Trend LOCK/JIG/B Adjustable Trade Lock Jig This Trend Adjustable Trade Lock Jig has adjustable sliding inserts to allow faceplate and mortise recesses for popular size door locks to be routed with a plunge router. It is quick and easy to set up using engraved lines for lock size and door sizes. It provides fast clean & accurate results on doors ev... moreen in hardwood. Deeper mortises can be achieved with a suitable size of auger bit. This lock jig is made from a Plastic laminate body with aluminium clamping bar with clamping range 30mm to 80mm. Features: Fully adjustable for lock face plate length up to 250mm. Quick and easy to set up using engraved lines for lock size and door sizes Fast clean & accurate results on doors even in hardwood Engraved for 16mm and 19mm lock width and 22.5mm and 25.4mm face plate widths Measuring required for other lock widths Engraved on underside to allow set up for 35mm 40mm 44mm and 54mm door widths Deeper mortises can be achieved with a suitable size of auger bit Plastic laminate body with aluminium clamping bar with clamping range 30mm to 80mm Comes With: 2 x setting block Specification: Door thickness min.: 30 mm Door thickness max.: 80 mm Faceplate length min.: 30 mm Faceplate length max.: 250mm Face Plate Dimension Engraved Widths: 22.5 mm and25.4 mm (1 inch) Mortise Dimension Engraved Widths: 16 mm (5/8 inch) and 19 mm (3/4 inch) PTDTSADIRTRELOCKJIGB
Trend Lock Jig for mortice locks and latches - for faceplates up to 250 long Infinitely adjustable sliding plates and stops for mortice and faceplates from 30mm up to 250mm long, ideal for use with obscure sized locks as well as all standard locks and latches. For use in a 1/2in capacity router with 80mm plunge capacity fitted with a 30mm guideb... moreush and 12mm cutter. Suitable trend cutters: 3/75X1/2TC, TR37X1/2TC, C172X1/2TC" Engraved on underside to allow fast, accurate set up for common door widths of 35mm, 40mm, 44mm and 54mm. The infinite adjustment range makes it the ideal jig for fitting the mortice positions for multi point lock strips into wooden doors. With its adaptable sliding plate and stop adjustments it can be used with different guidebush diameters and straight cutters for general mortice work in construction projects. Contents: 2 x setting block
Trend Lock Jig for mortice locks and latches - for faceplates up to 250 long Infinitely adjustable sliding plates and stops for mortice and faceplates from 30mm up to 250mm long, ideal for use with obscure sized locks as well as all standard locks and latches. For use in a 1/2in capacity router with 80mm plunge capacity fitted with a 30mm guideb... moreush and 12mm cutter. Suitable trend cutters: 3/75X1/2TC, TR37X1/2TC, C172X1/2TC" Engraved on underside to allow fast, accurate set up for common door widths of 35mm, 40mm, 44mm and 54mm. The infinite adjustment range makes it the ideal jig for fitting the mortice positions for multi point lock strips into wooden doors. With its adaptable sliding plate and stop adjustments it can be used with different guidebush diameters and straight cutters for general mortice work in construction projects. Contents: 2 x setting block
Trend LOCK/JIG/B Adjustable Trade Lock Jig This Trend Adjustable Trade Lock Jig has adjustable sliding inserts to allow faceplate and mortise recesses for popular size door locks to be routed with a plunge router. It is quick and easy to set up using engraved lines for lock size and door sizes. It provides fast clean & accurate results on doors even in hardwood. Deeper mortises can be achieved with a suitable size of auger bit. This lock jig is made from a Plastic laminate body with aluminium clamping bar with clamping range 30mm to 80mm. Features: Fully adjustable for lock face plate length up to 250mm. Quick and easy to set up using engraved lines for lock size and door sizes Fast clean & accurate results on doors even in hardwood Engraved for 16mm and 19mm lock width and 22.5mm and 25.4mm face plate widths Measuring required for other lock widths Engraved on underside to allow set up for 35mm 40mm 44mm and 54mm door widths Deeper mortises can be achieved with a suitable size of auger bit Plastic laminate body with aluminium clamping bar with clamping range 30mm to 80mm Comes With: 2 x setting block Specification: Door thickness min.: 30 mm Door thickness max.: 80 mm Faceplate length min.: 30 mm Faceplate length max.: 250mm Face Plate Dimension Engraved Widths: 22.5 mm and25.4 mm (1 inch) Mortise Dimension Engraved Widths: 16 mm (5/8 inch) and 19 mm (3/4 inch) PTDTSADIRTRELOCKJIGB
The product description is generated based on data from online stores. Before purchasing be sure to verify all information directly with the seller.
