When you make a purchase through links on our site, we may receive a affiliate commission.
Everbuild Stick 2 All Purpose Adhesive 30Ml 489510
Everbuild Stick 2 All Purpose Clear Adhesive Is A Strong Clear Quick Drying Adhesive Suitable For A Variety Of Household Re... morepairs Hobbies And General Use. Stick 2 Adhesive Will Stick Ceramic Porcelain Wood Card Paper Most Plastics Leather Cork Linoleum Rubber Stone Glass Metals And Dense Fabrics. Although Stick 2 All Purpose Adhesive Is Quick Drying And Provides A Strong Hold Items Can Be Repositioned For Up To 5 Minutes After Application If Required.PTDSIKDIRS2CLEAR
Everbuild STICK2® All-Purpose Clear Adhesive is a strong clear quick drying adhesive suitable for a variety of househol... mored repairs and hobby uses. Will stick ceramics porcelain pottery wood card paper most plastics leather cork linoleum rubber stone glass metals and dense fabrics to both themselves and each other. Always open and use this product over a protected work surface. Surfaces to be bonded must be clean dry and free from dust. Use only in well ventilated areas. Do not breathe vapour. POROUS SURFACES (fabrics ceramics etc.) Unscrew cap and spread a thin even layer of adhesive onto one surface. Press two surfaces together firmly. NON-POROUS SURFACES (plastics metals etc.) Improve adhesion by abrading both surfaces with sandpaper. Unscrew cap and spread a thin even layer of adhesive onto both surfaces. Allow adhesive to dry to a tough tacky finish (about 5-10 mins) then press both surfaces together firmly.In both cases full strength is obtained after 24 hours at 20°CReplace cap immediately after use to keep adhesive usable.PTDEVBS2CLEAR
Everbuild Stick 2 All Purpose Adhesive Tube EVBS2CLEAR
Everbuild STICK2® All-Purpose Clear Adhesive is a strong, clear, quick drying adhesive suitable for a variety of househol... mored repairs and hobby uses. Will stick ceramics, porcelain, pottery, wood, card, paper, most plastics, leather, cork, linoleum, rubber, stone, glass, metals and dense fabrics to both themselves and each other. Always open and use this product over a protected work surface. Surfaces to be bonded must be clean, dry and free from dust. Use only in well ventilated areas. Do not breathe vapour. POROUS SURFACES (fabrics, ceramics etc.) Unscrew cap and spread a thin even layer of adhesive onto one surface. Press two surfaces together firmly. NON-POROUS SURFACES (plastics, metals etc.) Improve adhesion by abrading both surfaces with sandpaper. Unscrew cap and spread a thin even layer of adhesive onto both surfaces. Allow adhesive to dry to a tough tacky finish (about 5-10 mins) then press both surfaces together firmly.In both cases, full strength is obtained after 24 hours at 20°CReplace cap immediately after use to keep adhesive usable.Additional Information:• Glue Type: All-Purpose• Size (ml): 30
Everbuild STICK2® All-Purpose Clear Adhesive is a strong, clear, quick drying adhesive suitable for a variety of househol... mored repairs and hobby uses. Will stick ceramics, porcelain, pottery, wood, card, paper, most plastics, leather, cork, linoleum, rubber, stone, glass, metals and dense fabrics to both themselves and each other. Always open and use this product over a protected work surface. Surfaces to be bonded must be clean, dry and free from dust. Use only in well ventilated areas. Do not breathe vapour. POROUS SURFACES (fabrics, ceramics etc.) Unscrew cap and spread a thin even layer of adhesive onto one surface. Press two surfaces together firmly. NON-POROUS SURFACES (plastics, metals etc.) Improve adhesion by abrading both surfaces with sandpaper. Unscrew cap and spread a thin even layer of adhesive onto both surfaces. Allow adhesive to dry to a tough tacky finish (about 5-10 mins) then press both surfaces together firmly.In both cases, full strength is obtained after 24 hours at 20°CReplace cap immediately after use to keep adhesive usable.Additional Information:• Glue Type: All-Purpose• Size (ml): 30
Everbuild STICK2® All-Purpose Clear Adhesive is a strong clear quick drying adhesive suitable for a variety of household repairs and hobby uses. Will stick ceramics porcelain pottery wood card paper most plastics leather cork linoleum rubber stone glass metals and dense fabrics to both themselves and each other. Always open and use this product over a protected work surface. Surfaces to be bonded must be clean dry and free from dust. Use only in well ventilated areas. Do not breathe vapour. POROUS SURFACES (fabrics ceramics etc.) Unscrew cap and spread a thin even layer of adhesive onto one surface. Press two surfaces together firmly. NON-POROUS SURFACES (plastics metals etc.) Improve adhesion by abrading both surfaces with sandpaper. Unscrew cap and spread a thin even layer of adhesive onto both surfaces. Allow adhesive to dry to a tough tacky finish (about 5-10 mins) then press both surfaces together firmly.In both cases full strength is obtained after 24 hours at 20°CReplace cap immediately after use to keep adhesive usable.PTDEVBS2CLEAR
The product description is generated based on data from online stores. Before purchasing be sure to verify all information directly with the seller.
