Xpelair Simply Silent Contour Timer controlled Square 150mm

To reduce noise levels Xpelair have introduced Ghost Air Movement Technology. Silent long-lasting motors are combined with highly engineered parts to remove all noise caused by mechanical parts.

The C6S benefits from a 150mm (6 inch) square fascia which is typically connected to the lighting circuit for the room, and a timer which allows the extractor to function after the fan is turned off. This is adjustable from 30 seconds to 30 minutes but must be set during installation.

A So Simple quick-fit clamp allows the extractor fan to be secured easily to panels and ceilings. Larger cable slots have been added too to enable simple wiring.

Fan alignment is maintained during installation due to the three radial screw fixing points which can be adjusted.

To top off this fantastic offer Xpelair cover the extractor with a 2 year warranty.

 

Features and Benefits:


If you require a quiet extractor for your kitchen then look no further. Ghost Air Movement Technology makes this one of the quietest during operation.
Stylish but discreet design for installation in your kitchen.
Suitable to be fitted in a wall, panel, ceiling or a window for added flexibility.
Compliant with building regulations Parts F and L.
Dual speed (selectable at install) of 60 and 69 litres per second.
Easier wiring with larger knock out sections.


Technical Data:


Electrical Power Rating: 12.9/28.4 W
Sound Pressure Level: 42.3/44.6 dbA@3m
Extract Performance: 216/248 m3/h
Specific Fan Power: 0.22/0.14 W/I/s
IPX4 Rating
Timer controlled

Extractor fans with a built-in timer control means that the fan will operate with the bathroom light switch and then overrun for a set amount of time to continue removing moisture from the air. This is great for steamy bathrooms, allowing you to turn the light off but continue with extraction for a short time. Recessed Design

Recessed fans can be installed through a wall, window or alternatively the ceiling giving you that extra bit of flexibility. Axial 

Axial type fans cause gas to flow through in an axial direction which is parallel to the shaft where the blades rotate, making the flow axial at exit and entry. Axial fans are designed to create a pressure difference and force which produces a flow through the fan. IPX4 Rating

This product has a rating of IPX4 which means it is protected from water splashes from any angle.  

Zone 1 Rated

IP rating stands for 'Ingress Protection rating' and this helps us determine what bathroom electricals can go in particular bathroom zones. An IP (Ingress Protection) number or code is used here in the UK to specify the environmental protection of enclosures around electronic equipment. These ratings are determined by specific tests.

These extractor fans can be fitted within Zone 1 as shown below.