Gorilla Epoxy 25ml

Gorilla Epoxy sets in just 5 minutes, delivering a strong, durable bond which dries crystal clear. The two-part, gap-filling formula is water resistant and even withstands extreme temperatures. The easy-to-use syringe dispenses an equal amount of resin and hardener, that when mixed together creates a permanent bond on a wide range of materials. Features & BenefitsSets in 5 minutes - Fast setting formula which dries crystal clear.Strong and Durable - Holds up to 240kg / cm? (3400 PSI).Easy-to-use syringe - Syringe dispenses evenly and includes a cap for multiple uses.Gap Filling - Fills voids and bonds uneven surfaces.How to UsePREPARE: Protect work area from spills. All surfaces should be clean, dry. To improve adhesion, roughen smooth surfaces with sandpaper before gluing. Remove black cap from middle of plunger. With tip pointing upward, snap the tamper seal off the syringe and eliminate air by slowly pushing plunger until resin and hardener are at the tip. 1. DISPENSE & MIX: Dispense even amounts of resin and hardener onto a clean, disposable surface. The package blister can be used as a mixing tray. Mix for at least 20 seconds until mixture is uniform. To close, pull plunger slightly back, wipe syringe tip with a clean, dry cloth and replace cap. 2. APPLY: Apply to surface within 5 minutes. Bond strength will decrease the longer you wait to apply. 3. GRIP: Grip objects together and leave undisturbed 30 minutes. You can use clamps, heavy objects or Gorilla Tape to achieve gripping pressure. Full cure achieved in 24 hours.To close, slightly pull back on plunger, wipe tip with a dry cloth and then replace cap tightly. Store in a cool, dry place away from children & animals.Specifications 25ml Set time: 5 minutes Full cure time: 24 hours Water resistant