United Kingdom

Peaty´s Kit Repair Kit

Photos - Bicycle Parts Peaty´s Kit Repair Kit
Peaty´s Kit Repair Kit
from £16.00 

Buy Peaty´s Kit Repair Kit

When you make a purchase through links on our site, we may earn an affiliate commission.

Peaty´s Kit Repair Kit

Each Kit Comes With One Sheet Of 3mm Plugs And One Sheet Of 1.5mm Plugs Which Store Wrapped Around The Fork, Neatly Hidden Away Inside The Tool Pod.Features:- The Quickest And Easiest Way To Fix Punctures That Sealant Can´t- Unique Single-Sided Fork Design - Simply Push And Roll The Plug Into The Hook Of The Fork- Leaves The Plug In Place Each Time... moreWithout Pulling It Back Out Of The Tyre- The Fork Is Sharp Tipped & As Slim As Possible So It Doesn'T Widen The Size Of The Hole Already There Like Most Traditional Products On The Market- Knurled Body And Ribbed Lid / Handle For Extra Grip- Weather Sealing O-Rings Make The Tool Waterproof When Assembled- Fork Made From 316 Stainless Steel- Body Made From Anodised 6061 AluminiumInstructions:- Unscrew The Lid From The Tool, Remove The Plug Sheets And Put Them Somewhere Safe- Screw The Cap Onto The Base Of The Fork To Create A Sturdy Handle- Find The Puncture And Remove Any Debris By Cleaning The Hole Using The Spikey Knurled Texture On The Fork Shaft- Choose The Right Sized Plug To Fill The Hole, It´s Always Best To Go Slightly Bigger Than The Hole - Too Small And It'Ll Pull Back Out Again- Roll The Middle Of The Plug Tightly Into The Dip Of The Fork- Pinch The Tyre Tightly To Isolate The Puncture Then - Taking Care Not To Push Too Far In And Pierce The Rim Tape Push The Plug Into The Hole, Leaving About 10mm Sticking Out- Pull Out The Fork, Making Sure You Leave The Plug Inside The Tyre- Wrap The Plug Sheets Back Around The Fork And Screw The Lid Back On.- Re-Inflate To The Right Pressure With Your Holeshot Co2 Tyre Inflator
Bikeinn
Delivery: in United Kingdom
Report
£16.49

Peatys Products Tubeless Puncture Plugger Kit - Red

Peaty's unique single-sided fork design allows for multiple plug sizes to be easily rolled into the dip of the fork and pushed straight into the tyre. The open side to the fork then allows for the tool to be easily pulled back out of the hole without pulling the plug out with it. Made from high quality 316 Stainless steel, the fork is designed to b... moree as short as possible to reduce the chance of you puncturing your rim tape when inserting a plug. The fork has also been designed with a reaming texture on the shaft, to clean out punctures before plugging, and to be as slim as possible, so it doesnt widen the size of the hole already there. Shrinking down to a tiny 65mm x 19mm, this tool has been designed to easily fit into your pocket or slot into a tool wrap or backpack. With knurling on the tool base and ribbing on the lid, you shouldnt have any issues gripping the tool, even in the muddiest of conditions. Simply unscrew the lid and thread it onto the rear of the tool to make a sturdy handle to hold onto while inserting the plug. This pack includes three thick (3mm) plugs and three thin (1. 5mm) plugs. These plug sheets can be neatly wrapped around the fork and stored neatly inside the compact water-sealed body. Holeshot refill plug sheets also sold separately packaged with cardboard header cards & in biodegradable bags. Features Available in 12x Chris King colours. Quick and easy to insert tyre plugs. With our unique single-sided fork design, you simply push and roll the plug into the hook of the fork. With no tight gap to squeeze through, the plug is far less likely to pull back out when the tool is extracted the fork is sharp tipped & as slim as possible so it doesnt widen the size of the - hole already there. Fork made from 316 stainless steel. Body made from anodised 6061 aluminium. Knurled body and ribbed lid / handle for extra grip. Weather sealing o-rings make the tool waterproof when assembled. Each kit comes with one sheet of 3x 1. 5mm and one s
Evanscycles.com
Delivery: in United Kingdom
Report
£24.99
Each Kit Comes With One Sheet Of 3mm Plugs And One Sheet Of 1.5mm Plugs Which Store Wrapped Around The Fork, Neatly Hidden Away Inside The Tool Pod.Features:- The Quickest And Easiest Way To Fix Punctures That Sealant Can´t- Unique Single-Sided Fork Design - Simply Push And Roll The Plug Into The Hook Of The Fork- Leaves The Plug In Place Each Time Without Pulling It Back Out Of The Tyre- The Fork Is Sharp Tipped & As Slim As Possible So It Doesn'T Widen The Size Of The Hole Already There Like Most Traditional Products On The Market- Knurled Body And Ribbed Lid / Handle For Extra Grip- Weather Sealing O-Rings Make The Tool Waterproof When Assembled- Fork Made From 316 Stainless Steel- Body Made From Anodised 6061 AluminiumInstructions:- Unscrew The Lid From The Tool, Remove The Plug Sheets And Put Them Somewhere Safe- Screw The Cap Onto The Base Of The Fork To Create A Sturdy Handle- Find The Puncture And Remove Any Debris By Cleaning The Hole Using The Spikey Knurled Texture On The Fork Shaft- Choose The Right Sized Plug To Fill The Hole, It´s Always Best To Go Slightly Bigger Than The Hole - Too Small And It'Ll Pull Back Out Again- Roll The Middle Of The Plug Tightly Into The Dip Of The Fork- Pinch The Tyre Tightly To Isolate The Puncture Then - Taking Care Not To Push Too Far In And Pierce The Rim Tape Push The Plug Into The Hole, Leaving About 10mm Sticking Out- Pull Out The Fork, Making Sure You Leave The Plug Inside The Tyre- Wrap The Plug Sheets Back Around The Fork And Screw The Lid Back On.- Re-Inflate To The Right Pressure With Your Holeshot Co2 Tyre Inflator
Product description is based on database from online stores. Be sure to verify all information directly with seller before purchasing.

How to place an order?How to add store?
Remember that online store is responsible for accuracy of information about price, warranty and delivery!