Fully electronic, microprocessor controlled battery starter/charger designed to meet the requirements of modern battery techn... moreology. Suitable for EFB and AGM/GEL (stop/start), Lead Acid, Lead Calcium and Silver Calcium batteries found on electric and hybrid vehicles. Features up to ten analysis and charge phases, including trickle/maintenance and suitable for 12V and 24V electrical systems. Instant visual check of battery condition, charge current, voltage and charging rate via LED read-out. Stabilised charging current allows improved charging efficiency and reduced charging times using ECS (Electronic Control Systems) technology. Includes circuitry to provide surge and spike protection during charging and starting, preventing damage to vital systems such as ABS, airbag sensors, ignition and music systems. Features power supply mode, providing support for the battery to prevent it from being drained during prolonged electronic diagnostic checks and software updates. Features: • SUITABLE FOR MOST BATTERY TYPES - Suitable for EFB and AGM/GEL (stop/start), Lead Acid, Lead Calcium and Silver Calcium batteries • WIDE BATTEY RANGE - Battery Range: 4-550Ah • TEN CHARGE PHASES - Up to ten analysis and charge phases, including trickle/maintenance • EFFICEINT AND FAST - Stabilised charging current allows improved charging efficiency and reduced charging times using ECS (Electronic Control Systems) technology • SAFETY FEATURES - Safety features include surge and spike protection during charging and starting • BATTERY SUPPORT UNIT - BSU mode provides support for the battery during prolonged electronic diagnostic checks • 2 YEAR GUARANTEE* Specifications: Guarantee:2 Years Model Number: ECS400
Fully electronic microprocessor controlled battery starter/charger designed to meet the requirements of modern battery techn... moreology. Suitable for EFB and AGM/GEL (stop/start) Lead Acid Lead Calcium and Silver Calcium batteries found on electric and hybrid vehicles. Features up to ten analysis and charge phases including trickle/maintenance and suitable for 12V and 24V electrical systems. Instant visual check of battery condition charge current voltage and charging rate via LED read-out. Stabilised charging current allows improved charging efficiency and reduced charging times using ECS (Electronic Control Systems) technology. Includes circuitry to provide surge and spike protection during charging and starting preventing damage to vital systems such as ABS airbag sensors ignition and music systems. Features power supply mode providing support for the battery to prevent it from being drained during prolonged electronic diagnostic checks and software updates.400/75A 12/24V Electronic Starter/Charger/Maintainer• Suitable for 12V and 24V electrical systems. • Fully electronic microprocessor controlled.• Suitable for EFB and AGM/GEL (stop/start) Lead Acid Lead Calcium and Silver Calcium batteries.• Battery Range: 4-550Ah.• Up to 10 analysis and charge phases including trickle/maintenance.• Stabilised charging current allows improved charging efficiency and reduced charging times using ECS (Electronic Control Systems) technology.• Surge and spike protection during charging and starting.• BSU mode provides support for the battery during prolonged electronic diagnostic checks.• 2 Year guarantee*.• Model No. ECS400Model No: ECS400:Brand: Sealey:Cable & Clamp Length: 2m:Nett Weight: 24.5kg:Output: 12/24V:Output Charge Peak(EN): 75A(50A):Output Start Peak(EN)*: 400A(300A):Battery Range: 4-550Ah:Input Charge: 1.5kW - 6.5A:Input Start: 10kW - 43A:Charging Rates: 3 x Preset + 1 x Variable to Maximum Current:Supply: 230V - 32A:BSU Supply: 30A - 13.5V:Polarity Protection: Fuse (2 x 100A):Fuse: 120/802131 (Pack of 10)PTDSEAECS400
Sealey ECS400 Fully Electronic Vehicle Battery Starter and Charger
The Sealey ECS400 is a professional battery starter and charger engineered for modern vehicle requirements, combining fully e... morelectronic microprocessor control with advanced charging technology. Designed to handle the sophisticated battery systems found in today's vehicles, this unit delivers versatile performance across both 12V and 24V electrical systems. This advanced charger supports the full spectrum of contemporary battery technologies, including EFB and AGM/GEL batteries used in stop/start systems, plus Lead Acid, Lead Calcium and Silver Calcium batteries common in electric and hybrid vehicles. The intelligent ten-phase charging system incorporates analysis, optimisation and trickle/maintenance modes to ensure optimal battery condition. ECS (Electronic Control Systems) technology provides stabilised charging current for improved efficiency and reduced charging times, whilst the LED read-out delivers instant visual feedback on battery condition, charge current, voltage and charging rate. Critical electronic systems receive comprehensive protection through integrated surge and spike circuitry, safeguarding vital components including ABS, airbag sensors, ignition and music systems during both charging and starting operations. The dedicated BSU (Battery Support Unit) mode maintains power supply during extended diagnostic procedures and software updates, preventing battery drain when workshop equipment is connected to the vehicle. With a battery range capacity of 4-550Ah and output starting peak of 400A (300A EN), this charger handles everything from compact cars to commercial vehicles. Features and Benefits: • Microprocessor control delivers intelligent charging across multiple battery technologies • Ten-phase charging system including analysis and maintenance modes • BSU mode supports battery during diagnostic checks and software updates • Surge and spike protection prevents damage to sensitive vehicle electronics • Stabilised charging current improves efficiency and reduces charging times • LED read-out provides instant battery status information • Handles both 12V and 24V systems with battery range of 4-550Ah • 2m cable and clamp length for workshop flexibility Specifications: • Brand: Sealey • Cable & Clamp Length: 2m • Nett Weight: 24.5kg • Output: 12/24V • Output Charge Peak(EN): 75A(50A) • Output Start Peak(EN)*: 400A(300A) • Battery Range: 4-550Ah • Input Charge: 1.5kW - 6.5A • Input Start: 10kW - 43A • Charging Rates: 3 x Preset + 1 x Variable to Maximum Current • Supply: 230V - 32A • BSU Supply: 30A - 13.5V • Polarity Protection: Fuse (2 x 100A) • Fuse: 120/802131 (Pack of 10), 120/122452 (single) • Note: *Performance dependent on connection to an adequate, good clean electric supply
Sealey ECS400 Fully Electronic Vehicle Battery Starter and Charger 12v or 24v
The Sealey ECS400 is a professional battery starter and charger engineered for modern vehicle requirements, combining fully e... morelectronic microprocessor control with advanced charging technology. Designed to handle the sophisticated battery systems found in today's vehicles, this unit delivers versatile performance across both 12V and 24V electrical systems. This advanced charger supports the full spectrum of contemporary battery technologies, including EFB and AGM/GEL batteries used in stop/start systems, plus Lead Acid, Lead Calcium and Silver Calcium batteries common in electric and hybrid vehicles. The intelligent ten-phase charging system incorporates analysis, optimisation and trickle/maintenance modes to ensure optimal battery condition. ECS (Electronic Control Systems) technology provides stabilised charging current for improved efficiency and reduced charging times, whilst the LED read-out delivers instant visual feedback on battery condition, charge current, voltage and charging rate. Critical electronic systems receive comprehensive protection through integrated surge and spike circuitry, safeguarding vital components including ABS, airbag sensors, ignition and music systems during both charging and starting operations. The dedicated BSU (Battery Support Unit) mode maintains power supply during extended diagnostic procedures and software updates, preventing battery drain when workshop equipment is connected to the vehicle. With a battery range capacity of 4-550Ah and output starting peak of 400A (300A EN), this charger handles everything from compact cars to commercial vehicles. Features and Benefits: • Microprocessor control delivers intelligent charging across multiple battery technologies • Ten-phase charging system including analysis and maintenance modes • BSU mode supports battery during diagnostic checks and software updates • Surge and spike protection prevents damage to sensitive vehicle electronics • Stabilised charging current improves efficiency and reduces charging times • LED read-out provides instant battery status information • Handles both 12V and 24V systems with battery range of 4-550Ah • 2m cable and clamp length for workshop flexibility Specifications: • Brand: Sealey • Cable & Clamp Length: 2m • Nett Weight: 24.5kg • Output: 12/24V • Output Charge Peak(EN): 75A(50A) • Output Start Peak(EN)*: 400A(300A) • Battery Range: 4-550Ah • Input Charge: 1.5kW - 6.5A • Input Start: 10kW - 43A • Charging Rates: 3 x Preset + 1 x Variable to Maximum Current • Supply: 230V - 32A • BSU Supply: 30A - 13.5V • Polarity Protection: Fuse (2 x 100A) • Fuse: 120/802131 (Pack of 10), 120/122452 (single) • Note: *Performance dependent on connection to an adequate, good clean electric supply
The Sealey ECS400 is a professional battery starter and charger engineered for modern vehicle requirements, combining fully e... morelectronic microprocessor control with advanced charging technology. Designed to handle the sophisticated battery systems found in today's vehicles, this unit delivers versatile performance across both 12V and 24V electrical systems. This advanced charger supports the full spectrum of contemporary battery technologies, including EFB and AGM/GEL batteries used in stop/start systems, plus Lead Acid, Lead Calcium and Silver Calcium batteries common in electric and hybrid vehicles. The intelligent ten-phase charging system incorporates analysis, optimisation and trickle/maintenance modes to ensure optimal battery condition. ECS (Electronic Control Systems) technology provides stabilised charging current for improved efficiency and reduced charging times, whilst the LED read-out delivers instant visual feedback on battery condition, charge current, voltage and charging rate. Critical electronic systems receive comprehensive protection through integrated surge and spike circuitry, safeguarding vital components including ABS, airbag sensors, ignition and music systems during both charging and starting operations. The dedicated BSU (Battery Support Unit) mode maintains power supply during extended diagnostic procedures and software updates, preventing battery drain when workshop equipment is connected to the vehicle. With a battery range capacity of 4-550Ah and output starting peak of 400A (300A EN), this charger handles everything from compact cars to commercial vehicles. Features and Benefits: • Microprocessor control delivers intelligent charging across multiple battery technologies • Ten-phase charging system including analysis and maintenance modes • BSU mode supports battery during diagnostic checks and software updates • Surge and spike protection prevents damage to sensitive vehicle electronics • Stabilised charging current improves efficiency and reduces charging times • LED read-out provides instant battery status information • Handles both 12V and 24V systems with battery range of 4-550Ah • 2m cable and clamp length for workshop flexibility Specifications: • Brand: Sealey • Cable & Clamp Length: 2m • Nett Weight: 24.5kg • Output: 12/24V • Output Charge Peak(EN): 75A(50A) • Output Start Peak(EN)*: 400A(300A) • Battery Range: 4-550Ah • Input Charge: 1.5kW - 6.5A • Input Start: 10kW - 43A • Charging Rates: 3 x Preset + 1 x Variable to Maximum Current • Supply: 230V - 32A • BSU Supply: 30A - 13.5V • Polarity Protection: Fuse (2 x 100A) • Fuse: 120/802131 (Pack of 10), 120/122452 (single) • Note: *Performance dependent on connection to an adequate, good clean electric supply
Fully electronic, microprocessor controlled battery starter/charger designed to meet the requirements of modern battery technology. Suitable for EFB and AGM/GEL (stop/start), Lead Acid, Lead Calcium and Silver Calcium batteries found on electric and hybrid vehicles. Features up to ten analysis and charge phases, including trickle/maintenance and suitable for 12V and 24V electrical systems. Instant visual check of battery condition, charge current, voltage and charging rate via LED read-out. Stabilised charging current allows improved charging efficiency and reduced charging times using ECS (Electronic Control Systems) technology. Includes circuitry to provide surge and spike protection during charging and starting, preventing damage to vital systems such as ABS, airbag sensors, ignition and music systems. Features power supply mode, providing support for the battery to prevent it from being drained during prolonged electronic diagnostic checks and software updates. Features: • SUITABLE FOR MOST BATTERY TYPES - Suitable for EFB and AGM/GEL (stop/start), Lead Acid, Lead Calcium and Silver Calcium batteries • WIDE BATTEY RANGE - Battery Range: 4-550Ah • TEN CHARGE PHASES - Up to ten analysis and charge phases, including trickle/maintenance • EFFICEINT AND FAST - Stabilised charging current allows improved charging efficiency and reduced charging times using ECS (Electronic Control Systems) technology • SAFETY FEATURES - Safety features include surge and spike protection during charging and starting • BATTERY SUPPORT UNIT - BSU mode provides support for the battery during prolonged electronic diagnostic checks • 2 YEAR GUARANTEE* Specifications: Guarantee:2 Years Model Number: ECS400
The product description is generated based on data from online stores. Before purchasing be sure to verify all information directly with the seller.
