Kondor Blue EDC Multi-Tool Bit Driver KBEDCMTBK (Raven Black)
 |
 |
Close
Buy Kondor Blue EDC Multi-Tool Bit Driver KBEDCMTBK (Raven Black)
When you make a purchase through links on our site, we may earn an affiliate commission.
Kondor Blue EDC Multi-Tool Bit Driver (Raven Black) KBEDCMTBK | £90.47 |  | |||
Kondor Blue EDC MULTI-TOOL BIT DRIVER KBEDCMTBK | £91.40 |  | |||
Kondor Blue EDC Multi-Tool Bit Driver (Raven Black)
Who doesn’t love a good multi-tool? In our years of prepping on and off set we’ve used the gamut of tools and been left wanting. Have you ever fallen in love with a tool only to have an essential bit strip or break? Or is a critical tool not included causing you to have to carry multiple…multi-tools. Ya it got annoying for us too so we set out to make one tool system to be the EDC (Every Day Carry) Multi-tool.
The Kondor Blue EDC Multi-tool is a bit-based tool using the ever popular ?” shank bits which allows us to maximize the amount of bits you can carry limit weight and provide unlimited configuration. Bits are better period. They’re non-proprietary to the tool and if one of the hardened still bits happens to strip break or get left behind it’s easy to replace.
The Zippo inspired flip lid has an ever-so-satisfying magnetic closure. Within the bit chamber 5x ?” x 1” bits can be stored. At the end of the tool 3x additional ?” x 2” bits can be stored and held in by spring-loaded ball bearings. These slots have even been calibrated to have playful tactile feedback. Press the bits in and they’ll spring back into place making the EDC Multi-tool double as a fun fidget toy. The stock 2” bits are 3mm 4mm and flat head are the most commonly used amongst camera accessories so the extra length will be helpful for a range of applications.
The EDC Multi-tool features two main modes: Driver and Torque. In either mode bits are held magnetically in place. Driver mode uses bits at the top of the tool for a quick screwdriver-like feel. Torque mode inserts the bits on the side—either at the end or the center—to provide more leverage when needing to get a little extra push when tightening or loosening a bolt. You can even load bits at multiple locations at a time speeding up rig assembly time.
Multi-tools often seem to have legs of their own so we’ve included a lanyard loop at the top of the belt clip so you can know where your EDC tool is at all times. The EDC Multi-tool also features a bubble line level and a large magnet for holding spare. Precision machined the Kondor Blue EDC Multi-tool is in a league of its own. It’s an easy add-on to fit any of your assembly workflows.
- Features
- Type Camera Rigs & Cages
Who doesn’t love a good multi-tool? In our years of prepping on and off set we’ve used the gamut of tools and been left wanting. Have you ever fallen in love with a tool only to have an essential bit strip or break? Or is a critical tool not included causing you to have to carry multiple…multi-tools. Ya it got annoying for us too so we set out to make one tool system to be the EDC (Every Day Carry) Multi-tool.
The Kondor Blue EDC Multi-tool is a bit-based tool using the ever popular ?” shank bits which allows us to maximize the amount of bits you can carry limit weight and provide unlimited configuration. Bits are better period. They’re non-proprietary to the tool and if one of the hardened still bits happens to strip break or get left behind it’s easy to replace.
The Zippo inspired flip lid has an ever-so-satisfying magnetic closure. Within the bit chamber 5x ?” x 1” bits can be stored. At the end of the tool 3x additional ?” x 2” bits can be stored and held in by spring-loaded ball bearings. These slots have even been calibrated to have playful tactile feedback. Press the bits in and they’ll spring back into place making the EDC Multi-tool double as a fun fidget toy. The stock 2” bits are 3mm 4mm and flat head are the most commonly used amongst camera accessories so the extra length will be helpful for a range of applications.
The EDC Multi-tool features two main modes: Driver and Torque. In either mode bits are held magnetically in place. Driver mode uses bits at the top of the tool for a quick screwdriver-like feel. Torque mode inserts the bits on the side—either at the end or the center—to provide more leverage when needing to get a little extra push when tightening or loosening a bolt. You can even load bits at multiple locations at a time speeding up rig assembly time.
Multi-tools often seem to have legs of their own so we’ve included a lanyard loop at the top of the belt clip so you can know where your EDC tool is at all times. The EDC Multi-tool also features a bubble line level and a large magnet for holding spare. Precision machined the Kondor Blue EDC Multi-tool is in a league of its own. It’s an easy add-on to fit any of your assembly workflows.
- Features
- Type Camera Rigs & Cages
Product description is based on database from online stores. Be sure to verify all information directly with seller before purchasing.
The best aquarium enclosures with panoramic windowsTurning Your PC into a Small Work of Art
How to choose a processor for a video card and vice versaLet's figure out how to choose the right combination of processor and video card to avoid a bottleneck
How to place an order?How to add store?
Remember that online store is responsible for accuracy of information about price, warranty and delivery!
