Intex Automatic Pool Cleaner Zx300 For Pool 55245

Complete your pool cleaning effortlessly with the INTEX automatic pool sweeper.For its use, a treatment plant with a flow rate between 6,056 and 13,248 liters is required.It is connected with a 38 mm thick, 6.5 meter long hose.The force of the water will cause it to move along the pool floor while the brushes lift and move the dirt towards the filter.Maintaining your removable pool with clean and healthy water is essential to fully enjoy each bath.Therefore, the best way to combat dirt in above-ground pools is to combine filtration systems or treatment plants with a maintenance kit and an automatic pool sweeper.Your tubular pool will have sparkling water! Accessories for cleaning the removable pool This automatic pool sweeper is perfect for the maintenance of removable pools.It moves around all the corners and the walls of the bottom of the pool thanks to its four wheels.The robot includes a 6.5 meter hose that must be connected to the pool water inlet.It works thanks to the pressure exerted by the purifier when removing the water through the hose.This force moves the robot along the bottom of the pool and its brushes are responsible for removing the dirt, moving the larger one to its small 1.8-liter tank (leaves and branches) and the rest towards the water outlet, where later it is filtered by the treatment plant.Characteristics, instructions for use and accessories Hydraulic robot by pressure (does not suck), it moves along the floor and the walls of the removable pool, lifting the dirt for its subsequent filtration through the treatment plant.It is connected to the pool water inlet, (the highest conduit inside the pool).Compatible with treatment plants with a flow rate between 6,056 and 13,248 liters / hour.Suitable for removable pools with a maximum diameter of 6 meters.Rotating brushes and drag brushes that lift dirt and deposit in the tank with distiller (removable and washable).It is compatible only with removable pools.(Not inflatable or buried).It incorporates a 6.5 meter hose with an anti-tangle system.38mm diameter hose.10 replacement brushes.2 replacement brush holders.INTEX hydraulic robot by pressure cleans floors and walls in pools with a maximum Ø 6 meters.- It works with a purifier:you need a purifier with a flow rate between 6.056 and 132 348 liters / hour to function properly.Instalación:se debe conectar desde el interior de la piscina,en el conducto de entrada de agua y tras desenroscar la boquilla.Use:the robot moves with the water pressure at 2,649 l / h on the floor and the walls, lifting the dirt for its subsequent filtration by the treatment plant.