Cross Forest SONY VLOGCAM Glass Film LCD Protective Film ZV-1F / ZV-E10 / ZV-E10L / ZV-1 / ZV-1G CF-GCSZV1

Compatible models: SONY VLOGCAM ZV-1F / ZV-E10 / ZV-E10L / ZV-1 / ZV-1G High quality glass film made in Japan with a thickness of 0.33mm (actual measurement: approx. 0.44mm). Strong water- and oil-repellent coating provides smooth finger gliding and high fingerprint resistance. The rounded edges have been processed to minimize the stepped feel. Uses a Japanese resin package with a glass film installation guide. Cross Forest's glass films are produced and sold with a focus on the highest quality, including the quality of the glass, silicone layer, and surface coating, as well as the long-term performance of the glass, at a manufacturing cost. All products are visually inspected one by one by Japanese staff in Japan for foreign objects, cracks, and abnormalities on the application surface. Glass film is simply a transparent plate (glass). You can't really tell the difference by looking at it. However, once you use it, you will be able to experience its performance and we will recommend it with confidence. *Please note: When applying the glass film, you may experience a problem where one edge of the film comes off. This symptom occurs in most cases when the glass film is reapplied to correct misalignment, and when lifting the glass film, the adhesive surface, such as the silicone layer, is pushed with a fingernail, causing the film to lift. If it is applied properly in one shot, there is almost no chance of any lifting. Therefore, we recommend that you perform a temporary positioning simulation before pasting. Also, when applying, be careful not to get foreign objects into the adhesive surface or touch the adhesive layer with your fingers.