. 112mm to approx. 655mm* (*when camera head adapter and stainless steel head are attached)・Pipe diameter: 1st stage: 40mm/2nd stage: 36mm/3rd stage: 32mm/ 4th stage: 28mm・Maximum load: Approx. 30kg・With leg adjustment mechanism Accessories: Stainless steel head, rubber head, SW-EQ adapter, camera head adapter (with U1/4-3/8 screw), spirit level, soft case *SW-EQ adapter compatible models: Sky-Watcher EQ3, EQ5, EQM35, AZ-EQ5GT, Vixen old GP, GPD2 (joint diameter 60mm) A carbon tripod specially developed for astrophotography. By adopting a 4-tier structure, the retracted length is approximately 325mm, making it extremely compact. It can also be carried on board an airplane, making it ideal for overseas expeditions such as observing solar eclipses. Adapters for Sky-Watcher's EQ3, EQ5, EQM35 and common U1/4-3/8 screws are included. A tripod that can be used for both astronomical telescopes and general cameras. Adopts a replaceable stone head. Stainless steel head and rubber foot are included as standard. It can be replaced depending on the purpose of use. Equipped with a spirit level to help ensure accurate installation of equipment. Also comes with a special soft case that is convenient to carry. Not only is it easy to carry, but it also protects your tripod from damage caused by external factors when you go on an expedition.