Sealey Jacking Beam 2 Tonne with Arm Extenders & Flat Roller Supports

• Fully certified and approved to comply with MOT requirements.• Features 2-stage mechanical safety lock and telescopic finger guards to prevent accidental injury.• Supplied with two pairs of aluminium support blocks.• Beam has spring loaded flat arms with roller bearings - when unloaded, these support the weight of the beam, allowing the entire unit to run smoothly along the pit or ramp, but when loaded, they firmly stabilise the unit.• Optional hook arms supplied.• Wide lift configuration meets MOT recommendation for lifting on jacking point.• This item is heavy. Extra assistance must be provided at the delivery point to help its safe delivery.Fully certified and approved to comply with MOT requirements. 1.6m Load arm reach. Beam Lift: 95-300mm. 2-Stage mechanical safety lock and telescopic finger guards. Spring loaded flat arms with roller bearings when unloaded, these support the weight of the beam, allowing the entire unit to run smoothly along the pit or ramp, but when loaded locate the unit firmly. Optional hook arms supplied. Supplied with two pairs of aluminium support blocks. Wide lift configuration meets MOT recommendation for lifting on jacking point.• Fully certified and approved to comply with MOT requirements. • 1.6m Load arm reach. • Beam Lift: 95-300mm. • 2-Stage mechanical safety lock and telescopic finger guards. • Spring loaded flat arms with roller bearings. • Optional hook arms supplied. • Supplied with two pairs of aluminium support blocks. • Wide lift configuration meets MOT recommendation for lifting on jacking point. • This item is heavy. Extra assistance must be provided at the delivery point to help its safe delivery. • Model No. SJBEX200Technical Specification:Beam Lift: 95-300mmCapacity: 2 TonneLoad Arm Reach: 850-1600mmNett Weight: 94kgSupport Arm Reach: 780-1075mmDimensions: Length: 490mm x Height: 345mmWeight: 109KgWarranty: 1 year