only bike inner tubesin all categories
only bike inner tubes
United Kingdom

Peaty's x Chris King Long Tubeless Valves PT-PTV2-80-BLK (MK2)

Photos - Bike Inner Tube Peaty's x Chris King Long Tubeless Valves PT-PTV2-80-BLK(MK2)
from £21.00 
Peaty's x Chris King (MK2) Long Tubeless Valves PT-PTV2-80-BLK
from £21.00 

Buy Peaty's x Chris King Long Tubeless Valves PT-PTV2-80-BLK (MK2)

When you make a purchase through links on our site, we may earn an affiliate commission.

Peaty´s Chris King Presta Valves

With design, sustainability & quality running right to the core, there's only one company we could work with on our valve col... moreours - Chris King! With our valves for life guarantee and their stunning colourways, your bike is in for a real treat for years to come.Made from premium lightweight, high strength 7075 aluminium, Peaty's MK2 Tubeless Valves fit most tubeless setups from MTB to road and cyclocross, including carbon, enduro and DH rims.Our unique x-cut base has been designed to work with all tyre inserts. The channels cut into the base of the valve allow air and sealant to pass through when inserts are pushed up against them. Unlike most other insert-compatible valves, our valves have a 'straight-through' design so there's no reduction of sealant or airflow when tyre inserts are not used.Fitting couldn't be easier. integrated o-rings prevent the lock rings from scratching your precious rims and large soft rubber bases easily create an airtight seal.Designed by riders, for riders. Our valves come as standard with an integrated valve core remover cap and spoke key cap (for standard 3.4mm spoke nipples). This makes tightening loose spokes and topping up with sealant a breeze, either in the workshop or out on the trails.Crushed a rubber or snapped an o-ring? No problem, check out our maintenance kits to spruce up your valves when swapping to your next set of wheels or a new bike.Instructions:- Remove valve cap, o-ring and lock nut- Insert valve through valve hole in rim- Push the o-ring onto valve stem- Thread the lock nut onto valve stem- hand tighten lock nut until firm- Screw on valve cap
Bikeinn
Delivery: in United Kingdom
Report
£21.49
Buy in shop

Peaty's Peaty's X Chris King MK2 Tubeless Valves Valve Black 80.0 PTV2-80-

With design, sustainability & quality running right to the core, there’s only one company we could work with on valve c... moreolours - chris king! MK2 Still made Made from lightweight anodised 7075 aluminium as standard, new MK2 tubeless valves are now compatible with all rim inserts and come with a spoke key cap as well as a valve core removal cap. Insert compatible base The addition of a unique four-way x-cut base to enables valves to now work with all tyre inserts. The channels cut into the base of the valve allow air and sealant to pass through when inserts are pushed up against them. Unlike most other insert-compatible valves, valves have a ‘straight-through’ design so there’s no reduction of sealant or air flow when tyre inserts are not used. All of this with no added weight! What Size? MK2 valves come in 42 mm, 60 mm and 80 mm lengths. This means that whatever the depth of your rim, we have valves to fit your needs. As a rough guide, We recommend: MTB, Urban and XC rims: 42 mm Road rims: 60 mm Deep Section Road rims: 80 mm Always measure your rims before purchasing or contact your Rim manufacturer for further recommendations. Fitting instructions Remove valve cap, o-ring and lock nut. Insert valve through valve hole in rim. Push the o-ring onto valve stem. Thread the lock nut onto valve stem. Hand tighten lock nut until firm. Screw on valve cap. Valve Length (mm): 80.0 Type of Product: Valve Original Colour by Producer: Black Material: Aluminium Colour: Black
Muziker.co.uk
Delivery: in United Kingdom
Report
£24.90
Buy in shop

Peatys Products Tubeless MK2 - Black

With design, sustainability & quality running right to the core, theres only one company we could work with on our valve colo... moreurs - Chris King! With our valves for life guarantee and their stunning colourways, your bike is in for a real treat for years to come. Made from premium lightweight, high strength 7075 aluminium, Peatys MK2 Tubeless Valves fit most tubeless setups from MTB to road and cyclocross, including carbon, enduro and DH rims. Our unique x-cut base has been designed to work with all tyre inserts. The channels cut into the base of the valve allow air and sealant to pass through when inserts are pushed up against them. Unlike most other insert-compatible valves, our valves have a straight-through design so theres no reduction of sealant or air flow when tyre inserts are not used. Fitting couldnt be easier. integrated o-rings prevent the lock rings from scratching your precious rims and large soft rubber bases easily create an airtight seal. Designed by riders, for riders. Our valves come as standard with an integrated valve core remover cap and spoke key cap (for standard 3. 4mm spoke nipples). This makes tightening loose spokes and topping up with sealant a breeze, either in the workshop or out on the trails. Crushed a rubber or snapped an o-ring? No problem, check out our maintenance kits to spruce up your valves when swapping to your next set of wheels or new bike. INSTRUCTIONS Remove valve cap, o-ring and lock nut. Insert valve through valve hole in rim. Push the o-ring onto valve stem. Thread the lock nut onto valve stem. Hand tighten lock nut until firm. Screw on valve cap.
Evanscycles.com
Delivery: in United Kingdom
Report
£32.99
Buy in shop

Peaty's X Chris King Tubeless MK2 Valves Black PT-PTV2-80-BLK

With design, sustainability & quality running right to the core, there's only one company we could work with on our valve col... moreours - Chris King! With our valves for life guarantee and their stunning colourways, your bike is in for a real treat for years to come.Made from premium lightweight, high strength 7075 aluminium, Peaty's MK2 Tubeless Valves fit most tubeless setups from MTB to road and cyclocross, including carbon, enduro and DH rims.Our unique x-cut base has been designed to work with all tyre inserts. The channels cut into the base of the valve allow air and sealant to pass through when inserts are pushed up against them. Unlike most other insert-compatible valves, our valves have a straight-through design so there's no reduction of sealant or air flow when tyre inserts are not used.Fitting couldn't be easier. integrated o-rings prevent the lock rings from scratching your precious rims and large soft rubber bases easily create an airtight seal.Designed by riders, for riders. Our valves come as standard with an integrated valve core remover cap and spoke key cap (for standard 3.4mm spoke nipples). This makes tightening loose spokes and topping up with sealant a breeze, either in the workshop or out on the trails.Crushed a rubber or snapped an o-ring? No problem, check out our maintenance kits to spruce up your valves when swapping to your next set of wheels or new bike.INSTRUCTIONSRemove valve cap, o-ring and lock nut.Insert valve through valve hole in rim.Push the o-ring onto valve stem.Thread the lock nut onto valve stem.Hand tighten lock nut until firm.Screw on valve cap.
Teamcycles.com
Delivery: in United Kingdom
Report
£32.99
Buy in shop

Peaty's x Chris King (MK2) Long Tubeless Valves PT-PTV2-80-BLK

Peaty's x Chris King (MK2) Long Tubeless Valves Peaty’s MK2 Tubeless Valves bring style and functionality to tubeless setup.... moreSold in pairs, they are designed to match Chris King’s component colours. One aluminium valve cap doubles as a core remover tool, while the other serves as a spoke key, ideal for quick repairs on the trail. Their innovative design allows compatibility with inserts-;the cross-cut base enables air and sealant to flow even when pressed against an insert. Constructed from durable 7075 aluminium, these valves feature a replaceable rubber base to extend their lifespan.
Sigmasports.com
Delivery: to United Kingdom
Report
£33.00
Buy in shop
Peaty's x Chris King (MK2) Long Tubeless Valves Peaty’s MK2 Tubeless Valves bring style and functionality to tubeless setup. Sold in pairs, they are designed to match Chris King’s component colours. One aluminium valve cap doubles as a core remover tool, while the other serves as a spoke key, ideal for quick repairs on the trail. Their innovative design allows compatibility with inserts-;the cross-cut base enables air and sealant to flow even when pressed against an insert. Constructed from durable 7075 aluminium, these valves feature a replaceable rubber base to extend their lifespan.
Product description is based on database from online stores. Be sure to verify all information directly with seller before purchasing.

Guide to key Xiaomi sub-brandsThe Chinese corporation Xiaomi operates over two hundred subsidiaries.
How to choose a memory cardTips on choosing memory cards for smartphones, cameras, video recorders, action cameras and other digital equipment
How to place an order?How to add store?
Remember that online store is responsible for accuracy of information about price, warranty and delivery!
You may be interested in