Sanwa Direct Slider Retrofit Clamp Full Mouse Storage Compatible 4 Level Height Adjustment L Size check in

[Important/Note] Please be sure to check the installation size in the product image before purchasing. After purchasing, there are cases where we receive inquiries about the product being unable to be installed due to the wrong size. Please check in advance whether it can be installed on your desk (size when installing, whether there is anything interfering with the back of the desk top when installing, etc.) before purchasing. A keyboard slider that can be easily attached to an existing desk with a clamp. The shelf part (effective ground surface) is approximately W70 x D26.5cm, so there is plenty of room to place a full keyboard and mouse. Clamps are compatible with thicknesses from 15 to 40 mm. The height of the clamp can be adjusted in 4 levels (75mm/90mm/105mm/120mm), and the distance from the bottom of the top plate to the slider can be adjusted. Since the keyboard and mouse can be operated close to your body, you can type with your back straight without having to lean forward and put stress on your body. Since you don't have to place your keyboard and mouse on your desk, you can spread out your documents and materials while working. When the keyboard is not in use, it can be slid and stored under the desk. Warranty period: 6 months from the date of purchase ■Weight: Approx. 2.6kg ■Effective size of top plate: approx. W700 x D265mm ■Delivery form: Knockdown assembly type ■Material: Clamp/Steel, Shelf/HIPS (High Impact Polystyrene) ■Load capacity: 10kg ■Production area: Taiwan ■Warranty period: 6 months from the date of purchase ■Instruction manual: Japanese instruction manual available ■Compatible desks: Flat desks with no interfering objects such as drawers on the back of the top, desks with wooden tops with a thickness of 15 mm to 40 mm. *When installing, please make sure that there are no obstacles such as drawers. *Do not put excessive weight on the keyboard slider.