When you make a purchase through links on our site, we may earn an affiliate commission.
Cleveland Cleveland Zipcore XL Irons - Steel
Cleveland Zipcore XL Golf Irons - Steel Discover a stylish set loaded with exceptional performance - introducing the new ZipCore XL Irons in Steel, some of our most thrilling offerings to date. Distance-focused and forgiving long irons are coupled with precise short irons. It's power where you need it and control where you want it, all in one remar... morekable set. ZIPCORE In the 8i–SW sets, ZipCore Technology strategically positions the Center of Gravity exactly where you make contact with the ball, ensuring more consistent performance and improved forgiveness. With an abundance of high/low and heel/toe MOI, you'll experience heightened feel and control. HYDRAZIP Cleveland's exclusive dynamic blast and laser-milled line system generate surface roughness to boost friction, optimising spin for increased distance with long irons and precise control with short irons. MAINFRAME The MainFrame system in the 4i–7i consists of channels and cavities meticulously milled into the rear of ZipCore XL Iron faces, aiming to maximise flex upon impact. By enhancing COR and shifting mass for a lower CG, MainFrame generates increased ball speed, along with improved consistency and forgiveness. XL HEAD DESIGN The enlarged head has allowed Cleveland to redistribute more mass away from the center of the club, resulting in higher MOI. This increased MOI significantly enhances forgiveness, ensuring that all your shots launch high and fly straight. ACTION MASS CB A strategically positioned 8g weight inside the shaft's butt end provides improved balance, enhancing control without additional effort. This counterbalance imparts a lighter feel to the clubhead during the takeaway and assists in delivering a square face throughout your downswing. Zipcore XL Irons - Steel Specifications: Lofts: 4-20°, 5-23°, 6-26°, 7-29°, 8-33°, 9-38°, PW-43°, GW-48°, SW-54° Swingweight: D2, D3 Lengths: 4-39.125", 5-38.5", 6-37.875", 7-37.25", 8-36.75", 9-36.25", PW-36", GW-35.75", SW-35.75" Dexterity: Right Hand and Left Hand Zipcore XL Irons - Steel Standard Shafts: KBS Tour Lite (R, S) Zipcore XL Irons - Steel Standard Grip: Lamkin Crossline 360 Standard 50g
Cleveland Zipcore XL Golf Irons - Steel Discover a stylish set loaded with exceptional performance - introducing the new ZipCore XL Irons in Steel, some of our most thrilling offerings to date. Distance-focused and forgiving long irons are coupled with precise short irons. It's power where you need it and control where you want it, all in one remar... morekable set. ZIPCORE In the 8i–SW sets, ZipCore Technology strategically positions the Center of Gravity exactly where you make contact with the ball, ensuring more consistent performance and improved forgiveness. With an abundance of high/low and heel/toe MOI, you'll experience heightened feel and control. HYDRAZIP Cleveland's exclusive dynamic blast and laser-milled line system generate surface roughness to boost friction, optimising spin for increased distance with long irons and precise control with short irons. MAINFRAME The MainFrame system in the 4i–7i consists of channels and cavities meticulously milled into the rear of ZipCore XL Iron faces, aiming to maximise flex upon impact. By enhancing COR and shifting mass for a lower CG, MainFrame generates increased ball speed, along with improved consistency and forgiveness. XL HEAD DESIGN The enlarged head has allowed Cleveland to redistribute more mass away from the center of the club, resulting in higher MOI. This increased MOI significantly enhances forgiveness, ensuring that all your shots launch high and fly straight. ACTION MASS CB A strategically positioned 8g weight inside the shaft's butt end provides improved balance, enhancing control without additional effort. This counterbalance imparts a lighter feel to the clubhead during the takeaway and assists in delivering a square face throughout your downswing. Zipcore XL Irons - Steel Specifications: Lofts: 4-20°, 5-23°, 6-26°, 7-29°, 8-33°, 9-38°, PW-43°, GW-48°, SW-54° Swingweight: D2, D3 Lengths: 4-39.125", 5-38.5", 6-37.875", 7-37.25", 8-36.75", 9-36.25", PW-36", GW-35.75", SW-35.75" Dexterity: Right Hand and Left Hand Zipcore XL Irons - Steel Standard Shafts: KBS Tour Lite (R, S) Zipcore XL Irons - Steel Standard Grip: Lamkin Crossline 360 Standard 50g
Cleveland Zipcore XL Golf Irons - Steel Discover a stylish set loaded with exceptional performance - introducing the new ZipCore XL Irons in Steel, some of our most thrilling offerings to date. Distance-focused and forgiving long irons are coupled with precise short irons. It's power where you need it and control where you want it, all in one remar... morekable set. ZIPCORE In the 8i–SW sets, ZipCore Technology strategically positions the Center of Gravity exactly where you make contact with the ball, ensuring more consistent performance and improved forgiveness. With an abundance of high/low and heel/toe MOI, you'll experience heightened feel and control. HYDRAZIP Cleveland's exclusive dynamic blast and laser-milled line system generate surface roughness to boost friction, optimising spin for increased distance with long irons and precise control with short irons. MAINFRAME The MainFrame system in the 4i–7i consists of channels and cavities meticulously milled into the rear of ZipCore XL Iron faces, aiming to maximise flex upon impact. By enhancing COR and shifting mass for a lower CG, MainFrame generates increased ball speed, along with improved consistency and forgiveness. XL HEAD DESIGN The enlarged head has allowed Cleveland to redistribute more mass away from the center of the club, resulting in higher MOI. This increased MOI significantly enhances forgiveness, ensuring that all your shots launch high and fly straight. ACTION MASS CB A strategically positioned 8g weight inside the shaft's butt end provides improved balance, enhancing control without additional effort. This counterbalance imparts a lighter feel to the clubhead during the takeaway and assists in delivering a square face throughout your downswing. Zipcore XL Irons - Steel Specifications: Lofts: 4-20°, 5-23°, 6-26°, 7-29°, 8-33°, 9-38°, PW-43°, GW-48°, SW-54° Swingweight: D2, D3 Lengths: 4-39.125", 5-38.5", 6-37.875", 7-37.25", 8-36.75", 9-36.25", PW-36", GW-35.75", SW-35.75" Dexterity: Right Hand and Left Hand Zipcore XL Irons - Steel Standard Shafts: KBS Tour Lite (R, S) Zipcore XL Irons - Steel Standard Grip: Lamkin Crossline 360 Standard 50g
Cleveland Zipcore XL Golf Irons - Steel Discover a stylish set loaded with exceptional performance - introducing the new ZipCore XL Irons in Steel, some of our most thrilling offerings to date. Distance-focused and forgiving long irons are coupled with precise short irons. It's power where you need it and control where you want it, all in one remar... morekable set. ZIPCORE In the 8i–SW sets, ZipCore Technology strategically positions the Center of Gravity exactly where you make contact with the ball, ensuring more consistent performance and improved forgiveness. With an abundance of high/low and heel/toe MOI, you'll experience heightened feel and control. HYDRAZIP Cleveland's exclusive dynamic blast and laser-milled line system generate surface roughness to boost friction, optimising spin for increased distance with long irons and precise control with short irons. MAINFRAME The MainFrame system in the 4i–7i consists of channels and cavities meticulously milled into the rear of ZipCore XL Iron faces, aiming to maximise flex upon impact. By enhancing COR and shifting mass for a lower CG, MainFrame generates increased ball speed, along with improved consistency and forgiveness. XL HEAD DESIGN The enlarged head has allowed Cleveland to redistribute more mass away from the center of the club, resulting in higher MOI. This increased MOI significantly enhances forgiveness, ensuring that all your shots launch high and fly straight. ACTION MASS CB A strategically positioned 8g weight inside the shaft's butt end provides improved balance, enhancing control without additional effort. This counterbalance imparts a lighter feel to the clubhead during the takeaway and assists in delivering a square face throughout your downswing. Zipcore XL Irons - Steel Specifications: Lofts: 4-20°, 5-23°, 6-26°, 7-29°, 8-33°, 9-38°, PW-43°, GW-48°, SW-54° Swingweight: D2, D3 Lengths: 4-39.125", 5-38.5", 6-37.875", 7-37.25", 8-36.75", 9-36.25", PW-36", GW-35.75", SW-35.75" Dexterity: Right Hand and Left Hand Zipcore XL Irons - Steel Standard Shafts: KBS Tour Lite (R, S) Zipcore XL Irons - Steel Standard Grip: Lamkin Crossline 360 Standard 50g
Cleveland Zipcore XL Golf Irons - Steel Discover a stylish set loaded with exceptional performance - introducing the new ZipCore XL Irons in Steel, some of our most thrilling offerings to date. Distance-focused and forgiving long irons are coupled with precise short irons. It's power where you need it and control where you want it, all in one remarkable set. ZIPCORE In the 8i–SW sets, ZipCore Technology strategically positions the Center of Gravity exactly where you make contact with the ball, ensuring more consistent performance and improved forgiveness. With an abundance of high/low and heel/toe MOI, you'll experience heightened feel and control. HYDRAZIP Cleveland's exclusive dynamic blast and laser-milled line system generate surface roughness to boost friction, optimising spin for increased distance with long irons and precise control with short irons. MAINFRAME The MainFrame system in the 4i–7i consists of channels and cavities meticulously milled into the rear of ZipCore XL Iron faces, aiming to maximise flex upon impact. By enhancing COR and shifting mass for a lower CG, MainFrame generates increased ball speed, along with improved consistency and forgiveness. XL HEAD DESIGN The enlarged head has allowed Cleveland to redistribute more mass away from the center of the club, resulting in higher MOI. This increased MOI significantly enhances forgiveness, ensuring that all your shots launch high and fly straight. ACTION MASS CB A strategically positioned 8g weight inside the shaft's butt end provides improved balance, enhancing control without additional effort. This counterbalance imparts a lighter feel to the clubhead during the takeaway and assists in delivering a square face throughout your downswing. Zipcore XL Irons - Steel Specifications: Lofts: 4-20°, 5-23°, 6-26°, 7-29°, 8-33°, 9-38°, PW-43°, GW-48°, SW-54° Swingweight: D2, D3 Lengths: 4-39.125", 5-38.5", 6-37.875", 7-37.25", 8-36.75", 9-36.25", PW-36", GW-35.75", SW-35.75" Dexterity: Right Hand and Left Hand Zipcore XL Irons - Steel Standard Shafts: KBS Tour Lite (R, S) Zipcore XL Irons - Steel Standard Grip: Lamkin Crossline 360 Standard 50g
Product description is based on database from online stores. Be sure to verify all information directly with seller before purchasing.
This website uses cookies. Proceeding to use this website gives your consent for gathering and processing your data for analytic and marketing purposes.