These Lindstrom Diagonal cutting nippers have an oval head. They are produced from high performance ball bearing steel which... moreis black oxidised for increased durability. The numerically controlled machine grinding guarantees edge and angle accuracy and contact which increases tool reliability and consistency. The edges are precision induction hardened to 63-65 HRC. The handles have a return spring and are sleeved. Ideal for wire harness work and standard printed circuit board assembly. Oval heads are the most common type of nipper head. It combines strength and durability can withstand and distribute the impact of cutting and is utilised in a myriad of applications.Length (A): 112mm (4.1/2in). Blade length (B): 12.5mm (0.5 in). Head width (C): 12.5mm (0.5 in). Head depth (D): 6.0mm (0.24 in). Tip width: (F): 1.2mm (0.05 in). Cutting capacity: 0.3-1.6mm. Cutting edge: Micro-bevel. The Micro-Bevel cut is designed to meet the requirements of the electronic assembly industry. Leads are ‘pinched’ allowing less altitude and a smaller overall surface area. Because of its design it has a wide cutting range and variety of uses.PTDLIN8150
These Lindstrom Diagonal cutting nippers have an oval head. They are produced from high performance ball bearing steel which... moreis black oxidised for increased durability. The numerically controlled machine grinding guarantees edge and angle accuracy and contact, which increases tool reliability and consistency. The edges are precision induction hardened to 63-65 HRC. The handles have a return spring and are sleeved. Ideal for wire harness work, and standard printed circuit board assembly. Oval heads are the most common type of nipper head. It combines strength and durability, can withstand and distribute the impact of cutting and is utilised in a myriad of applications.Length (A): 112mm (4.1/2in). Blade length (B): 12.5mm (0.5 in). Head width (C): 12.5mm (0.5 in). Head depth (D): 6.0mm (0.24 in). Tip width: (F): 1.2mm (0.05 in). Cutting capacity: 0.3-1.6mm. Cutting edge: Micro-bevel. The Micro-Bevel cut is designed to meet the requirements of the electronic assembly industry. Leads are ‘pinched’, allowing less altitude and a smaller overall surface area. Because of its design, it has a wide cutting range and variety of uses.Additional Information:• Length (mm): 112.5
Lindstrom 8150 Dia Cutting Nipper Micro Bevel 112mm
These Lindstrom Diagonal cutting nippers have an oval head. They are produced from high performance ball bearing steel which... moreis black oxidised for increased durability. The numerically controlled machine grinding guarantees edge and angle accuracy and contact, which increases tool reliability and consistency. The edges are precision induction hardened to 63-65 HRC. The handles have a return spring and are sleeved. Ideal for wire harness work, and standard printed circuit board assembly. Oval heads are the most common type of nipper head. It combines strength and durability, can withstand and distribute the impact of cutting and is utilised in a myriad of applications.Length (A): 112mm (4.1/2in). Blade length (B): 12.5mm (0.5 in). Head width (C): 12.5mm (0.5 in). Head depth (D): 6.0mm (0.24 in). Tip width: (F): 1.2mm (0.05 in). Cutting capacity: 0.3-1.6mm. Cutting edge: Micro-bevel. The Micro-Bevel cut is designed to meet the requirements of the electronic assembly industry. Leads are ‘pinched’, allowing less altitude and a smaller overall surface area. Because of its design, it has a wide cutting range and variety of uses.Additional Information:• Length (mm): 112.5
These Lindstrom Diagonal cutting nippers have an oval head. They are produced from high performance ball bearing steel which... moreis black oxidised for increased durability. The numerically controlled machine grinding guarantees edge and angle accuracy and contact, which increases tool reliability and consistency. The edges are precision induction hardened to 63-65 HRC. The handles have a return spring and are sleeved. Ideal for wire harness work, and standard printed circuit board assembly. Oval heads are the most common type of nipper head. It combines strength and durability, can withstand and distribute the impact of cutting and is utilised in a myriad of applications.Length (A): 112mm (4.1/2in). Blade length (B): 12.5mm (0.5 in). Head width (C): 12.5mm (0.5 in). Head depth (D): 6.0mm (0.24 in). Tip width: (F): 1.2mm (0.05 in). Cutting capacity: 0.3-1.6mm. Cutting edge: Micro-bevel. The Micro-Bevel cut is designed to meet the requirements of the electronic assembly industry. Leads are ‘pinched’, allowing less altitude and a smaller overall surface area. Because of its design, it has a wide cutting range and variety of uses.Additional Information:• Length (mm): 112.5
These Lindstrom Diagonal cutting nippers have an oval head. They are produced from high performance ball bearing steel which is black oxidised for increased durability. The numerically controlled machine grinding guarantees edge and angle accuracy and contact which increases tool reliability and consistency. The edges are precision induction hardened to 63-65 HRC. The handles have a return spring and are sleeved. Ideal for wire harness work and standard printed circuit board assembly. Oval heads are the most common type of nipper head. It combines strength and durability can withstand and distribute the impact of cutting and is utilised in a myriad of applications.Length (A): 112mm (4.1/2in). Blade length (B): 12.5mm (0.5 in). Head width (C): 12.5mm (0.5 in). Head depth (D): 6.0mm (0.24 in). Tip width: (F): 1.2mm (0.05 in). Cutting capacity: 0.3-1.6mm. Cutting edge: Micro-bevel. The Micro-Bevel cut is designed to meet the requirements of the electronic assembly industry. Leads are ‘pinched’ allowing less altitude and a smaller overall surface area. Because of its design it has a wide cutting range and variety of uses.PTDLIN8150
The product description is generated based on data from online stores. Before purchasing be sure to verify all information directly with the seller.
