At Tools Series Shina Mini 10 Piece Set Plastic Model Gunpla Gate Processing @ROOMS

[Set of 6 Shiners for Finishing Plastic Models] A sponge file that simplifies gate processing and improves the finish of models such as Gundam models. It has been well received by a wide range of people, from beginners to advanced users, and is recommended for those who want to finish without painting and those who want to clean the gate marks on clear parts. It can also be used as a nail file for nail polishing. [Soft stick that is easy to use] Made of sponge that has moderate flexibility and can be used on parts with curved surfaces. It has an easy-to-handle size and shape that allows you to hold it firmly in your hand. The tip is tapered, making it convenient for cutting small parts! [Two types of files for double-sided use] The roughness of the abrasive is different on the back and front, allowing surface treatments with different textures. The green surface (No. 1000: equivalent to regular No. 600 to 800) and the white surface (No. 4000: for mirror finishing) can be used alone, and when used together, the finish will be more beautiful and glossy. [Gate treatment is also easy] After molding the gate marks, you can clean them by polishing them with the green side of the shiner. If you want a matte finish, the work is complete at this point. Furthermore, sanding with a white surface creates a smooth mirror finish, and gate marks can be neatly removed without painting, which is especially effective on transparent parts. [Also suitable for surface treatment] Perfect for polishing the surface, such as sink marks and removing traces of coarse sandpaper. It can be used not only to improve the completeness of unassembled products, but also to create higher quality finishes, such as preparing the base before painting and sanding (eliminating steps) after clear coating. [Perfect for surface treatment of curved parts] Many model parts include not only flat surfaces but also curved parts. If you choose the wrong file and file with a flat object, you may end up scratching the surface. A sponge file has just the right amount of flexibility, neither too soft nor too hard, so it fits the part perfectly, allowing you to file to take advantage of the curved surface. Furthermore, since it has a solid thickness of 8mm, the force applied to the file is spread evenly, allowing you to sand the entire surface evenly. It can process both flat and curved surfaces uniformly, regardless of the shape of the part♪ [How to use for gate processing] The roughness of the abrasive is different on the back and front, so two types of surface treatments are possible by using both sides. . Each can be used alone, but when used together, first smooth the surface with the coarse green surface (#1000), then polish with the white surface (#4000) to create a smooth, mirror-like finish. ① First, cut out the gate neatly using nippers or a design knife. ②After that, polish the remaining gate marks with the green side of the shiner so that they blend into the surface of the parts. If