United Kingdom

Varilight Screwless LED V-Pro Urban 1 Gang Rotary Dimmer Switch Satin JDNP

Photos - Chandelier / Lamp Varilight Screwless LED V-Pro Urban 1 Gang Rotary Dimmer Switch Satin JDNP
Varilight Screwless LED V-Pro Urban 1 Gang Rotary Dimmer Switch Satin JDNP
from £16.00 

Buy Varilight Screwless LED V-Pro Urban 1 Gang Rotary Dimmer Switch Satin JDNP

When you make a purchase through links on our site, we may earn an affiliate commission.

Varilight Screwless LED V-Pro Urban 1 Gang Rotary Dimmer Switch Satin JDNP

Although most modern dimmable LED light bulbs are now designed to work with the majority of common household dimmers, there can be some slight issues.For example, they might flicker at a certain point on the switch or there might be a slight buzzing sound when the dimmer is turned right down.This Varilight 1-Gang 2-Way Push-On/Off Rotary LED Dimmer... more1 x 0-120W (1-10 LEDs) dimmer switch has been designed specifically to be used with low loading LED light bulbs and eliminates the issues mentioned above.This state of the art dimmer switch incorporates V-Pro intelligent dimming technology, soft start feature and intelligent overload protection, adjustable minimum brightness setting and choice of driving modes.This low-profile, screwless satin faceplate features a satin knob for a sleek, contemporary style. This dimmer has a maximum LED load rating of 120w (max. 10 lamps) per gang.Dimensions: 86x86x48mmFaceplate Depth: 4mmFixing Centres: 60.3mmRecommended Back Box Depth: 35mmOperating Voltage: 230v 50HzMaximum Current Rating: 1.3ATerminal (Live) diameter: 3.2mm; Capacity: 3 x 1.5mmTerminal (Earth) diameter: 3.3mm; Capacity: 3 x 1.5mmSafety Advice: Not suitable for use with non-dimmable fluorescent bulbs and tubes, wire-wound or toroidal transformers, TRIAC dimmable loads or electric motors.
LightBulbs-direct.com
Delivery: in United Kingdom
Report
£15.72

Varilight Screwless LED V-Pro Urban 1 Gang Rotary Dimmer Switch Satin JDNP

Although most modern dimmable LED light bulbs are now designed to work with the majority of common household dimmers, there can be some slight issues.For example, they might flicker at a certain point on the switch or there might be a slight buzzing sound when the dimmer is turned right down.This Varilight 1-Gang 2-Way Push-On/Off Rotary LED Dimmer... more1 x 0-120W (1-10 LEDs) dimmer switch has been designed specifically to be used with low loading LED light bulbs and eliminates the issues mentioned above.This state of the art dimmer switch incorporates V-Pro intelligent dimming technology, soft start feature and intelligent overload protection, adjustable minimum brightness setting and choice of driving modes.This low-profile, screwless satin faceplate features a satin knob for a sleek, contemporary style. This dimmer has a maximum LED load rating of 120w (max. 10 lamps) per gang.Dimensions: 86x86x48mmFaceplate Depth: 4mmFixing Centres: 60.3mmRecommended Back Box Depth: 35mmOperating Voltage: 230v 50HzMaximum Current Rating: 1.3ATerminal (Live) diameter: 3.2mm; Capacity: 3 x 1.5mmTerminal (Earth) diameter: 3.3mm; Capacity: 3 x 1.5mmSafety Advice: Not suitable for use with non-dimmable fluorescent bulbs and tubes, wire-wound or toroidal transformers, TRIAC dimmable loads or electric motors.
SimplyLed.co.uk
Delivery: to United Kingdom
Report
£15.65

V-Pro Screwless Satin Chrome 1-Gang LED Trailing Edge Dimmer Switch 1 or 2

Standard V-Pro dimmers have a push-on/push-off switch action with rotary dimming. You can change the driving modes and adjust the minimum brightness with pushes of the dimmer control and using signals from the lamps. You can view the programming instructions on the dimmer leaflet or, alternatively, you can view Varilight video on YouTube using this... morelink:- https://www.youtube.com/watch?v=Id1E2hQpX-w . V-Pro series dimmers are designed for use with LEDs and they are also suitable for halogen and incandescent lighting, most dimmable electronic transformers and with no minimum load, are suitable for dimmable low energy lighting. The V-Pro Series, eliminates Dimmer Buzz For GLS Bulbs, GU10 Lamps, and LV Transformers Including Trailing Edge Loads and is equipped with Self Re-setting Overload Protection, so is able to handle overload situations, for example, if the wattage of the bulbs/lamps are accidentally too high on a circuit. This is achieved by the dimmer cutting out before there is any damage, (if the watts are grossly overloaded), until the load is reduced. The dimmer also contains a heat sensor which again stops damage to the dimmer, if it becomes too hot. Please adhere to maximum rating listed on the Varilight datasheets on their website or copy and paste the link for the V-Pro instruction leaflet: - http://www.varilight.co.uk/leaflets/VARILIGHT%20V-Pro%20Dimmer%20Instructions%20776.pdf .These dimmers do not work with lighting panels (LED or CFL) and are not suitable for wire-wound "toroidal" transformers. Please note that only good quality dimmable LEDs should be used. If this dimmer is purchased and the LED lamps are not compatible, the dimmer is not faulty so cannot be returned, but a better quality LED lamp/bulb should be fitted instead. Trailing and Leading Edge Dimmer, please refer to instructions provided with the dimmer, which explains all 3 dimming modes.
Debenhams.com
Delivery: in United Kingdom
Report
£26.53
Although most modern dimmable LED light bulbs are now designed to work with the majority of common household dimmers, there can be some slight issues.For example, they might flicker at a certain point on the switch or there might be a slight buzzing sound when the dimmer is turned right down.This Varilight 1-Gang 2-Way Push-On/Off Rotary LED Dimmer 1 x 0-120W (1-10 LEDs) dimmer switch has been designed specifically to be used with low loading LED light bulbs and eliminates the issues mentioned above.This state of the art dimmer switch incorporates V-Pro intelligent dimming technology, soft start feature and intelligent overload protection, adjustable minimum brightness setting and choice of driving modes.This low-profile, screwless satin faceplate features a satin knob for a sleek, contemporary style. This dimmer has a maximum LED load rating of 120w (max. 10 lamps) per gang.Dimensions: 86x86x48mmFaceplate Depth: 4mmFixing Centres: 60.3mmRecommended Back Box Depth: 35mmOperating Voltage: 230v 50HzMaximum Current Rating: 1.3ATerminal (Live) diameter: 3.2mm; Capacity: 3 x 1.5mmTerminal (Earth) diameter: 3.3mm; Capacity: 3 x 1.5mmSafety Advice: Not suitable for use with non-dimmable fluorescent bulbs and tubes, wire-wound or toroidal transformers, TRIAC dimmable loads or electric motors.
Product description is based on database from online stores. Be sure to verify all information directly with seller before purchasing.

How to place an order?How to add store?
Remember that online store is responsible for accuracy of information about price, warranty and delivery!