Buy Draper Expert Universal Pressure Test Kit (15 Piece) 21439
When you make a purchase through links on our site, we may earn an affiliate commission.
Draper Expert Universal Pressure Test Kit (15 Piece) 21439
Designed to test and measure the pressure in vehicle cooling systems via the radiator or expansion tank and intended for trad... moree use Features: A capless tester, it uses a cone adaptor system to seal and pressurise the cooling system Cone adaptors may be used to replace both screw and bayonet-type cap fittings The kit includes a pump with gauge and release pin for depressurisation prior to detachment, four system adaptors and ten radiator cap testing adaptors for use on a wide range of vehicle applications Supplied in a sturdy, blow-moulded plastic case Specifications: Dimensions: H:46.5 x W:11.0 x D:41.0 cm Colour: Blue Guarantee:Lifetime Material: Metal Model Number: 21439
Draper 21439 Draper Expert Universal Pressure Test Kit (15 Piece)
This universal pressure test kit is designed to test and measure the pressure in vehicle cooling systems via the radiator or... moreexpansion tank and is intended for trade use. A capless tester, it uses a cone adaptor system to seal and pressurise the cooling system. Cone adaptors may be used to replace both screw and bayonet-type cap fittings. The kit includes a hand pump with a gauge to enable simple, easily controlled testing, with a release pin for depressurisation prior to detachment. There are also four universal cone adaptors and ten radiator cap testing adaptors for use on a wide range of vehicles. The kit is supplied in a sturdy, blow-moulded plastic case.Contents:1 x Pump with gauge 4 x Cone adaptors: 17-24, 28-31.5, 37-39.5, 47-48.5mm 1 x Radiator cap adaptor 21: Ford (after 2010) pressure caps 1 x Radiator cap adaptor 22: Toyota and Honda pressure caps 1 x Radiator cap adaptor 23: Mitsubishi, Ford, Nissan and Mazda pressure caps 1 x Radiator cap adaptor 24: Nippon and Hino pressure caps 1 x Radiator cap adaptor 25: Renault and Audi/VW pressure caps 1 x Radiator cap adaptor 26: Volvo, Citroen, Renault, Fiat and Peugeot pressure caps 1 x Radiator cap adaptor 27: Opel, VW and Ford pressure caps 1 x Radiator cap adaptor 28: Volvo and Renault pressure caps 1 x Radiator cap adaptor 29: BMW pressure caps 1 x Radiator cap adaptor 30: Mercedes-Benz pressure caps Supplied in a blow-moulded plastic caseDesigned to test and measure the pressure in vehicle cooling systems via the radiator or expansion tank and intended for trade useA capless tester, it uses a cone adaptor system to seal and pressurise the cooling systemCone adaptors may be used to replace both screw and bayonet-type cap fittingsThe kit includes a pump with gauge and release pin for depressurisation prior to detachment, four system adaptors and ten radiator cap testing adaptors for use on a wide range of vehicle applicationsSupplied in a sturdy, blow-moulded plastic case
Draper Expert 15 Piece Universal Pressure Test Kit URPTK-2
This universal pressure test kit is designed to test and measure the pressure in vehicle cooling systems via the radiator or... moreexpansion tank and is intended for trade use. A capless tester, it uses a cone adaptor system to seal and pressurise the cooling system. Cone adaptors may be used to replace both screw and bayonet-type cap fittings. The kit includes a hand pump with a gauge to enable simple, easily controlled testing, with a release pin for depressurisation prior to detachment. There are also four universal cone adaptors and ten radiator cap testing adaptors for use on a wide range of vehicles. The kit is supplied in a sturdy, blow-moulded plastic case. Features and Benefits • Designed to test and measure the pressure in vehicle cooling systems via the radiator or expansion tank and intended for trade use • A capless tester, it uses a cone adaptor system to seal and pressurise the cooling system • Cone adaptors may be used to replace both screw and bayonet-type cap fittings • The kit includes a pump with gauge and release pin for depressurisation prior to detachment, four system adaptors and ten radiator cap testing adaptors for use on a wide range of vehicle applications • Supplied in a sturdy, blow-moulded plastic case Contents 1 x Pump with gauge 4 x Cone adaptors: 17-24, 28-31.5, 37-39.5, 47-48.5mm 1 x Radiator cap adaptor 21: Ford (after 2010) pressure caps 1 x Radiator cap adaptor 22: Toyota and Honda pressure caps 1 x Radiator cap adaptor 23: Mitsubishi, Ford, Nissan and Mazda pressure caps 1 x Radiator cap adaptor 24: Nippon and Hino pressure caps 1 x Radiator cap adaptor 25: Renault and Audi/VW pressure caps 1 x Radiator cap adaptor 26: Volvo, Citroen, Renault, Fiat and Peugeot pressure caps 1 x Radiator cap adaptor 27: Opel, VW and Ford pressure caps 1 x Radiator cap adaptor 28: Volvo and Renault pressure caps 1 x Radiator cap adaptor 29: BMW pressure caps 1 x Radiator cap adaptor 30: Mercedes-Benz pressure caps Supplied in a blow-moulded plastic case
This universal pressure test kit is designed to test and measure the pressure in vehicle cooling systems via the radiator or... moreexpansion tank and is intended for trade use. A capless tester, it uses a cone adaptor system to seal and pressurise the cooling system. Cone adaptors may be used to replace both screw and bayonet-type cap fittings. The kit includes a hand pump with a gauge to enable simple, easily controlled testing, with a release pin for depressurisation prior to detachment. There are also four universal cone adaptors and ten radiator cap testing adaptors for use on a wide range of vehicles. The kit is supplied in a sturdy, blow-moulded plastic case. Features and Benefits • Designed to test and measure the pressure in vehicle cooling systems via the radiator or expansion tank and intended for trade use • A capless tester, it uses a cone adaptor system to seal and pressurise the cooling system • Cone adaptors may be used to replace both screw and bayonet-type cap fittings • The kit includes a pump with gauge and release pin for depressurisation prior to detachment, four system adaptors and ten radiator cap testing adaptors for use on a wide range of vehicle applications • Supplied in a sturdy, blow-moulded plastic case Contents 1 x Pump with gauge 4 x Cone adaptors: 17-24, 28-31.5, 37-39.5, 47-48.5mm 1 x Radiator cap adaptor 21: Ford (after 2010) pressure caps 1 x Radiator cap adaptor 22: Toyota and Honda pressure caps 1 x Radiator cap adaptor 23: Mitsubishi, Ford, Nissan and Mazda pressure caps 1 x Radiator cap adaptor 24: Nippon and Hino pressure caps 1 x Radiator cap adaptor 25: Renault and Audi/VW pressure caps 1 x Radiator cap adaptor 26: Volvo, Citroen, Renault, Fiat and Peugeot pressure caps 1 x Radiator cap adaptor 27: Opel, VW and Ford pressure caps 1 x Radiator cap adaptor 28: Volvo and Renault pressure caps 1 x Radiator cap adaptor 29: BMW pressure caps 1 x Radiator cap adaptor 30: Mercedes-Benz pressure caps Supplied in a blow-moulded plastic case
Draper Expert Universal Pressure Test Kit (15 Piece)
• Designed to test and measure the pressure in vehicle cooling systems via the radiator or expansion tank and intended for tr... moreade use • A capless tester, it uses a cone adaptor system to seal and pressurise the cooling system • Cone adaptors may be used to replace both screw and bayonet-type cap fittings • The kit includes a pump with gauge and release pin for depressurisation prior to detachment, four system adaptors and ten radiator cap testing adaptors for use on a wide range of vehicle applications • Supplied in a sturdy, blow-moulded plastic caseThis universal pressure test kit is designed to test and measure the pressure in vehicle cooling systems via the radiator or expansion tank and is intended for trade use. A capless tester, it uses a cone adaptor system to seal and pressurise the cooling system. Cone adaptors may be used to replace both screw and bayonet-type cap fittings. The kit includes a hand pump with a gauge to enable simple, easily controlled testing, with a release pin for depressurisation prior to detachment. There are also four universal cone adaptors and ten radiator cap testing adaptors for use on a wide range of vehicles. The kit is supplied in a sturdy, blow-moulded plastic case.1 x Pump with gauge4 x Cone adaptors: 17-24, 28-31.5, 37-39.5, 47-48.5mm1 x Radiator cap adaptor 21: Ford (after 2010) pressure caps1 x Radiator cap adaptor 22: Toyota and Honda pressure caps1 x Radiator cap adaptor 23: Mitsubishi, Ford, Nissan and Mazda pressure caps1 x Radiator cap adaptor 24: Nippon and Hino pressure caps1 x Radiator cap adaptor 25: Renault and Audi/VW pressure caps1 x Radiator cap adaptor 26: Volvo, Citroen, Renault, Fiat and Peugeot pressure caps1 x Radiator cap adaptor 27: Opel, VW and Ford pressure caps1 x Radiator cap adaptor 28: Volvo and Renault pressure caps1 x Radiator cap adaptor 29: BMW pressure caps1 x Radiator cap adaptor 30: Mercedes-Benz pressure capsSupplied in a blow-moulded plastic caseTechnical Specification:Pack Quantity: 15 Product Type: Automotive ToolsDimensions: Length: 465mm x Height: 410mmWeight: 5.01KgWarranty: Lifetime
Designed to test and measure the pressure in vehicle cooling systems via the radiator or expansion tank and intended for trade use Features: A capless tester, it uses a cone adaptor system to seal and pressurise the cooling system Cone adaptors may be used to replace both screw and bayonet-type cap fittings The kit includes a pump with gauge and release pin for depressurisation prior to detachment, four system adaptors and ten radiator cap testing adaptors for use on a wide range of vehicle applications Supplied in a sturdy, blow-moulded plastic case Specifications: Dimensions: H:46.5 x W:11.0 x D:41.0 cm Colour: Blue Guarantee:Lifetime Material: Metal Model Number: 21439
Product description is based on database from online stores. Be sure to verify all information directly with seller before purchasing.
This website uses cookies. Proceeding to use this website gives your consent for gathering and processing your data for analytic and marketing purposes.
