Vision HDMI-over-IP Receiver AV receiver Black TC-HDMIIPRX/3

Name: Vision HDMI-over-IP Receiver AV receiver Black TC-HDMIIPRX/3
Brand: Vision
Price: 97 GBP
Availability: InStock

Photos - Media Player Vision HDMI-over-IP Receiver AV receiver Black TC-HDMIIPRX/3

How to buy

from £97.00 up to £123.00

Compare prices ₅ →

When you make a purchase through links on our site, we may receive a affiliate commission.

Backtotheoffice.co.uk →	£96.99	Quzo.co.uk →	£103.88
Pcnova.co.uk →	£120.43	LaptopHub.uk →	£120.43
Gamingkit.co.uk →	£122.84

Buy Vision HDMI-over-IP Receiver AV receiver Black TC-HDMIIPRX/3

When you make a purchase through links on our site, we may receive a affiliate commission.


	Vision HDMI-over-IP Receiver AV receiver Black TC-HDMIIPRX/3 Distributes HDMI via a network. H.265 compression. One-to-One directly over a LAN or directly. One-to-Many over LAN. IR Pass-... morethrough. USB 1.1 transmission. The TC-HDMIIP/3 converts HDMI signal into TCP/IP packets for transmission over a standard LAN network. With no visible loss of video quality it is perfect for corporate and digital signage applications.. Beware of cheap alternatives that flood your network!. USB Over Network. It can support USB version 1.1 from the transmitter to all receivers. Each receiver has two USB ports for adding flexibility. This is for USB peripherals like keyboard, mice, but not applications that demand high bandwidth like interactive displays.. Scalable. Transmitters and receivers sold separately so you can scale your system.. Advanced EDID Copy. A reset button restores EDID to default, or for advanced applications holding either of the reset buttons down will copy the display EDID to the transmitter.. One to Many. Need to display one source on many screens? This product multi-casts, so you can have one transmitter for the source, and over 100 x receivers can sit on the network – one for each display. Only one transmitter per network.. Point to Point without LAN. Connect one transmitter directly to a receiver and completely bypass a network. This will work with a standard CAT6 cable up to 150 m (492 ft) on a high quality cable.. Maximum Length. When using a LAN the signal will be repeated by each node on the network, resulting in unlimited length.. HD. Fully HDCP 1.4 compliant, it supports resolutions up to 1920 x 1200 @ 60 Hz.. Audio. Digital audio which is encoded on the HDMI signal is transmitted.. IR Pass-Through. Control the source device from the display with the IR pass-through. An IR blaster and receiver cable is included, and it supports standard 20-60 kHz IR signals.. Plug and Play. EDID (extended display identification data) is automatically passed through. Just connect everything together and it will work immediately.. H.265 Compression. Video is compressed using the H.265 protocol. Images are full colour with smooth motion.. LAN Protocols. Despite using the standard IP protocols you don’t need to be a network engineer. All end points must be on the same subnet… that’s all you need to know. For best results use a stand-alone network for this system.. Dual-Power. This product requires a power supply for each transmitter and receiver. It does not use PoE.. Unmanaged Switch. Many video-over-IP solutions require a managed switch so that IGMP snooping can be enabled, but in this case no advanced switch setup is required. A low cost unmanaged switch can be used.. Multiple Sources. If you need more than one source to be distributed over one physical LAN you can use Virtual LANs to separate the topologies. The systems are kept separate and cannot be used as a matrix. A DHCP switch assigns IP addresses to each end point and is used to create the vLANs.. Auto Standby. If the input is shut off the display Backtotheoffice.co.uk Delivery: in United Kingdom Report	£96.99 Buy in shop

	Vision HDMI-over-IP Receiver AV receiver Black TC-HDMIIPRX/3 The TC-HDMIIP/3 converts HDMI signal into TCP/IP packets for transmission over a standard LAN network. With no visible loss o... moref video quality it is perfect for corporate and digital signage applications. Beware of cheap alternatives that flood your network! USB Over Network It can support USB version 1.1 from the transmitter to all receivers. Each receiver has two USB ports for adding flexibility. This is for USB peripherals like keyboard mice but not applications that demand high bandwidth like interactive displays. Scalable Transmitters and receivers sold separately so you can scale your system. Advanced EDID Copy A reset button restores EDID to default or for advanced applications holding either of the reset buttons down will copy the display EDID to the transmitter. One to Many Need to display one source on many screens? This product multi-casts so you can have one transmitter for the source and over 100 x receivers can sit on the network one for each display. Only one transmitter per network. Point to Point without LAN Connect one transmitter directly to a receiver and completely bypass a network. This will work with a standard CAT6 cable up to 150 m (492 ft) on a high quality cable. Maximum Length When using a LAN the signal will be repeated by each node on the network resulting in unlimited length. HD Fully HDCP 1.4 compliant it supports resolutions up to 1920 x 1200 @ 60 Hz. Audio Digital audio which is encoded on the HDMI signal is transmitted. IR Pass-Through Control the source device from the display with the IR pass-through. An IR blaster and receiver cable is included and it supports standard 20-60 kHz IR signals. Plug and Play EDID (extended display identification data) is automatically passed through. Just connect everything together and it will work immediately. H.265 Compression Video is compressed using the H.265 protocol. Images are full colour with smooth motion. LAN Protocols Despite using the standard IP protocols you dont need to be a network engineer. All end points must be on the same subnet thats all you need to know. For best results use a stand-alone network for this system. Dual-Power This product requires a power supply for each transmitter and receiver. It does not use PoE. Unmanaged Switch Many video-over-IP solutions require a managed switch so that IGMP snooping can be enabled but in this case no advanced switch setup is required. A low cost unmanaged switch can be used. Multiple Sources If you need more than one source to be distributed over one physical LAN you can use Virtual LANs to separate the topologies. The systems are kept separate and cannot be used as a matrix. A DHCP switch assigns IP addresses to each end point and is used to create the vLANs. Auto Standby If the input is shut off the display will be allowed to go to sleep. Not Backward Compatible This version uses a Sigmastar chipset and is not compatible with the previous v2 Quzo.co.uk Delivery: to United Kingdom Report	£103.88 Buy in shop

	Vision HDMI-over-IP Receiver AV receiver Black Vision HDMI-over-IP Receiver AV receiver Black The TC-HDMIIP/3 converts HDMI signal into TCP/IP packets for transmission over... morea standard LAN network. With no visible loss of video quality it is perfect for corporate and digital signage applications.Beware of cheap alternatives that flood your network!USB Over NetworkIt can support USB version 1.1 from the transmitter to all receivers. Each receiver has two USB ports for adding flexibility. This is for USB peripherals like keyboard. mice. but not applications that demand high bandwidth like interactive displays. ScalableTransmitters and receivers sold separately so you can scale your system.Advanced EDID CopyA reset button restores EDID to default. or for advanced applications holding either of the reset buttons down will copy the display EDID to the transmitter.One to ManyNeed to display one source on many screens? This product multi-casts. so you can have one transmitter for the source. and over 100 x receivers can sit on the network – one for each display. Only one transmitter per network.Point to Point without LANConnect one transmitter directly to a receiver and completely bypass a network. This will work with a standard CAT6 cable up to 150 m (492 ft) on a high quality cable.Maximum LengthWhen using a LAN the signal will be repeated by each node on the network. resulting in unlimited length.HDFully HDCP 1.4 compliant. it supports resolutions up to 1920 x 1200 @ 60 Hz.AudioDigital audio which is encoded on the HDMI signal is transmitted.IR Pass-ThroughControl the source device from the display with the IR pass-through. An IR blaster and receiver cable is included. and it supports standard 20-60 kHz IR signals.Plug and PlayEDID (extended display identification data) is automatically passed through. Just connect everything together and it will work immediately.H.265 CompressionVideo is compressed using the H.265 protocol. Images are full colour with smooth motion.LAN ProtocolsDespite using the standard IP protocols you don’t need to be a network engineer. All end points must be on the same subnet… that’s all you need to know. For best results use a stand-alone network for this system.Dual-PowerThis product requires a power supply for each transmitter and receiver. It does not use PoE.Unmanaged SwitchMany video-over-IP solutions require a managed switch so that IGMP snooping can be enabled. but in this case no advanced switch setup is required. A low cost unmanaged switch can be used.Multiple SourcesIf you need more than one source to be distributed over one physical LAN you can use Virtual LANs to separate the topologies. The systems are kept separate and cannot be used as a matrix. A DHCP switch assigns IP addresses to each end point and is used to create the vLANs.Auto StandbyIf the input is shut off the display will be allowed to go to sleep.Not Backward CompatibleThis version uses a Sigmastar chipset and is not compatible with the previous v2 product which uses a HiSilicon chipset. Pcnova.co.uk Delivery: in United Kingdom Report	£120.43 Buy in shop

	Vision HDMI-over-IP Receiver AV receiver Black TC-HDMIIPRX/3 Vision HDMI-over-IP Receiver AV receiver Black LaptopHub.uk Delivery: in United Kingdom Report	£120.43 Buy in shop

	Vision HDMI-over-IP Receiver AV receiver Black TC-HDMIIPRX/3 The TC-HDMIIP/3 converts HDMI signal into TCP/IP packets for transmission over a standard LAN network. With no visible loss o... moref video quality it is perfect for corporate and digital signage applications.Beware of cheap alternatives that flood your network!USB Over NetworkIt can support USB version 1.1 from the transmitter to all receivers. Each receiver has two USB ports for adding flexibility. This is for USB peripherals like keyboard. mice. but not applications that demand high bandwidth like interactive displays. ScalableTransmitters and receivers sold separately so you can scale your system.Advanced EDID CopyA reset button restores EDID to default. or for advanced applications holding either of the reset buttons down will copy the display EDID to the transmitter.One to ManyNeed to display one source on many screens? This product multi-casts. so you can have one transmitter for the source. and over 100 x receivers can sit on the network – one for each display. Only one transmitter per network.Point to Point without LANConnect one transmitter directly to a receiver and completely bypass a network. This will work with a standard CAT6 cable up to 150 m (492 ft) on a high quality cable.Maximum LengthWhen using a LAN the signal will be repeated by each node on the network. resulting in unlimited length.HDFully HDCP 1.4 compliant. it supports resolutions up to 1920 x 1200 @ 60 Hz.AudioDigital audio which is encoded on the HDMI signal is transmitted.IR Pass-ThroughControl the source device from the display with the IR pass-through. An IR blaster and receiver cable is included. and it supports standard 20-60 kHz IR signals.Plug and PlayEDID (extended display identification data) is automatically passed through. Just connect everything together and it will work immediately.H.265 CompressionVideo is compressed using the H.265 protocol. Images are full colour with smooth motion.LAN ProtocolsDespite using the standard IP protocols you don’t need to be a network engineer. All end points must be on the same subnet… that’s all you need to know. For best results use a stand-alone network for this system.Dual-PowerThis product requires a power supply for each transmitter and receiver. It does not use PoE.Unmanaged SwitchMany video-over-IP solutions require a managed switch so that IGMP snooping can be enabled. but in this case no advanced switch setup is required. A low cost unmanaged switch can be used.Multiple SourcesIf you need more than one source to be distributed over one physical LAN you can use Virtual LANs to separate the topologies. The systems are kept separate and cannot be used as a matrix. A DHCP switch assigns IP addresses to each end point and is used to create the vLANs.Auto StandbyIf the input is shut off the display will be allowed to go to sleep.Not Backward CompatibleThis version uses a Sigmastar chipset and is not compatible with the previous v2 product which uses a HiSilicon chipset. Vision HDMI-over-IP Receiver AV receiver Black Gamingkit.co.uk Delivery: in United Kingdom Report	£122.84 Buy in shop

The TC-HDMIIP/3 converts HDMI signal into TCP/IP packets for transmission over a standard LAN network. With no visible loss of video quality it is perfect for corporate and digital signage applications.

Beware of cheap alternatives that flood your network!

USB Over Network
It can support USB version 1.1 from the transmitter to all receivers. Each receiver has two USB ports for adding flexibility. This is for USB peripherals like keyboard mice but not applications that demand high bandwidth like interactive displays.

Scalable
Transmitters and receivers sold separately so you can scale your system.

Advanced EDID Copy
A reset button restores EDID to default or for advanced applications holding either of the reset buttons down will copy the display EDID to the transmitter.

One to Many
Need to display one source on many screens? This product multi-casts so you can have one transmitter for the source and over 100 x receivers can sit on the network one for each display. Only one transmitter per network.

Point to Point without LAN
Connect one transmitter directly to a receiver and completely bypass a network. This will work with a standard CAT6 cable up to 150 m (492 ft) on a high quality cable.

Maximum Length
When using a LAN the signal will be repeated by each node on the network resulting in unlimited length.

HD
Fully HDCP 1.4 compliant it supports resolutions up to 1920 x 1200 @ 60 Hz.

Audio
Digital audio which is encoded on the HDMI signal is transmitted.

IR Pass-Through
Control the source device from the display with the IR pass-through. An IR blaster and receiver cable is included and it supports standard 20-60 kHz IR signals.

Plug and Play
EDID (extended display identification data) is automatically passed through. Just connect everything together and it will work immediately.

H.265 Compression
Video is compressed using the H.265 protocol. Images are full colour with smooth motion.

LAN Protocols
Despite using the standard IP protocols you dont need to be a network engineer. All end points must be on the same subnet thats all you need to know. For best results use a stand-alone network for this system.

Dual-Power
This product requires a power supply for each transmitter and receiver. It does not use PoE.

Unmanaged Switch
Many video-over-IP solutions require a managed switch so that IGMP snooping can be enabled but in this case no advanced switch setup is required. A low cost unmanaged switch can be used.

Multiple Sources
If you need more than one source to be distributed over one physical LAN you can use Virtual LANs to separate the topologies. The systems are kept separate and cannot be used as a matrix. A DHCP switch assigns IP addresses to each end point and is used to create the vLANs.

Auto Standby
If the input is shut off the display will be allowed to go to sleep.

Not Backward Compatible
This version uses a Sigmastar chipset and is not compatible with the previous v2

The product description is generated based on data from online stores. Before purchasing be sure to verify all information directly with the seller.

Best Powerline AdaptersNetworking equipment for creating and expanding local infrastructure without installation work and configuration.

Best Media Players with Ultra HD 4K SupportSmart TV boxes that provide 4K high definition video streaming.

How to place an order?How to add store?

Remember that the online store is responsible for the accuracy of information regarding price, warranty, and delivery!