Buy Trend 342X1/4TC 342 X 1/4 Tct Bearing Guided Biscuit Jointer 4.0 X 40Mm TRE34214TC
When you make a purchase through links on our site, we may receive a affiliate commission.
Trend 342X1/4TC 342 X 1/4 Tct Bearing Guided Biscuit Jointer 4.0 X 40Mm TRE34214TC
342 Biscuit jointer set enables biscuit jointing with timber man-made fibre and particle board with the router. The set inc... moreludes three sizes of bearing to suit biscuits available. The correct choice of bearing for the biscuit being used will ensure the correct depth of cut. A step washer is supplied for use with bearings Ref B15 and B23. A slightly wider cut than the width of the biscuit is required to allow some lateral play for easy alignment during assembly.T.C.T.1/4in Shank.PTDTRE34214TC
Trend Bearing Guided Biscuit Jointer Set 342X1/4TC
For biscuit jointing of timber, man-made fibre and particle board with the router. The set includes three sizes of bearing... morewhich set the correct depth of cut for the three sizes available. A slightly longer cut than the length of the biscuit is required to allow some lateral play for easy alignment during assembly. A water based glue (PVA) is used with the biscuits which will expand as the moisture is absorbed. Boards are simply clamped together until glue is cured. For larger boards, biscuits can be doubled up by making two passes. Specifications • Shank Diameter: 1/4 • Dia Metric: 40 • Cut Length Metric: 4 • Overall Length Metric: 63.5 • Bearing Dia Metric: 15
Trend Bearing Guided Biscuit Jointer Set 40mm 4mm 1/4" 342X1/4TC
For biscuit jointing of timber, man-made fibre and particle board with the router. The set includes three sizes of bearing... morewhich set the correct depth of cut for the three sizes available. A slightly longer cut than the length of the biscuit is required to allow some lateral play for easy alignment during assembly. A water based glue (PVA) is used with the biscuits which will expand as the moisture is absorbed. Boards are simply clamped together until glue is cured. For larger boards, biscuits can be doubled up by making two passes. Specifications • Shank Diameter: 1/4 • Dia Metric: 40 • Cut Length Metric: 4 • Overall Length Metric: 63.5 • Bearing Dia Metric: 15
For biscuit jointing of timber, man-made fibre and particle board with the router. The set includes three sizes of bearing... morewhich set the correct depth of cut for the three sizes available. A slightly longer cut than the length of the biscuit is required to allow some lateral play for easy alignment during assembly. A water based glue (PVA) is used with the biscuits which will expand as the moisture is absorbed. Boards are simply clamped together until glue is cured. For larger boards, biscuits can be doubled up by making two passes. Specifications • Shank Diameter: 1/4 • Dia Metric: 40 • Cut Length Metric: 4 • Overall Length Metric: 63.5 • Bearing Dia Metric: 15
Trend Professional Two Flute Straight Router Cutter 3/42X1/4TC
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to... morecut edges. Specifications • Shank Diameter: 1/4 • Dia Metric: 7.9 • Dia Imperial: 5/16 • Cut Length Metric: 25 • Overall Length Metric: 70
Trend Professional Two Flute Straight Router Cutter 7.9mm 26mm 1/4" 3/42X1/4TC
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to... morecut edges. Specifications • Shank Diameter: 1/4 • Dia Metric: 7.9 • Dia Imperial: 5/16 • Cut Length Metric: 25 • Overall Length Metric: 70
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to... morecut edges. Specifications • Shank Diameter: 1/4 • Dia Metric: 7.9 • Dia Imperial: 5/16 • Cut Length Metric: 25 • Overall Length Metric: 70
342 Biscuit jointer set enables biscuit jointing with timber man-made fibre and particle board with the router. The set includes three sizes of bearing to suit biscuits available. The correct choice of bearing for the biscuit being used will ensure the correct depth of cut. A step washer is supplied for use with bearings Ref B15 and B23. A slightly wider cut than the width of the biscuit is required to allow some lateral play for easy alignment during assembly.T.C.T.1/4in Shank.PTDTRE34214TC
The product description is generated based on data from online stores. Before purchasing be sure to verify all information directly with the seller.
