Buy TP-LINK MC110CS network media converter 100 Mbit/s 1310 nm Single-mode Black
When you make a purchase through links on our site, we may receive a affiliate commission.
TP-Link MC110CS 10100M RJ45 to 100M Single-Mode SC Full Duplex up to
The MC110CS is a media converter designed to convert 100BASE-FX fibre to 100Base-TX copper media or vice versa. Designed unde... morer IEEE 802.3u 10100Base-TX and 100Base-FX standards, the MC110CS is designed for use with single-mode fibre cable utilizing
TP-Link TP-Link MC110CS network media converter 100 Mbit/s 1310 nm Single-mode Black
Complies with 802.3u 10/100Base-TX, 100Base-FX standards Auto-negotiation of Half-Duplex / Full-Duplex transfer mode Extends... morefiber distance up to 12.5 miles (20km) The MC110CS is a media converter designed to convert 100BASE-FX fiber to 100Base-TX copper media and vice versa. Designed under IEEE 802.3u 10/100Base-TX and 100Base-FX standards, the MC110CS is designed for use with single-mode fiber cable utilizing the SC-Type connector. The MC110CS supports longwave (LX) laser specification at a full wire speed forwarding rate. It works at 1310nm on both transmitting and receiving data. Auto MDI/MDI-X for TX port, Auto negotiation of duplex mode. The MC110CS will transmit at extended fiber optic distances utilizing single-mode fiber up to 12.5 miles (20km). Network Cable types supported Cat3, Cat4, Cat5 Duplex system Full, Half Auto MDI/MDI-X Yes Copper ethernet cabling technology 10BASE-T, 100BASE-FX, 100BASE-T Ethernet LAN data rates 10,100 Mbit/s Networking standards IEEE 802.3, IEEE 802.3u, IEEE 802.3x Maximum data transfer rate 100 Mbit/s Performance Fiber mode structure Single-mode Wavelength 1310 nm Maximum transfer distance 12500 m Features LED indicators Yes Product colour Black Internal No Ports & interfaces Fiber optic connector SC Fiber ports quantity 1 Ethernet LAN (RJ-45) ports 1 Connectivity technology Wired Power Power consumption (max) 2.4 W Weight & dimensions Height 27 mm Depth 73 mm Width 95 mm Operational conditions Storage relative humidity (H-H) 5 - 90% Operating relative humidity (H-H) 10 - 90% Storage temperature (T-T) -40 - 70 °C Operating temperature (T-T) 0 - 40 °C Certificates Compliance certificates RoHS Logistics data Harmonized System (HS) code 85176990
Complies with 802.3u 10/100Base-TX, 100Base-FX standards.-Ability to configure the switch for Half-Duplex / Full-Duplex trans... morefer modes for the FX port.-Increases the range of fiber optics up to 20 -60km.The MC110CS is a multimedia converter designed to convert 100BASE-FX fiber to 100Base-TX cable or vice versa.Designed to IEEE 802.3u 10/100Base-TX and 100Base-FX standards, the MC110CS is used with single-mode fiber optics using the SC connector.The MC110CS supports shortwave (SX) laser at a full wire speed transfer rate.It works at 1310nm transmitting and receiving data.Other features of this module are the possibility of use as a stand-alone device (without the need for a rack or with TP-LINK´s 19´´ system rack, Auto MDI/MDI-X for the TX port, Duplex mode autonegotiation on the TX, and status LEDs on the front panel.The MC110CS transmits using single-mode fiber optics, increasing the fiber distance up to 20 kilometers.Specifications:-Connectivity.Technology:Cable.-Fiber optic connector:SC.-Ethernet LAN ports (RJ -45):1 -Fiber Channel ports:1 -Width:94.5 mm -Depth:73 mm -Height:27 mm -Power consumption (max):1.52 W -Humidity Storage relative:5 -90% -Operating relative humidity:10 -90% -Operating temperature range:0 -40 °C -Storage temperature range:-40 -70 °C -Auto MDI / MDI-X:Yes.- Cabling.Technology:UTP 3, 4, 5e, 5.- Ethernet LAN, data transfer speed:1000 Mbit/s.- Network standards:IEEE 802.3, IEEE 802.3u, IEEE 802.3x -Maximum data transfer rate:1000 Mbit/s.-Ethernet interface type:Gigabit Ethernet.-Dimensions (Width x Depth x Height):94.5 x 73 x 27 mm.-Complete bidirectional (Full duplex):Yes.-Input and output ports (I/O):1x 100M SC.1x 100M RJ45.-LED Indicators:Power, Speed.-Product color:Black.-Industry standard compliances:IEEE 802.3, IEEE 802.3u, IEEE 802.3x.-.Certification:FCC, CE.-Internal:No.-Maximum transfer distance:20000 m.-Wavelength:1310 nm.
TP-Link MC110CS network media converter 100 Mbit/s 1310 nm Single-mode Black
Highlights: Complies With 802.3U 10/100Base-Tx 100Base-Fx Standards. Link Fault Passthrough And Far End Fault Minimiz... moree The Loss Caused By Link Failure Timely Provides Switch Configuration Of Half-Duplex / Full-Duplex Transfer Mode For Fx Port. Extends Fiber Distance Up To 20Km What This Product Does The Mc110cs Is A Media Converter Designed To Convert 100Base-Fx Fiber To 100Base-Tx Copper Media Or Vice Versa. Designed Under Ieee 802.3U 10/100Base-Tx And 100Base-Fx Standards The Mc110cs Is Designed For Use With Single-Mode Fiber Cable Utilizing The Sc-Type Connector. The Mc110cs Supports Longwave (Lx) Laser Specification At A Full Wire Speed Forwarding Rate. It Works At 1310Nm On Both Transmitting And Receiving Data. Other Features Of This Module Include The Ability To Be Used As A Stand Alone Device (No Chassis Required) Or With Tp-Link&Acute;S 19&Acute;&Acute; System Chassis Auto Mdi/Mdi-X For Tx Port Auto Negotiation Of Duplex Mode On Tx Port And Front Panel Status Leds. The Mc110cs Will Transmit At Extended Fiber Optic Distances Utilizing Single-Mode Fiber Up To 20 Kilometers.
Highlights: Complies With 802.3U 10/100Base-Tx 100Base-Fx Standards. Link Fault Passthrough And Far End Fault Minimize The Loss Caused By Link Failure Timely Provides Switch Configuration Of Half-Duplex / Full-Duplex Transfer Mode For Fx Port. Extends Fiber Distance Up To 20Km What This Product Does The Mc110cs Is A Media Converter Designed To Convert 100Base-Fx Fiber To 100Base-Tx Copper Media Or Vice Versa. Designed Under Ieee 802.3U 10/100Base-Tx And 100Base-Fx Standards The Mc110cs Is Designed For Use With Single-Mode Fiber Cable Utilizing The Sc-Type Connector. The Mc110cs Supports Longwave (Lx) Laser Specification At A Full Wire Speed Forwarding Rate. It Works At 1310Nm On Both Transmitting And Receiving Data. Other Features Of This Module Include The Ability To Be Used As A Stand Alone Device (No Chassis Required) Or With Tp-Link&Acute;S 19&Acute;&Acute; System Chassis Auto Mdi/Mdi-X For Tx Port Auto Negotiation Of Duplex Mode On Tx Port And Front Panel Status Leds. The Mc110cs Will Transmit At Extended Fiber Optic Distances Utilizing Single-Mode Fiber Up To 20 Kilometers.
The product description is generated based on data from online stores. Before purchasing be sure to verify all information directly with the seller.
