Ronseal Ultimate Protection Decking Oil provides superior, natural looking protection, for a longer lasting finish. The unique formula penetrates deeper into the wood to provide increased durability. Providing a lightly tinted finish it will give double the weather resistance and foot traffic protection versus standard decking oils. Unique, new to... morethe market, water-based Linseed Oil technology, colours and waterproofs your deck in one easy step. Gives a more natural look to your deck and is rainproof in 90 minutes, recoat in 4 hours. Primarily for use on pre-treated decking. Preparation - Untreated, weathered decking: For untreated grey and weathered wood, use Ronseal Decking Restorer to restore the deck's natural colour and provide a sound base for application which ensures the oil penetrates effectively. Previously finished decking: Use Ronseal Decking Cleaner and Reviver to remove any dust, grease, oil, mildew, algae and other contaminants. Remove any loose, flaking or peeling coatings. To avoid patchiness, and if using a contrasting colour, make sure you remove all previous finishes using Ronseal Decking Stripper. Ensure cut ends are adequately protected using Ronseal Decking End Grain Preserver. New wood: New decking should be allowed to weather naturally (usually 6 months). This will make sure any pre-treatment has eroded allowing the stain to penetrate and adhere to the deck. Clean the deck with Ronseal Decking Cleaner and Reviver using a scrubbing brush to open the pores of the wood and remove any contamination from the manufacture of the timber. Rinse thoroughly with clean water ideally using a pressure washer. Allow to dry fully before over coating. Test effectiveness of the cleaning by splashing the deck with water. If beading occurs, re-clean. Retest before applying any oil. The shade label indicates approximate colour only. It is recommended that you test a small area to determine the final colour which may be influenced by the texture, grain, colour, porosity, type of wood and any previous treatment.This Ronseal Ultimate Protection Decking Oil has the following specification: Colour: Natural.Size: 5 litre.Additional Information:• Oil Type: Decking Oil• Size (ml): 5000
Ronseal Ultimate Protection Decking Oil provides superior, natural looking protection, for a longer lasting finish. The unique formula penetrates deeper into the wood to provide increased durability. Providing a lightly tinted finish it will give double the weather resistance and foot traffic protection versus standard decking oils. Unique, new to... morethe market, water-based Linseed Oil technology, colours and waterproofs your deck in one easy step. Gives a more natural look to your deck and is rainproof in 90 minutes, recoat in 4 hours. Primarily for use on pre-treated decking. Preparation - Untreated, weathered decking: For untreated grey and weathered wood, use Ronseal Decking Restorer to restore the deck's natural colour and provide a sound base for application which ensures the oil penetrates effectively. Previously finished decking: Use Ronseal Decking Cleaner and Reviver to remove any dust, grease, oil, mildew, algae and other contaminants. Remove any loose, flaking or peeling coatings. To avoid patchiness, and if using a contrasting colour, make sure you remove all previous finishes using Ronseal Decking Stripper. Ensure cut ends are adequately protected using Ronseal Decking End Grain Preserver. New wood: New decking should be allowed to weather naturally (usually 6 months). This will make sure any pre-treatment has eroded allowing the stain to penetrate and adhere to the deck. Clean the deck with Ronseal Decking Cleaner and Reviver using a scrubbing brush to open the pores of the wood and remove any contamination from the manufacture of the timber. Rinse thoroughly with clean water ideally using a pressure washer. Allow to dry fully before over coating. Test effectiveness of the cleaning by splashing the deck with water. If beading occurs, re-clean. Retest before applying any oil. The shade label indicates approximate colour only. It is recommended that you test a small area to determine the final colour which may be influenced by the texture, grain, colour, porosity, type of wood and any previous treatment.This Ronseal Ultimate Protection Decking Oil has the following specification: Colour: Natural.Size: 5 litre.Additional Information:• Oil Type: Decking Oil• Size (ml): 5000
Ronseal Ultimate Protection Decking Oil nourishes decking while giving it a beautiful natural finish. It’s tough against changeable weather conditions and can cope with general wear and tear. It also lasts twice as long as other decking oils.• Lasts twice as long as standard decking oils• Rainproof in 90 minutes• Protects from scuffs and scratches•... moreRestores wood oils lost through weathering• Stops wood from greying and splittingHow to use Ultimate Protection Decking OilBefore You StartThe oil works its magic on dry days when the temperature is above 10°C. Make sure your decking is completely dry before you apply it too.How to prepare decking for oilingUntreated, weathered deckingUntreated decking is really easy to prepare. All you need to do is use a restorer to bring out the natural colour of your deck. This will also help the oil adhere to the surface better.Previously treated deckingUse decking cleaner to remove dust, grease, oil, mildew and algae.If you notice any patches that are loose, peeling or flaking you will need to remove them otherwise your oil will be patchy. Use decking stripper to completely remove the top layer and take it back to the bare wood.Protect bare ends with grain protector to prevent moisture from seeping in.If your deck has been previously oiled, don't try to cover a dark oil with a lighter colour. You'll need to strip it first using our Decking Stripper.New woodMost new decks come with a bit of waterproofing protection. This could stop the oil from sticking. To avoid this, give your new deck a good scrub with our Decking Cleaner & Reviver. Alternatively, leave it to weather for six months.Rinse thoroughly with water, ideally with a pressure washer.To check if any pre-treatment is remaining, sprinkle some water on the deck and see if it beads.If it doesn't bead, you'll be ready to put on the oil. If it does then you'll have to clean it again until the water stops beading.Allow the wood to dry thoroughly before applying the oil.ApplicationGive the can a shake continuously for a couple of minutes. Pour the oil into a suitable container and dip in your brush or applicator pad. Check you’re happy with the colour. Find a small hidden patch of wood and try it. Remember, the shade label is only an indicator of the colour.Start in the furthest corner, brushing along the length of the boards. Work on 3-4 boards at a time so you don’t get any overlap marks.You’ll need to put on 2 coats. Leave 4 hours between each coat. After 24 hours you’ll be able to get your furniture out and use the deck.If you get any oil on yourself, wash it off with warm soapy water.And that’s it! Your decking is now oiled and healthy.AftercareCleaningRegularly cleaning your decking will not only keep it looking good, but it’ll keep it in a good condition too. Use a stiff brush to remove dirt, grime, dust, algae, mildew and anything else that ruins the aesthetics of your deck.RepairsRepairing your deck is really easy and
Ronseal Ultimate Protection Decking Oil is a water-based oil that protects and nourishes your decking. It penetrates deep into your wood so that it doesn't dry out, as well as protecting it from splitting and greying. This decking oil gives a long lasting defence against weather, knocks and scuffs. It is rainproof in 90 minutes and recoatable in 4 hours.
Ronseal Ultimate Protection Decking Oil nourishes decking while giving it a beautiful natural finish. It’s tough against changeable weather conditions and can cope with general wear and tear. It also lasts twice as long as other decking oils.• Lasts twice as long as standard decking oils• Rainproof in 90 minutes• Protects from scuffs and scratches• Restores wood oils lost through weathering• Stops wood from greying and splittingHow to use Ultimate Protection Decking OilBefore You StartThe oil works its magic on dry days when the temperature is above 10°C. Make sure your decking is completely dry before you apply it too.How to prepare decking for oilingUntreated, weathered deckingUntreated decking is really easy to prepare. All you need to do is use a restorer to bring out the natural colour of your deck. This will also help the oil adhere to the surface better.Previously treated deckingUse decking cleaner to remove dust, grease, oil, mildew and algae.If you notice any patches that are loose, peeling or flaking you will need to remove them otherwise your oil will be patchy. Use decking stripper to completely remove the top layer and take it back to the bare wood.Protect bare ends with grain protector to prevent moisture from seeping in.If your deck has been previously oiled, don't try to cover a dark oil with a lighter colour. You'll need to strip it first using our Decking Stripper.New woodMost new decks come with a bit of waterproofing protection. This could stop the oil from sticking. To avoid this, give your new deck a good scrub with our Decking Cleaner & Reviver. Alternatively, leave it to weather for six months.Rinse thoroughly with water, ideally with a pressure washer.To check if any pre-treatment is remaining, sprinkle some water on the deck and see if it beads.If it doesn't bead, you'll be ready to put on the oil. If it does then you'll have to clean it again until the water stops beading.Allow the wood to dry thoroughly before applying the oil.ApplicationGive the can a shake continuously for a couple of minutes. Pour the oil into a suitable container and dip in your brush or applicator pad. Check you’re happy with the colour. Find a small hidden patch of wood and try it. Remember, the shade label is only an indicator of the colour.Start in the furthest corner, brushing along the length of the boards. Work on 3-4 boards at a time so you don’t get any overlap marks.You’ll need to put on 2 coats. Leave 4 hours between each coat. After 24 hours you’ll be able to get your furniture out and use the deck.If you get any oil on yourself, wash it off with warm soapy water.And that’s it! Your decking is now oiled and healthy.AftercareCleaningRegularly cleaning your decking will not only keep it looking good, but it’ll keep it in a good condition too. Use a stiff brush to remove dirt, grime, dust, algae, mildew and anything else that ruins the aesthetics of your deck.RepairsRepairing your deck is really easy and
Product description is based on database from online stores. Be sure to verify all information directly with seller before purchasing.
This website uses cookies. Proceeding to use this website gives your consent for gathering and processing your data for analytic and marketing purposes.
