United Kingdom

Vision 4883105

Photos - Speakers Vision 4883105
Vision 4883105
from £203.00 

Buy Vision 4883105

When you make a purchase through links on our site, we may earn an affiliate commission.

Vision Audio Visual Vision CS-1900P

Coaxial Speaker / Diameter 232 mm / Mounting Depth 95 mm / Nominal Load 70 Watt / Min Frequency 80 Hz / Max Frequency 20,000 Hz
Idealo.co.uk
Delivery: in United Kingdom
Report
£203.40

Vision CS-1900P car speaker 2-way Round 2 pc(s)

Vision CS-1900P car speaker 2-way Round 2 pc(s)
Smartteck.co.uk
Delivery: to United Kingdom
Report
£231.18

Vision 4883105

The CS-1900P are based on Vision's passive ceiling loudspeakers but have a powerful 70 watt amplifier built in. Easy to use and virtually invisible, these professional-grade loudspeakers are ideal for meeting spaces that can be divided, or at home.Bluetooth:- Easy to connect to. Bluetooth can be disabled via the remote control or RS-232.Rename Blue... moretooth, Set Pin:- Connect via USB and run software (see downloads tab) to rename and set the pin. The speakers stores the details for up - to eight paired devices. Even if you change the PIN these eight devices will still connect without needing the new pin. When you pair a 9th device the 1st device will need to enter the password again to connect.Auto-Switching:- Choose to change to the Bluetooth input automatically when a device is paired, or manually switch.Remote Control:- An included IR remote control gives the user full control, including bass and treble adjustment.IR Front and Rear:- Switch between the front IR receiver, or the rear IR receiver if using a wired control system, or off.Master/Slave:- The amplifier is housed in the master loudspeaker which has the connection panel, and a speaker output connects to the included passive slave loudspeaker.Daisy-Chain:- If you require two pairs for the room an audio output allows you to pass the audio signal on to a second pair of CS-1900P. In fact you can daisy-chain as many pairs as you need using this line-level audio output.RS-232:- For integration into a controlled audio-visual environment they can be controlled with RS-232 (serial) codes. Vision´s Techconnect Control can be used to control them.Memory:- When power is turned on at the wall the CS-1900P automatically turn on and resumes the previous input and volume setting.2-Way with Kevlar Driver:- Two-way woofer and tweeter design with quality materials and a passive cross-over for superior audio.Auto-Standby:- If the amplifier senses no input for ten minutes it will automatically go into standby mode.Bluetooth device NOT PAIRED when it goes into standby: they will wake up when you pair a device or play audio though the line-level input.Bluetooth device PAIRED when it goes into standby: if the BT input was selected only the Bluetooth source will wake them up. If the line-level input was selected only a line-level input will wake them up.Automatic standby can be disabled with the remote control.Magnetic Grille:- The bezel-less grille clips into place once the speakers are secured.Simple to fit:- A cutout template is included so the installer can easily trace the cut line in the ceiling tile. Cut a 198 mm hole and fit the speaker, it's quick and easy.Features:- Integrated 2 x 35 watt (RMS) amplifier- 1 x wired input / 1 x Bluetooth input- Switches between stand alone or daisy-chain mode- IR remote included- BT can be disabledSpecifications:- Loudspeaker Dimensions: 232 X 95 Mm (diameter 224 Mm Without Grille)- Cutout Size: 198 Mm- Carton Dimensions: 253 X 253 X 273 Mm- Speaker Weight Master: 1.3
Tradeinn.com
Delivery: in United Kingdom
Report
£539.49
The CS-1900P are based on Vision's passive ceiling loudspeakers but have a powerful 70 watt amplifier built in. Easy to use and virtually invisible, these professional-grade loudspeakers are ideal for meeting spaces that can be divided, or at home.Bluetooth:- Easy to connect to. Bluetooth can be disabled via the remote control or RS-232.Rename Bluetooth, Set Pin:- Connect via USB and run software (see downloads tab) to rename and set the pin. The speakers stores the details for up - to eight paired devices. Even if you change the PIN these eight devices will still connect without needing the new pin. When you pair a 9th device the 1st device will need to enter the password again to connect.Auto-Switching:- Choose to change to the Bluetooth input automatically when a device is paired, or manually switch.Remote Control:- An included IR remote control gives the user full control, including bass and treble adjustment.IR Front and Rear:- Switch between the front IR receiver, or the rear IR receiver if using a wired control system, or off.Master/Slave:- The amplifier is housed in the master loudspeaker which has the connection panel, and a speaker output connects to the included passive slave loudspeaker.Daisy-Chain:- If you require two pairs for the room an audio output allows you to pass the audio signal on to a second pair of CS-1900P. In fact you can daisy-chain as many pairs as you need using this line-level audio output.RS-232:- For integration into a controlled audio-visual environment they can be controlled with RS-232 (serial) codes. Vision´s Techconnect Control can be used to control them.Memory:- When power is turned on at the wall the CS-1900P automatically turn on and resumes the previous input and volume setting.2-Way with Kevlar Driver:- Two-way woofer and tweeter design with quality materials and a passive cross-over for superior audio.Auto-Standby:- If the amplifier senses no input for ten minutes it will automatically go into standby mode.Bluetooth device NOT PAIRED when it goes into standby: they will wake up when you pair a device or play audio though the line-level input.Bluetooth device PAIRED when it goes into standby: if the BT input was selected only the Bluetooth source will wake them up. If the line-level input was selected only a line-level input will wake them up.Automatic standby can be disabled with the remote control.Magnetic Grille:- The bezel-less grille clips into place once the speakers are secured.Simple to fit:- A cutout template is included so the installer can easily trace the cut line in the ceiling tile. Cut a 198 mm hole and fit the speaker, it's quick and easy.Features:- Integrated 2 x 35 watt (RMS) amplifier- 1 x wired input / 1 x Bluetooth input- Switches between stand alone or daisy-chain mode- IR remote included- BT can be disabledSpecifications:- Loudspeaker Dimensions: 232 X 95 Mm (diameter 224 Mm Without Grille)- Cutout Size: 198 Mm- Carton Dimensions: 253 X 253 X 273 Mm- Speaker Weight Master: 1.3
Product description is based on database from online stores. Be sure to verify all information directly with seller before purchasing.

How to place an order?How to add store?
Remember that online store is responsible for accuracy of information about price, warranty and delivery!
Filters