Buy Bostitch S28075 28° Bright Smooth Shank Stick Nails 2.8 X 75Mm BOSS28075 (Pack 2000)
When you make a purchase through links on our site, we may receive a affiliate commission.
Bostitch S28075 28° Bright Smooth Shank Stick Nails 2.8 X 75Mm (Pack 2000) BOSS28075
Stick Nails for use with the Stanley Bostitch Wire Weld Framing Nailers the traditional wire weld collation gives the stick... morenails more rigidity and resistance to damp environments. 28° Collation Angle Designed for the construction market where it is important to find the right combination of tool weight and working autonomy. Since sticks contain fewer nails than coiled nails (approx. 25) and less of them are loaded into the nailer the tool is lighter. A simpler feed mechanism for stick nails also helps to keep the weight of the tools lower than for coil nailers for similar size nails. This is important when you are working up a ladder with your arm stretched out. (Remember only tools fitted with sequential trip should be used when working up a ladder). Smooth shank nails have exactly that: a smooth appearance. Due to their regular form they can be produced at very high speed and are therefore the most economical type of nail. However their holding power is the lower than ring shank nails. They require less energy to drive them and the air consumption per nail can be lower. Sometimes it is possible to use a smaller tool to drive them. Ring shank nails have a series of rings punched into the surface of the shank. Again a difference in the diameter of the shank is produced making it even more difficult to withdraw the nail. Ring shank nails have to be produced at lower speeds and their cost is generally higher than for a smooth shank nail. The air consumption per nail is also higher and the energy required to drive these nails into hard wood is very much greater. Bright finish is without any form of protection and is the most economical choice but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required for example a one way disposal pallet. As all standard nails come with this finish. Galvanising or coating with Zinc is the best way to prevent nails from corroding. The zinc does not protect the steel of the nail but is corroded first. The thicker the zinc coating the longer it will be before the nail is attacked. The thickest coating is called hot dipped and is applied by dipping the nails into a bath of molten zinc. Galvanised protection is measured in Microns (each Micron is 0.000001 of an metre thick). The thicker the micron coating the better the protection level of the nails.Gauge/Diameter (mm) 2.8 Length 7528° Collation Angle SKU S28075 Profile PLAIN Finish BRIGHT Description STICK NAIL 2.80-75 PLAIN 2M Qty per box 2000 Will also fit the N80SB FW28WW-E N100SPTDBOSS28075
Bostitch S28075 2.8x75mm Smooth Shank Stick NailsThese Bostitch S28075 stick nails are designed for professional use with nai... morel guns. Featuring a smooth shank and a bright finish, they are suitable for general construction and framing applications. The 28° collation angle ensures efficient loading and firing.Features 2.8mm diameter 75mm length 28° collation angleSpecifications Brand: Bostitch MPN: S28075 EAN: 5902013010296 Shank: Smooth Profile: Plain Finish: Bright Quantity per box: 2000
The 75mm Bostitch Smooth Stick Nails in packs of 2000 are designed for heavier framing applications requiring deeper penetrat... moreion and stronger structural connections. With a 2.8mm gauge and bright finish, these plain shank nails offer excellent value for interior construction projects where extended length is needed. At 75mm, these nails provide the additional penetration depth required for fixing thicker timber sections, multi-layer assemblies, and substantial framing members. The bright finish makes them the most economical choice for interior applications, temporary works, or situations where corrosion protection is not a priority. The smooth shank design maintains the advantages of lower driving energy and reduced air consumption, making them efficient to use throughout long working days. Wire weld collation ensures the stick nails remain rigid and feed reliably through your nailer, even in challenging site conditions. Compatible with the N80SB, FW28WW-E, and N100S nailers, each pack contains 2000 nails. Features and Benefits: • 75mm length ideal for heavier framing and thicker timber sections • 2.8mm gauge provides reliable structural holding power • Bright finish for cost-effective interior applications • Smooth shank for efficient driving with lower energy requirements • Wire weld collation maintains rigidity in damp conditions • Pack of 2000 nails for extended productivity Specifications: Shank Type: Smooth Head Diameter (mm): 2.8 Length (mm): 75 Finish: Bright Pack Qty.: 2000
Bostitch 28 Degree Smooth Stick Nails 75mm Pack of 2000
The 75mm Bostitch Smooth Stick Nails in packs of 2000 are designed for heavier framing applications requiring deeper penetrat... moreion and stronger structural connections. With a 2.8mm gauge and bright finish, these plain shank nails offer excellent value for interior construction projects where extended length is needed. At 75mm, these nails provide the additional penetration depth required for fixing thicker timber sections, multi-layer assemblies, and substantial framing members. The bright finish makes them the most economical choice for interior applications, temporary works, or situations where corrosion protection is not a priority. The smooth shank design maintains the advantages of lower driving energy and reduced air consumption, making them efficient to use throughout long working days. Wire weld collation ensures the stick nails remain rigid and feed reliably through your nailer, even in challenging site conditions. Compatible with the N80SB, FW28WW-E, and N100S nailers, each pack contains 2000 nails. Features and Benefits: • 75mm length ideal for heavier framing and thicker timber sections • 2.8mm gauge provides reliable structural holding power • Bright finish for cost-effective interior applications • Smooth shank for efficient driving with lower energy requirements • Wire weld collation maintains rigidity in damp conditions • Pack of 2000 nails for extended productivity Specifications: Shank Type: Smooth Head Diameter (mm): 2.8 Length (mm): 75 Finish: Bright Pack Qty.: 2000
The 75mm Bostitch Smooth Stick Nails in packs of 2000 are designed for heavier framing applications requiring deeper penetrat... moreion and stronger structural connections. With a 2.8mm gauge and bright finish, these plain shank nails offer excellent value for interior construction projects where extended length is needed. At 75mm, these nails provide the additional penetration depth required for fixing thicker timber sections, multi-layer assemblies, and substantial framing members. The bright finish makes them the most economical choice for interior applications, temporary works, or situations where corrosion protection is not a priority. The smooth shank design maintains the advantages of lower driving energy and reduced air consumption, making them efficient to use throughout long working days. Wire weld collation ensures the stick nails remain rigid and feed reliably through your nailer, even in challenging site conditions. Compatible with the N80SB, FW28WW-E, and N100S nailers, each pack contains 2000 nails. Features and Benefits: • 75mm length ideal for heavier framing and thicker timber sections • 2.8mm gauge provides reliable structural holding power • Bright finish for cost-effective interior applications • Smooth shank for efficient driving with lower energy requirements • Wire weld collation maintains rigidity in damp conditions • Pack of 2000 nails for extended productivity Specifications: Shank Type: Smooth Head Diameter (mm): 2.8 Length (mm): 75 Finish: Bright Pack Qty.: 2000
Stick Nails for use with the Stanley Bostitch Wire Weld Framing Nailers the traditional wire weld collation gives the stick nails more rigidity and resistance to damp environments. 28° Collation Angle Designed for the construction market where it is important to find the right combination of tool weight and working autonomy. Since sticks contain fewer nails than coiled nails (approx. 25) and less of them are loaded into the nailer the tool is lighter. A simpler feed mechanism for stick nails also helps to keep the weight of the tools lower than for coil nailers for similar size nails. This is important when you are working up a ladder with your arm stretched out. (Remember only tools fitted with sequential trip should be used when working up a ladder). Smooth shank nails have exactly that: a smooth appearance. Due to their regular form they can be produced at very high speed and are therefore the most economical type of nail. However their holding power is the lower than ring shank nails. They require less energy to drive them and the air consumption per nail can be lower. Sometimes it is possible to use a smaller tool to drive them. Ring shank nails have a series of rings punched into the surface of the shank. Again a difference in the diameter of the shank is produced making it even more difficult to withdraw the nail. Ring shank nails have to be produced at lower speeds and their cost is generally higher than for a smooth shank nail. The air consumption per nail is also higher and the energy required to drive these nails into hard wood is very much greater. Bright finish is without any form of protection and is the most economical choice but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required for example a one way disposal pallet. As all standard nails come with this finish. Galvanising or coating with Zinc is the best way to prevent nails from corroding. The zinc does not protect the steel of the nail but is corroded first. The thicker the zinc coating the longer it will be before the nail is attacked. The thickest coating is called hot dipped and is applied by dipping the nails into a bath of molten zinc. Galvanised protection is measured in Microns (each Micron is 0.000001 of an metre thick). The thicker the micron coating the better the protection level of the nails.Gauge/Diameter (mm) 2.8 Length 7528° Collation Angle SKU S28075 Profile PLAIN Finish BRIGHT Description STICK NAIL 2.80-75 PLAIN 2M Qty per box 2000 Will also fit the N80SB FW28WW-E N100SPTDBOSS28075
The product description is generated based on data from online stores. Before purchasing be sure to verify all information directly with the seller.
