Peatys Products LinkLube Dry Refill Pouch - Multi
Buy Peatys Products LinkLube Dry Refill Pouch - Multi
When you make a purchase through links on our site, we may earn an affiliate commission.
|
| Peatys LinkLube Dry Refill Pouch 360ml PT-PDL-360LinkLube Dry is a readily biodegradable, wax-based chain lube for use in desert dry and dusty, to mildly moist conditions. Our unique formula uses a blend of waxes suspended in a water-based emulsion to give you a long-lasting, clean-running, quiet chain.Key FeaturesWax based formulation lasts longer in dry, dusty conditions as it does not attract... moredirt.Blue indicator dye easily shows when lube is dry and ready to ride readily biodegradable.Up to ~300km / 190miles per application (depending on conditions).Rounded tip to the applicator cap rolls easily over the chain when applying.Unique tall and slim bottle is shaped to fit like a pen in your hand to make application easy. Tredz.co.ukDelivery: in United Kingdom Report | £18.99 | | |
|
| Recharge lubrifiant conditions sec poche de recharge Peaty's Link Lube BleLINK LUBE DRY is a lubricant based biodegradable wax, used in desert conditions at dry and slightly damp .
The unique formula PEATY'S uses a blend of waxes suspended in a emulsion with base of'water to give you a chain and transmission durable, xml-ph-0031@deepl.i
L'emulsion to base d'water carries the wax into every corner of your links and... morerollers, leaving behind it a coating hard and slippery for xml-ph-0031@deepl.i
Just the'apply on a chain clean and dry and of the let dry a few minutes to that'it becomes transparent.
Pocket of refill 360ml Velo-store.co.ukDelivery: in United Kingdom Report | £20.01 | | |
|
| Peaty´s Link Dry Chain Lubricant 360mlPEATY'S Link Dry Chain Lubricant is a high-performance bicycle chain lubricant designed to keep your chain running smoothly and efficiently. With a clear and black color scheme, this 360ml bottle of chain lubricant is perfect for all types of bikes. This chain lubricant is specifically formulated to repel dirt, grime, and water, keeping your chain... moreclean and reducing wear and tear on your drivetrain. The dry formula means it won't attract dirt or dust like wet lubes, ensuring your chain stays well-lubricated and running quietly.Whether you're a casual rider or a competitive cyclist, PEATY'S Link Dry Chain Lubricant is the perfect choice for maintaining your bike's chain. Simply apply a few drops to your chain and enjoy a smooth, efficient ride every time. BikeinnDelivery: in United Kingdom Report | £20.99 | | |
|
| Peatys Products LinkLube Dry Refill Pouch - MultiLink Lube Dry is a readily biodegradable, wax-based chain lube for use in desert dry and dusty, to mildly moist conditions. Our unique formula uses a blend of waxes suspended in a water-based emulsion to give you a long-lasting, clean-running, quiet chain. Key Features Wax based formulation lasts longer in dry, dusty conditions as it does not attra... morect dirt. Blue indicator dye easily shows when lube is dry and ready to ride readily biodegradable. Up to ~300km / 190miles per application (depending on conditions). Rounded tip to the applicator cap rolls easily over the chain when applying. Unique tall and slim bottle is shaped to fit like a pen in your hand to make application easy. Available in 60ml, 120ml and 360ml refill pouches. Application When applied for the first time, it is essential that Link Lube Dry is applied to a well-degreased and dry drivetrain. If a chain is dirty, then dirt and old lube take up space in the rollers, preventing new lube from reaching the places it needs to, and any residual oil-based lube can also result in reduced durability and premature blackening. Fully degrease before applying fresh lube to ensure there is no old chain oil present. For best results use Peatys Foaming Drivetrain Degreaser or, in the case of brand new chains, use Peatys XXX solvent degreaser to remove stubborn waterproof factory greases. Ensure you thoroughly rinse your chain with clean water after degreasing (degreaser is designed to eat chain lube after all). Allow chain to dry thoroughly before application. Apply to the inside face of the chain only. The light blue colour to the chain lube allows you to see exactly where you have and havent applied. Keep the chain cycling for 20 seconds to help the lube penetrate fully into the pins and rollers. Check for over-application. You can tell if you over-apply Link Lube dry because youll see the lube start to fill the narrow chain links. If this happens, just slowly cycle through your gears a few times to t Evanscycles.comDelivery: in United Kingdom Report | £27.50 | | |
Link Lube Dry is a readily biodegradable, wax-based chain lube for use in desert dry and dusty, to mildly moist conditions. Our unique formula uses a blend of waxes suspended in a water-based emulsion to give you a long-lasting, clean-running, quiet chain. Key Features Wax based formulation lasts longer in dry, dusty conditions as it does not attract dirt. Blue indicator dye easily shows when lube is dry and ready to ride readily biodegradable. Up to ~300km / 190miles per application (depending on conditions). Rounded tip to the applicator cap rolls easily over the chain when applying. Unique tall and slim bottle is shaped to fit like a pen in your hand to make application easy. Available in 60ml, 120ml and 360ml refill pouches. Application When applied for the first time, it is essential that Link Lube Dry is applied to a well-degreased and dry drivetrain. If a chain is dirty, then dirt and old lube take up space in the rollers, preventing new lube from reaching the places it needs to, and any residual oil-based lube can also result in reduced durability and premature blackening. Fully degrease before applying fresh lube to ensure there is no old chain oil present. For best results use Peatys Foaming Drivetrain Degreaser or, in the case of brand new chains, use Peatys XXX solvent degreaser to remove stubborn waterproof factory greases. Ensure you thoroughly rinse your chain with clean water after degreasing (degreaser is designed to eat chain lube after all). Allow chain to dry thoroughly before application. Apply to the inside face of the chain only. The light blue colour to the chain lube allows you to see exactly where you have and havent applied. Keep the chain cycling for 20 seconds to help the lube penetrate fully into the pins and rollers. Check for over-application. You can tell if you over-apply Link Lube dry because youll see the lube start to fill the narrow chain links. If this happens, just slowly cycle through your gears a few times to t
Product description is based on database from online stores. Be sure to verify all information directly with seller before purchasing.
How to place an order?How to add store?Remember that online store is responsible for accuracy of information about price, warranty and delivery!