Jonsbo C6 Micro-ATX Mesh Case - White C6 White

Enhance your gaming PC’s airflow with the Jonsbo C6 Mesh Micro-ATX PC Case. Four of the panels feature a fine mesh that expertly ventilates excess heat from your gaming hardware. The interior is intelligently designed to support one of two configurations, depending on the motherboard form factor utilised within. As a result, there is up to 255mm clearance for GPUs and support for ATX PSUs. The small footprint and mesh panelling make the Jonsbo C6 a stunning chassis, well suited for any gaming space. Jonsbo C6 Mesh Micro-ATX PC Case at a Glance: Micro-ATX PC case with mesh panelling on four sides Easy to remove panels thanks to tool-less design GPU clearance up to 255mm and supports ATX PSUs Different configurations for Mini-ITX and MATX motherboards Support for up to three fans and CPU coolers 75mm tall Steel chassis for enhanced durability Mesh Chassis The Jonsbo C6 Mesh Micro-ATX PC Case has been crafted to provide outstanding airflow for your gaming PC. Four out of the six faces feature a fine mesh, serving as ample ventilation for excess heat. The bottom panel has an open design, paired with a dust filter to prevent dust from infiltrating the system. To enhance airflow further, there are three places to mount fans in this chassis. The front panel can hold a 120mm fan, whilst the top and bottom panels have mounts for either 120mm or 140mm fans. What’s more, there is clearance for CPU coolers up to 75mm tall. Hardware Support The Jonsbo C6 Mesh may have a small footprint, but it can support a wide range of hardware. This includes both Mini-ITX and Micro-ATX motherboards, as well as ATX PSUs up to 185mm long. There are four expansion slots on the rear panel, to support PCIe devices. For storage, you can either install one 3.5” HDD or two 2.5” SSDs. These are mounted onto the front panel, utilising the space that can alternatively be used for a fan. Mini-ITX vs Micro-ATX Which form factor motherboard you install will affect the GPU you can add within the system. When utilising a Mini-ITX motherboard, measuring 170mm by 170mm, you can use the maximum GPU clearance of 255mm. With the 245mm by 245mm Micro-ATX motherboard, however, the configuration is a little different. If you use the first PCIe slot, then you, once again, have the full 255mm clearance. On the second slot, there is only 200mm clearance, at a maximum thickness of 48mm. Easy to Remove Panels To grant access within the chassis, the Jonsbo C6 Mesh has easy to remove panels. No tools required. Upon the back panel is a small latch that can be used to lift the top panel. Once this has been removed, the front and side panels can be removed from the interior. As a result, you have unfettered access to the interior, making the installation of your gaming hardware much simpler. Finishing Touches The Jonsbo C6 Mesh I/O panel is at the bottom of the