Peaty's Holeshot Tubeless Puncture Plugger Kit PT-PPR-TPP-BLK
Buy Peaty's Holeshot Tubeless Puncture Plugger Kit PT-PPR-TPP-BLK
When you make a purchase through links on our site, we may receive a affiliate commission.
|
| Peaty´s Repair KitEach Kit Comes With One Sheet Of 3mm Plugs And One Sheet Of 1.5mm Plugs Which Store Wrapped Around The Fork, Neatly Hidden Away Inside The Tool Pod.Features:- The Quickest And Easiest Way To Fix Punctures That Sealant Can´t- Unique Single-Sided Fork Design - Simply Push And Roll The Plug Into The Hook Of The Fork- Leaves The Plug In Place Each Time... moreWithout Pulling It Back Out Of The Tyre- The Fork Is Sharp Tipped & As Slim As Possible So It Doesn'T Widen The Size Of The Hole Already There Like Most Traditional Products On The Market- Knurled Body And Ribbed Lid / Handle For Extra Grip- Weather Sealing O-Rings Make The Tool Waterproof When Assembled- Fork Made From 316 Stainless Steel- Body Made From Anodised 6061 AluminiumInstructions:- Unscrew The Lid From The Tool, Remove The Plug Sheets And Put Them Somewhere Safe- Screw The Cap Onto The Base Of The Fork To Create A Sturdy Handle- Find The Puncture And Remove Any Debris By Cleaning The Hole Using The Spikey Knurled Texture On The Fork Shaft- Choose The Right Sized Plug To Fill The Hole, It´s Always Best To Go Slightly Bigger Than The Hole - Too Small And It'Ll Pull Back Out Again- Roll The Middle Of The Plug Tightly Into The Dip Of The Fork- Pinch The Tyre Tightly To Isolate The Puncture Then - Taking Care Not To Push Too Far In And Pierce The Rim Tape - Push The Plug Into The Hole, Leaving About 10mm Sticking Out- Pull Out The Fork, Making Sure You Leave The Plug Inside The Tyre- Wrap The Plug Sheets Back Around The Fork And Screw The Lid Back On.- Re-Inflate To The Right Pressure With Your Holeshot Co2 Tyre Inflator BikeinnDelivery: in United Kingdom Report | £15.99 | ![Bikeinn](/logo_shop/115389.png) | |
|
| Peatys Holeshot Tubeless Puncture Plugger Kit PT-PPR-TPP-BLKPeaty's unique single-sided fork design allows for multiple plug sizes to be easily rolled into the dip of the fork and pushed straight into the tyre. The open side to the fork then allows for the tool to be easily pulled back out of the hole without pulling the plug out with it.Key Features:Available in 12x Chris King colours.Quick and easy to ins... moreert tyre plugs. With our unique single-sided fork design, you simply push and roll the plug into the hook of the fork.With no tight gap to squeeze through, the plug is far less likely to pull back out when the tool is extracted the fork is sharp tipped & as slim as possible so it doesn't widen the size of the - hole already there.Fork made from 316 stainless steel.Body made from anodised 6061 aluminium.Knurled body and ribbed lid / handle for extra grip.Weather sealing o-rings make the tool waterproof when assembled.Each kit comes with one sheet of 3x 1.5mm and one sheet of 3x 3mm plugs.Made from high quality 316 Stainless steel, the fork is designed to be as short as possible to reduce the chance of you puncturing your rim tape when inserting a plug. The fork has also been designed with a reaming texture on the shaft, to clean out punctures before plugging, and to be as slim as possible, so it doesn't widen the size of the hole already there.Shrinking down to a tiny 65mm x 19mm, this tool has been designed to easily fit into your pocket or slot into a tool wrap or backpack.With knurling on the tool base and ribbing on the lid, you shouldn't have any issues gripping the tool, even in the muddiest of conditions.Simply unscrew the lid and thread it onto the rear of the tool to make a sturdy handle to hold onto while inserting the plug.This pack includes three thick (3mm) plugs and three thin (1.5mm) plugs. These plug sheets can be neatly wrapped around the fork and stored neatly inside the compact water-sealed body. Holeshot refill plug sheets also sold separately packaged with cardboard header cards & in biodegradable bags. Tredz.co.ukDelivery: in United Kingdom Report | £19.49 | ![Tredz.co.uk](/logo_shop/119465.png) | |
|
| Peaty's Holeshot Tubeless Puncture Plugger Kit PT-PPR-TPP-BLKPeaty's Holeshot Tubeless Puncture Plugger Kit Peaty's unique single-sided fork design enables quick, effective plug insertion, allowing multiple plug sizes to be easily rolled into the fork's dip and pushed directly into the tyre. The open side of the fork makes tool removal simple, preventing the plug from being pulled back out. Crafted from hig... moreh-quality 316 stainless steel, the short fork design minimises the risk of puncturing rim tape during plug insertion. It also features a reaming texture on the shaft to clean punctures before plugging, while its slim profile ensures the hole size isn't increased. Compact at just 65mm x 19mm, this tool is ideal for pocket carry or storing in a tool wrap or backpack. The knurled tool base and ribbed lid provide a solid grip, even in muddy conditions. For added stability, the lid can be unscrewed and attached to the tool's rear to create a sturdy handle. This pack includes three thick (3mm) and three thin (1.5mm) plugs, which can be wrapped around the fork and stored within the compact, water-sealed body. Holeshot refill plug sheets are available separately, packaged in biodegradable bags with cardboard headers. Sigmasports.comDelivery: to United Kingdom Report | £25.00 | ![Sigmasports.com](/logo_shop/115795.png) | |
Peaty's Holeshot Tubeless Puncture Plugger Kit Peaty's unique single-sided fork design enables quick, effective plug insertion, allowing multiple plug sizes to be easily rolled into the fork's dip and pushed directly into the tyre. The open side of the fork makes tool removal simple, preventing the plug from being pulled back out. Crafted from high-quality 316 stainless steel, the short fork design minimises the risk of puncturing rim tape during plug insertion. It also features a reaming texture on the shaft to clean punctures before plugging, while its slim profile ensures the hole size isn't increased. Compact at just 65mm x 19mm, this tool is ideal for pocket carry or storing in a tool wrap or backpack. The knurled tool base and ribbed lid provide a solid grip, even in muddy conditions. For added stability, the lid can be unscrewed and attached to the tool's rear to create a sturdy handle. This pack includes three thick (3mm) and three thin (1.5mm) plugs, which can be wrapped around the fork and stored within the compact, water-sealed body. Holeshot refill plug sheets are available separately, packaged in biodegradable bags with cardboard headers.
The product description is generated based on data from online stores. Before purchasing be sure to verify all information directly with the seller.
How to place an order?How to add store?Remember that the online store is responsible for the accuracy of information regarding price, warranty, and delivery!