Scangrip FLASH 300 LED Torch 03.5132
![]() |
Buy Scangrip FLASH 300 LED Torch 03.5132
When you make a purchase through links on our site, we may receive a affiliate commission.
Scangrip® 03.5132 Flash 300 Torch 300 Lumens SCG035132 | £28.44 | ![]() | |||
SCANGRIP Flash 300 Torch 300 lumens 03.5132 | £32.86 | ![]() | |||
Scangrip FLASH 300 LED Torch 03.5132 | £32.95 | ![]() | |||
Scangrip FLASH 300 LED Torch 03.5132 | £32.95 | ![]() |
The SCANGRIP® FLASH 300 Torch features a magnetic on/off switch with boost mode enabling you to increase the light output from 150 to 300 lumen. Hold down the on/off switch for two seconds to activate boost mode. The flashlight automatically turns to NORMAL mode after 60 seconds. A focus function allows you to vary the beam angle from 10° to 70°, from concentrated and focused light beam angle to long-distance light. Light output reaches up to 100m. The housing is made of anodised aluminium for high durability and an ergonomic, safe grip. Waterproof, IP54. Tested according to the ANSI/NEMA FL1 standard. Supplied with: 3 x AAA Batteries, 1 x Clip-on Holster and 1 x Manual. Specifications: Luminous Flux Max./Min.: 300/150 Lumen.Illuminance, Max./Min.(@0,5m): 10,000/600 Lux.Illuminance Distance: 0.50m.Beam Angle: 10-60°.Beam Distance: 100m.Power Source: 3 x AAA Batteries.IP Rating: IP54Dimensions (LxW): 133 x 32mmWeight 0.12kg.Additional Information:• Battery Type: AAA Cell• Max. Lumen Output: 300• Battery Supplied: Yes
The product description is generated based on data from online stores. Before purchasing be sure to verify all information directly with the seller.

Types of LEDs: Classification, Labeling, and Key ParametersEverything you need to know about LEDs before choosing lighting fixtures

Lawn mower or trimmer: which is better to choose?The different types of garden tools for grass mowing are described below
How to place an order?How to add store?
Remember that the online store is responsible for the accuracy of information regarding price, warranty, and delivery!
We recommendCompare using chart →