Buy Sealey Single Post Hydraulic Motorcycle Lift 450kg Capacity
When you make a purchase through links on our site, we may earn an affiliate commission.
Sealey Single Post Hydraulic Motorcycle Lift 450Kg MCL500
Space-saving design maximizes garage working area. With a low minimum height of 65mm (without frame supports), it will lift a... morend support the bike through to a maximum height of 740mm (840mm with frame supports). Lockable in 2-positions for supporting the motorcycle over extended periods. Unlike most other motorcycle lifts, it is possible to remove both wheels, front forks, steering assembly, rear swing arm and suspension units as well as the engine. This lift benefits from being portable, so can be used anywhere with a hard level floor, making it suitable for mobile motorcycle mechanics. Ideal for use with the Sealey range of wheel chocks to assist supporting the motorcycle, whilst adjusting the frame supports and securing to the lift. Features and Benefits • Space-saving design maximizes the space in the garage or workshop. • Two locking positions for supporting the motorcycle over extended periods on the lift. • With this lift it is possible to remove both wheels, front forks, steering assembly, rear swing arm and suspension units as well as the engine. • Benefits from being portable and can be used anywhere with a hard level floor, making this suitable for mobile motorcycle mechanics. • Ideal for use with the Sealey range of wheel chocks to assist supporting the motorcycle, whilst adjusting the frame supports and securing to the lift. • Min./Max. Lift Height (without Frame Supports): 65-740mm. • Min./Max. Lift Height (with Frame Supports): 165-840mm. • Frame Height: 920mm. • Maximum Frame Width: 980mm. • Model No. MCL500 Specifications Model No MCL500 Brand: Sealey Nett Weight: 49.98kg Capacity: 450kg Min./Max. Lift Height (without Frame Supports): 65-740mm Min./Max. Lift Height (with Frame Supports): 165-840mm Frame Height: 920mm Maximum Frame Width: 980mm
Sealey Single Post Hydraulic Motorcycle Lift 450Kg MCL500
Space-saving design maximizes garage working area. With a low minimum height of 65mm (without frame supports), it will lift a... morend support the bike through to a maximum height of 740mm (840mm with frame supports). Lockable in 2-positions for supporting the motorcycle over extended periods. Unlike most other motorcycle lifts, it is possible to remove both wheels, front forks, steering assembly, rear swing arm and suspension units as well as the engine. This lift benefits from being portable, so can be used anywhere with a hard level floor, making it suitable for mobile motorcycle mechanics. Ideal for use with the Sealey range of wheel chocks to assist supporting the motorcycle, whilst adjusting the frame supports and securing to the lift. Features and Benefits • Space-saving design maximizes the space in the garage or workshop. • Two locking positions for supporting the motorcycle over extended periods on the lift. • With this lift it is possible to remove both wheels, front forks, steering assembly, rear swing arm and suspension units as well as the engine. • Benefits from being portable and can be used anywhere with a hard level floor, making this suitable for mobile motorcycle mechanics. • Ideal for use with the Sealey range of wheel chocks to assist supporting the motorcycle, whilst adjusting the frame supports and securing to the lift. • Min./Max. Lift Height (without Frame Supports): 65-740mm. • Min./Max. Lift Height (with Frame Supports): 165-840mm. • Frame Height: 920mm. • Maximum Frame Width: 980mm. • Model No. MCL500 Specifications Model No MCL500 Brand: Sealey Nett Weight: 49.98kg Capacity: 450kg Min./Max. Lift Height (without Frame Supports): 65-740mm Min./Max. Lift Height (with Frame Supports): 165-840mm Frame Height: 920mm Maximum Frame Width: 980mm
Space saving design maximizes garage working area. With a low minimum height of 65mm (without frame supports), it will lift a... morend support the bike through to a maximum height of 740mm (840mm with frame supports). Lockable in 2-positions for supporting the motorcycle over extended periods. Unlike most other motorcycle lifts, it is possible to remove both wheels, front forks, steering assembly, rear swing arm and suspension units as well as the engine. This lift also benefits from being portable and can be used anywhere with a hard level floor, making this suitable for mobile motorcycle mechanics. Ideal for use with the Sealey range of wheel chocks to assist supporting the motorcycle, whilst adjusting the frame supports and securing to the lift.
Sealey MCL500 Single Post Motorcycle Lift 450kg Capacity
Space-saving design maximizes garage working area. With a low minimum height of 65mm (without frame supports), it will lift a... morend support the bike through to a maximum height of 740mm (840mm with frame supports). Lockable in 2-positions for supporting the motorcycle over extended periods. Unlike most other motorcycle lifts, it is possible to remove both wheels, front forks, steering assembly, rear swing arm and suspension units as well as the engine. This lift benefits from being portable, so can be used anywhere with a hard level floor, making it suitable for mobile motorcycle mechanics. Ideal for use with the Sealey range of wheel chocks to assist supporting the motorcycle, whilst adjusting the frame supports and securing to the lift.Specifications:Model No MCL500Brand: SealeyNett Weight: 49.98kgCapacity: 450kgMin./Max. Lift Height (without Frame Supports): 65/740mmMin./Max. Lift Height (with Frame Supports): 165/840mmFrame Height: 920mmMaximum Frame Width: 980mm
Sealey Single Post Hydraulic Motorcycle Lift 450kg Capacity
• Space-saving design maximizes the space in the garage or workshop.• Two locking positions for supporting the motorcycle ove... morer extended periods on the lift.• With this lift it is possible to remove both wheels, front forks, steering assembly, rear swing arm and suspension units as well as the engine.• Benefits from being portable and can be used anywhere with a hard level floor, thus making this suitable for mobile motorcycle mechanics.• Ideal for use with the Sealey range of wheel chocks to assist supporting the motorcycle, whilst adjusting the frame supports and securing to the lift.• Min./Max. Lift Height (without Frame Supports): 65/740mm.• Min./Max. Lift Height (with Frame Supports): 165/840mm.• Frame Height: 920mm.• Maximum Frame Width: 980mm.Space-saving design maximizes garage working area. With a low minimum height of 65mm (without frame supports), it will lift and support the bike through to a maximum height of 740mm (840mm with frame supports). Lockable in 2-positions for supporting the motorcycle over extended periods. Unlike most other motorcycle lifts, it is possible to remove both wheels, front forks, steering assembly, rear swing arm and suspension units as well as the engine. This lift also benefits from being portable and can be used anywhere with a hard level floor, making this suitable for mobile motorcycle mechanics. Ideal for use with the Sealey range of wheel chocks to assist supporting the motorcycle, whilst adjusting the frame supports and securing to the lift.• Space-saving design maximizes the space in the garage or workshop. • Two locking positions for supporting the motorcycle overextended periods on the lift. • With this lift it is possible to remove both wheels, front forks, steering assembly, rear swing arm and suspension units as well as the engine. • Benefits from being portable and can be used anywhere with a hard level floor, thus making this suitable for mobile motorcycle mechanics. • Ideal for use with the Sealey range of wheel chocks to assist supporting the motorcycle, whilst adjusting the frame supports and securing to the lift. • Min./Max. Lift Height (without Frame Supports): 65/740mm. • Min./Max. Lift Height (with Frame Supports): 165/840mm. • Frame Height: 920mm. • Maximum Frame Width: 980mm. • Model No. MCL500Technical Specification:Nett Weight: 49.98kgCapacity: 450kgMin./Max. Lift Height (without Frame Supports): 65/740mmMin./Max. Lift Height (with Frame Supports): 165/840mmFrame Height: 920mmMaximum Frame Width: 980mmDimensions: Length: 660mm x Height: 350mmWeight: 53.6KgWarranty: 1 year
• Space-saving design maximizes the space in the garage or workshop.• Two locking positions for supporting the motorcycle over extended periods on the lift.• With this lift it is possible to remove both wheels, front forks, steering assembly, rear swing arm and suspension units as well as the engine.• Benefits from being portable and can be used anywhere with a hard level floor, thus making this suitable for mobile motorcycle mechanics.• Ideal for use with the Sealey range of wheel chocks to assist supporting the motorcycle, whilst adjusting the frame supports and securing to the lift.• Min./Max. Lift Height (without Frame Supports): 65/740mm.• Min./Max. Lift Height (with Frame Supports): 165/840mm.• Frame Height: 920mm.• Maximum Frame Width: 980mm.Space-saving design maximizes garage working area. With a low minimum height of 65mm (without frame supports), it will lift and support the bike through to a maximum height of 740mm (840mm with frame supports). Lockable in 2-positions for supporting the motorcycle over extended periods. Unlike most other motorcycle lifts, it is possible to remove both wheels, front forks, steering assembly, rear swing arm and suspension units as well as the engine. This lift also benefits from being portable and can be used anywhere with a hard level floor, making this suitable for mobile motorcycle mechanics. Ideal for use with the Sealey range of wheel chocks to assist supporting the motorcycle, whilst adjusting the frame supports and securing to the lift.• Space-saving design maximizes the space in the garage or workshop. • Two locking positions for supporting the motorcycle overextended periods on the lift. • With this lift it is possible to remove both wheels, front forks, steering assembly, rear swing arm and suspension units as well as the engine. • Benefits from being portable and can be used anywhere with a hard level floor, thus making this suitable for mobile motorcycle mechanics. • Ideal for use with the Sealey range of wheel chocks to assist supporting the motorcycle, whilst adjusting the frame supports and securing to the lift. • Min./Max. Lift Height (without Frame Supports): 65/740mm. • Min./Max. Lift Height (with Frame Supports): 165/840mm. • Frame Height: 920mm. • Maximum Frame Width: 980mm. • Model No. MCL500Technical Specification:Nett Weight: 49.98kgCapacity: 450kgMin./Max. Lift Height (without Frame Supports): 65/740mmMin./Max. Lift Height (with Frame Supports): 165/840mmFrame Height: 920mmMaximum Frame Width: 980mmDimensions: Length: 660mm x Height: 350mmWeight: 53.6KgWarranty: 1 year
Product description is based on database from online stores. Be sure to verify all information directly with seller before purchasing.
This website uses cookies. Proceeding to use this website gives your consent for gathering and processing your data for analytic and marketing purposes.