HP main unit card size A4 A3 4 rollers Warm up in about 1 second Easy operation Compatible with micron film home (

[Simple and easy-to-use HP laminator] Warms up in about 1 second*. Press the temperature setting button and when the light turns on, preparation is complete. Compatible with both HOT and COLD lamination. Three types of film can be easily set using the temperature setting button. *For 100 microns [Protects the beauty of flyers and photos] Laminating prevents discoloration and damage and is water resistant, preventing damage to flyers and photos and protecting their beauty. Pouch film is compatible with thicknesses up to 100-150 microns. Even if the film gets jammed, you can remove it by pressing the emergency stop button. [Easy 3-step instructions] 1. Press the temperature setting button, select the film type, and wait until the light turns on. ② Place the original on the film. ③Put it into the insertion slot and you're done. / Comes with a warp prevention tray to prevent film from warping immediately after processing. [Precautions for use] Please follow the instructions below to avoid clogging the film. *Do not cut the film. *Do not leave blank spaces on the film. *Do not insert the film from the open side. *Do not insert the film at an angle. [Product details] Size: Approx. width 49 x depth 15 x height 8cm / Weight: Approx. 2kg / Warm-up time: 100μm approx. 1 second 150μm approx. 10 seconds / Power consumption: 1450W / Applicable size: A4 (thickness 100-150μm ) / Number of rollers: 4 / Processing time (A4/1 sheet): 60 seconds [Simple and easy-to-use HP laminator] Warms up in about 1 second*. Press the temperature setting button and when the light turns on, preparation is complete. Compatible with both HOT and COLD laminates. Three types of film can be easily set using the temperature setting button. *For 100 microns [Protects the beauty of flyers and photos] Laminating prevents discoloration and damage and is water resistant, so it prevents damage to flyers and photos and protects their beauty. Pouch film is compatible with thicknesses up to 100 to 150 microns. Even if the film gets jammed, you can remove it by pressing the emergency stop button. [Easy 3-step instructions] 1. Press the temperature setting button, select the film type, and wait until the light turns on. ② Place the original on the film. ③Put it into the insertion slot and you're done. / Comes with a warp prevention tray to prevent film from warping immediately after processing. [Warm-up time]: (100μm) approximately 1 second / (150μm) approximately 10 seconds [Power consumption]: 1450W [Function]: Easy operation [Number of rollers]: 4 [Processing time (A4/1 sheet)]: 60 Seconds / [Cord length]: Approximately 1.5m [Supported size]: A4 (thickness 100-150μm)・[Product size]: Width approx. 49 x Depth approx. 15 x Height approx. 8cm [Weight] Approx. 2kg [Precautions for use] Please follow the instructions below to avoid clogging the film. *Do not cut the film. *Do not leave blank spaces on the film. *Do not insert the film from the open side. *Please do not insert the