BIAMP Commercial Audio ZONE4 Built-in display 913.1513.900
 | Expecting restock Codec support: Outputs: Headphone outputs: |
 |
Close
ZONE4 Pre-Amplifier
5 Years Warranty
The sophisticated pre-amplifier ZONE4 allows you to control four stereo zones with just one affordable unit. In any of the 4 zones you can play music that comes from one of the 4 music sources you can connect.
There is also the possibility to assign 3 microphones to each zone where MIC1 can be a dynamic priority mic (via contact closure) or a 4-zone selective paging microphone (MICPAT-4). Each signal is assignable to any of the four output zones through dipswitches on the front and the back of the unit. Phantom power supply on MIC 1 & 2 can be activated via a dip switch.
The ZONE4 can be controlled from the front panel (with digital display) via the RS232-connector or via the IR serial. On top of that you can control the unit via the ZONE4R remote control panels. Thes control panels have a clear LED status display and buttons for music level MIC/MIX level source select and mute controls. Because the remote is wired with a normal CAT5 cable it is very easy to install.
On the output side there is a line input selector and music level control per zone. A clear digital display makes it easier to monitor the functioning of the unit. Further there are independent MIC-MIX level control and bass-treble control per zone.
The unit is 19” format and comes standard with removable brackets. The removable metal cover (included) protects your MIC-settings.
Previously APART
- Features
- Type Pre-Amplifier
- Weight 2.75 Kg
- Dimensions W x D x H 483 x 205 x 44 mm
- Warranty 5 Years
5 Years Warranty
The sophisticated pre-amplifier ZONE4 allows you to control four stereo zones with just one affordable unit. In any of the 4 zones you can play music that comes from one of the 4 music sources you can connect.
There is also the possibility to assign 3 microphones to each zone where MIC1 can be a dynamic priority mic (via contact closure) or a 4-zone selective paging microphone (MICPAT-4). Each signal is assignable to any of the four output zones through dipswitches on the front and the back of the unit. Phantom power supply on MIC 1 & 2 can be activated via a dip switch.
The ZONE4 can be controlled from the front panel (with digital display) via the RS232-connector or via the IR serial. On top of that you can control the unit via the ZONE4R remote control panels. Thes control panels have a clear LED status display and buttons for music level MIC/MIX level source select and mute controls. Because the remote is wired with a normal CAT5 cable it is very easy to install.
On the output side there is a line input selector and music level control per zone. A clear digital display makes it easier to monitor the functioning of the unit. Further there are independent MIC-MIX level control and bass-treble control per zone.
The unit is 19” format and comes standard with removable brackets. The removable metal cover (included) protects your MIC-settings.
Previously APART
- Features
- Type Pre-Amplifier
- Weight 2.75 Kg
- Dimensions W x D x H 483 x 205 x 44 mm
- Warranty 5 Years
Product description is based on database from online stores. Be sure to verify all information directly with seller before purchasing.
All about USB-C interfaceExploring the possibilities of USB-C: from universal charging and high-speed data transfer to image streaming
What is LTPO display in mobile technology and how does it workLet's figure out what an LTPO screen with an adaptive refresh rate is and how it differs from a regular OLED
We recommendCompare using chart →
Bluetooth amplifier, portable, 320 mW, 16 – 150 Ohm, 115 dB, Gain Control, for iPod/iPhone
