Entaniya Waterproof Cube Case 125x Depth 125x Height CC-WP-125 (Width 125mm)

---------------------------------------------------------------------- 【Cautions for using electrical products】 When using electrical appliances, please note that the voltage is different from that of Japan, which may cause malfunctions. Since the plug type is Japan type(A or B type), please check the voltage and use a transformer. Please note that a transformer is different from a conversion adapter. We are not responsible for malfunctions caused by use without a transformer. ---------------------------------------------------------------------- 5 acrylic panels 1 aluminum panel (with tripod hole for bottom) Protection class: IP68 Size (outer size): 125 x 125 x 125 mm Size (inner size): 95 x 95 x 95 mm Panel material: 5 pieces of acrylic (6mm) / 1 piece of aluminum (for the bottom) Frame material: Aluminum (die-cast integrally molded) [Bottom panel] Material: Aluminum Screw holes: 3/8-16 x 3 / 1/4-20 x 2 [Water Pressure Test] As a result of a water pressure test of 3 atm (equivalent to a depth of 30 m), there was no water seepage inside, confirming IP68 compliant waterproofness. It is waterproof and can be used even when completely submerged in water. *This product is waterproof only when it is securely sealed. *If a connector is used, it depends on the waterproof performance of the connector. [Salt spray test] Acceleration of corrosion due to exposure to the atmosphere was evaluated using a salt spray test. During 48 and 100 hour tests, there was no blistering, corrosion or peeling of the painted surface. [Cube-shaped waterproof case (IP68 compliant)] Consists of five 6mm thick acrylic panels and an aluminum panel for the bottom with a tripod screw hole. The panels can be removed and replaced, so even if they are scratched, damaged, or have been modified, they can be replaced to restore the original condition. [Customize by selecting the panel according to your application] Various optional panels are available, and you can customize it according to your application. There are many optional panels, including a panel with a dome that is convenient for storing cameras, a panel with a window that allows you to check instruments, etc., and a panel with a pedestal that allows you to attach a Raspberry Pi. The aluminum frame is die-cast and integrally molded, so there are no seams and high waterproof performance is achieved.