Ecor Pro DH3511 45 Litre Commercial

110V 45 Litre DH3511 Desiccant Industrial Dehumidifier (Equivalent to a 90 litre compressor dehumidifier). This item is made from a solid steel construction with tough epoxy paint finish. Used for: Fresh water boats / Industrial Processes / Garages / Hire Industry / Out Buildings / Flood Areas. Very small for its 45 litre capacity. Will dry 247 and dry even at temperatures as low as -20°C. Can work up to 35°C. Perfect for any climate.. Can be carried by one person and transported easily with the carrying handle. No water container to empty. Instead the water is expelled via a 80mm air duct to the outside (standard size). Self regulating energy usage that adapts to air pressure differences using always the right amount of power to dry effectively.. Designed in the UK as a unit fit for industrial drying. The DH3500 Ecor Pro 4 Hole desiccant dehumidifier and was even built for use in the hire industry. Many configurations if installed. Input process air is dust filtered & dried. Input air can be ducted in with a 125mm duct (5″ inches). Wet exhaust air can be ducted out via a 80mm duct. Used in sealed storage units in museums, banks, military applications, offices & server rooms etc.. Ecor Pro’s research shows that the DH3511 will be four to seven times faster at drying buildings at low temperatures than a traditional compressor dehumidifiers.. Highly Compact - Perhaps the smallest 45 Litre dehumidifier in the market. Dust Filter - The DH3511 desiccant industrial dehumidifier benefits from a simple reticulated dust filter in metal frame that can be shaken clean or easily replaced to prevent dust particles entering the unit and impeding performance.. Easy Repair - Maintenance and eventual repair have been thought through with an easy to remove cover that gives easy access to replace cord sets or warn parts by a qualified persons quickly. Prolonging the lifetime of the DH3511 dehumidifier. Cord sets can be replaced in around 20 minutes.. On Four Feet - Anti scratch plastic feet. Carrying Handle - Easy to carry by one person. The handle can be removed if the product is being installed. The handles also protect the industrial dehumidifier duct flanges if in transit.. Humidistat Connection - The DH3511 has no humidistat but one can be added very simply. A military standard connector is on the front of the DH3511. To this the remote humidistat EPHUM220 can be screwed in place to switch on / off the dehumidifier at the humidity you set.. Duct Air-In & Out - The DH3511 has all ducts fitted with flanges to allow ducting to be added with 125mm hard or flexible ducting.. Regen Air- In & Out - The DH3511 has a second fan compared to the DH2511 which has only one. Both do not produce water. The moisture is vented away allowing it to work in colder temperatures. The moisture is purged from the system by "Regen" air. This air can be drawn from outside the room being dried. Both wet air-out and the regen air-in can be ducted away with 80mm ducting either